Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact wired magnetic switch that opens its normally closed circuit when a door or window is opened, ideal for alarm and DIY projects. It offers a 15–25mm actuation gap, 100V/0.5A contacts, and a 30cm cable for easy integration.

Key Highlights

  • Normally closed circuit opens when magnet separates
  • 100V, 0.5A max switch current for low-voltage systems
  • 15–25mm actuation distance for flexible mounting
  • Compact 28 x 14mm white plastic housing
  • 30cm cable for simple wiring to panels or boards
  • Lightweight at 8g for discreet installation

Ideal For

  • DIY home security builders
  • Arduino and microcontroller hobbyists
  • Hotel or office maintenance teams
  • Electronics students learning sensors
  • Makers needing a simple door/window contact

Buying Tip

Confirm that your alarm panel or controller accepts a normally closed dry contact before purchasing, as this switch is not compatible with systems requiring normally open inputs without additional configuration.

Elecvora expert review

Our verdict

The MC-38 is a simple, low-cost magnetic switch that does one job well: reporting open/closed status via a normally closed contact. It is best suited to low-voltage DIY and alarm projects where a short cable and compact size are acceptable.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy to install and conceal
  • Normally closed output works with many alarm panels
  • Wide 15–25mm actuation tolerance
  • Includes mounting screws

Cons

  • Short 30cm cable may require extension
  • Not a standalone alarm; needs a panel or controller
  • Limited to low-power signal switching (0.5A max)

Best for

DIY security and automation projects with normally closed inputs

Not ideal for

Mains power switching or systems requiring normally open contacts

Specifications

Connection typeNormally Close
MaterialPlastic
ColorWhite
Contact Capacity0.5A (Max. Switch Current)
Voltage (V)100V
Power Rating10
Additional Specs.Actuation Distance (mm): 15 to 25
Cable Length30
Length (mm)28
Width (mm)14
Weight (g)8
Shipping Weight0.012 kg
Shipping Dimensions4 × 3 × 2 cm

What's in the box

  • 1 x MC-38 wired magnetic sensor switch
  • 4 x M5 screws

Frequently Asked Questions

Does this sensor require a power supply?
No, it is a passive switch. It does not need its own power; it simply opens or closes a circuit connected to your alarm panel or controller.
What does normally closed mean?
The circuit is closed (conductive) when the magnet is near the switch, and it opens when the magnet moves away, such as when a door opens.
Can I connect it directly to an Arduino?
Yes, you can wire it to a digital input with a pull-up resistor, but ensure your circuit uses low voltage and current within the 100V/0.5A contact rating.
What is the maximum gap between the magnet and switch?
The actuation distance is 15 to 25mm. For reliable operation, mount them closer to 15mm.
What is included in the package?
You get one MC-38 sensor switch and four M5 screws for mounting.
Can it be used outdoors?
The plastic housing is not specified as weatherproof, so it is best used indoors or in protected areas.

Overview

The MC-38 is a wired magnetic contact switch used to detect whether a door, window, or other opening is closed. It consists of a reed switch and a separate magnet; when the magnet is near, the normally closed circuit stays intact. When the door or window opens and the magnet moves away, the circuit opens, which can trigger an alarm or signal an open state to a controller. This makes it a straightforward building block for security and automation projects.

Key Features

  • Normally closed operation: the circuit is closed when the magnet is present and opens when the gap increases.
  • Modest contact rating: rated for up to 100V and 0.5A maximum switch current, suitable for low-power signalling.
  • Flexible actuation gap: works with a separation distance of 15 to 25mm between switch and magnet.
  • Compact and light: the white plastic body measures 28mm long and 14mm wide, weighing only 8g.
  • Pre-wired: includes a 30cm cable for connecting to alarm panels, microcontrollers, or relay inputs.

Specifications Explained

Connection type – normally closed: This means the switch conducts while the door is shut. If the wiring is cut or the magnet moves away, the circuit opens, which many alarm systems interpret as a trigger. Check that your panel or controller expects a normally closed input.

Contact capacity – 0.5A at 100V: The contacts can handle low-voltage, low-current signals. This is not a mains power switch; use it for signal-level switching only.

Actuation distance – 15 to 25mm: The magnet and switch can be separated by up to this gap and still register as closed. Mounting closer to 15mm gives more reliable detection, while up to 25mm allows for misalignment or thicker frames.

Cable length – 30cm: The attached cable provides a short lead for connecting to nearby terminals or extension wiring. Plan your cable route accordingly.

Compatibility and Requirements

The MC-38 is a passive wired switch and does not require its own power source. It works with alarm panels, microcontroller boards, and relay inputs that accept a dry contact closure and are compatible with normally closed sensors. Ensure your system’s input voltage and current are within the 100V and 0.5A contact rating. No additional resistors or modules are included; check whether your panel requires an end-of-line resistor.

Typical Uses

  • Door and window open/close detection in DIY alarm systems
  • Cabinet or sliding door status sensing
  • Arduino and other microcontroller projects
  • Hotel, office, or apartment entry monitoring
  • Automation triggers for lights or notifications

What's in the Box

1 x MC-38 wired magnetic sensor switch, 4 x M5 screws for fitting.

Quick specs

Connection type
Normally Close
Material
Plastic
Color
White
Contact Capacity
0.5A (Max. Switch Current)
Voltage (V)
100V
Power Rating
10
See all specifications