Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact I2C breakout that senses proximity up to 300mm and ambient light from 0.004 to 16,768 lux. STEMMA QT / Qwiic connectors let you connect it to Arduino or Raspberry Pi boards without soldering.

Key Highlights

  • Proximity sensing across a 0 to 300mm range
  • Ambient light detection from 0.004 to 16,768 lux
  • I2C interface using SDA and SCL pins
  • STEMMA QT / Qwiic connectors for solderless wiring
  • Adjustable integration time, sensitivity, and IR LED current
  • Works with 3.3V and 5V logic systems

Ideal For

  • Arduino developers adding presence detection to a project
  • Raspberry Pi builders measuring ambient light levels
  • Makers prototyping with solderless STEMMA QT / Qwiic cabling
  • Automation hobbyists combining proximity and brightness sensing

Buying Tip

Check that your project has a free I2C bus and order a STEMMA QT / Qwiic cable if you want to avoid soldering the included header.

Elecvora expert review

Our verdict

The VCNL4030 breakout combines proximity and light sensing on one board with genuinely wide ranges, and the STEMMA QT / Qwiic connectors make it quick to bring into a prototype. It is a sensible pick when you need both measurements from a single I2C device.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Proximity and ambient light sensing on one board
  • Very wide 0.004 to 16,768 lux light range
  • Solderless STEMMA QT / Qwiic connection option
  • Adjustable integration time, sensitivity, and LED current
  • Works with both 3.3V and 5V systems

Cons

  • Proximity detection is limited to 300mm
  • Requires a host with an I2C bus
  • Header must be soldered if you skip the Qwiic cable

Best for

Arduino and Raspberry Pi projects needing combined proximity and light sensing

Not ideal for

Long-range distance measurement beyond 300mm

Specifications

Shipping Weight0.005 kg
Shipping Dimensions11 × 7.5 × 2 cm

What's in the box

  • 1 x Adafruit VCNL4030 Proximity and Lux Sensor - STEMMA QT / Qwiic
  • 1 x 6 pin Header

Frequently Asked Questions

What can the VCNL4030 measure?
It measures proximity from 0 to 300mm and ambient light from 0.004 to 16,768 lux. Both readings are available digitally over I2C.
Which boards can I use it with?
It is listed as compatible with Arduino and Raspberry Pi platforms. Any host with an I2C bus and 3.3V or 5V logic can connect using the SDA and SCL pins.
Do I need to solder anything?
Not if you use a STEMMA QT / Qwiic cable. A 6-pin header is included for those who prefer a soldered or breadboard connection.
What voltage does it need?
The board is designed for 3.3V and 5V logic systems, so it fits common Arduino and Raspberry Pi setups.
Can I change how the sensor behaves?
Yes. Integration time, sensitivity, and IR LED current are all adjustable, letting you balance speed, accuracy, and power use.
What comes in the package?
You receive one Adafruit VCNL4030 Proximity and Lux Sensor board and one 6-pin header.

Overview

The Adafruit VCNL4030 breakout packs two sensors into one small board: a proximity detector and an ambient light sensor. Proximity readings cover 0 to 300mm, while light measurement spans an unusually wide 0.004 to 16,768 lux. Both values are delivered digitally over I2C, so your microcontroller only needs SDA, SCL, power, and ground to start reading data.

Adafruit has fitted the board with STEMMA QT / Qwiic connectors, which means you can link it to a compatible host with a ready-made cable instead of soldering. A 6-pin header is also included if you prefer a fixed connection.

Key Features

  • Dual sensing: proximity and ambient light from a single module
  • Wide light range: 0.004 to 16,768 lux covers dim rooms through bright conditions
  • Adjustable behaviour: integration time, sensitivity, and IR LED current can be tuned
  • Simple wiring: I2C communication with STEMMA QT / Qwiic connectors
  • Flexible voltage: operates on 3.3V or 5V logic systems
  • Interrupt support: lets the sensor signal your controller when a threshold is crossed

Specifications Explained

The 0 to 300mm proximity range suits near-field detection such as object presence or approach sensing. The 0.004 to 16,768 lux light range means the sensor can resolve very low light as well as bright environments, which is useful when you want one board to handle both dark and lit conditions.

Adjustable integration time lets you choose between faster updates and steadier readings. Sensitivity and IR LED current settings let you balance detection strength against power consumption. Because the board accepts 3.3V and 5V, it slots into common Arduino and Raspberry Pi projects without a level shifter.

Compatibility and Requirements

The board communicates over I2C and is listed as compatible with Arduino and Raspberry Pi platforms. You need a host board with an I2C bus and a suitable cable or header connection. The included 6-pin header can be soldered on for breadboard or permanent wiring.

Typical Uses

  • Detecting objects or hands approaching a device
  • Adjusting display or lighting behaviour based on ambient light
  • Automation projects that react to presence and brightness
  • Prototyping with solderless STEMMA QT / Qwiic cabling

What's in the Box

  • 1 x Adafruit VCNL4030 Proximity and Lux Sensor - STEMMA QT / Qwiic
  • 1 x 6-pin header

Quick specs

Shipping Weight
0.005 kg
Shipping Dimensions
11 × 7.5 × 2 cm
See all specifications