
1 / 4 · Click to enlarge
AI Summary
The GY-511 LSM303DLHC module combines a 3-axis accelerometer and magnetometer with I2C output for precise motion and heading sensing. Its 16-bit resolution and selectable ranges make it ideal for drones, robots, and navigation projects.
Key Highlights
- 3-axis accelerometer and 3-axis magnetometer in one module
- I2C digital interface for easy microcontroller connection
- 16-bit data output for high-resolution measurements
- Selectable acceleration ranges: ±2g, ±4g, ±8g, ±16g
- Selectable magnetic field ranges: ±1.3 to ±8.1 gauss
- Operates from 3 to 5 VDC for wide compatibility
Ideal For
- Drone and FPV builders needing reliable heading and motion data
- Robotics enthusiasts developing navigation systems
- Electronics hobbyists exploring motion sensing
- Students and educators learning about IMU sensors
- Makers building tilt-compensated compass projects
Buying Tip
Check that your project's I2C bus operates at 3.3V or 5V and that you have a free I2C port before purchasing this module.
Elecvora expert review
Our verdict
The GY-511 LSM303DLHC is a solid choice for adding combined acceleration and magnetic field sensing to your projects. Its high resolution and selectable ranges offer flexibility, and the I2C interface keeps wiring simple. However, it requires some setup and calibration for best results.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 16-bit resolution for precise measurements
- Selectable ranges allow optimization for different applications
- Compact and lightweight design
- Wide operating voltage range
Cons
- Requires soldering of header for breadboard use
- Magnetometer needs calibration for accurate heading
- No onboard voltage regulator, so ensure supply is within 3-5V
Best for
Makers and engineers needing a reliable 6-axis motion sensor for drones, robots, or navigation.
Not ideal for
Beginners who want a plug-and-play solution without any soldering or calibration.
Specifications
| Item Type | Accelerometer |
|---|---|
| Operating Voltage (VDC) | 3 to 5 |
| Interface Type | I2C |
| Additional Specs. | Data Output: 16 bit |
| Axis | 3 Magentic Field Axis, 3 Acceleration Axis |
| Magnetic field range | ± 1.3 to ±8.1 gauss |
| Acceleration (g) | Range: ±2g/±4g/±8g /±16g |
| Length (mm) | 20 |
| Width (mm) | 14 |
| Weight (g) | 1.2 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 8 × 1 cm |
What's in the box
- 1 x GY-511 LSM303DLHC high-precision 3 Axis electronic compass acceleration sensor module
- 1 x 8 Pin Male Header
Frequently Asked Questions
What is the difference between the accelerometer and magnetometer?
Can I use this module with a 5V microcontroller?
Do I need to calibrate the sensor?
What is included in the package?
What is the maximum acceleration this sensor can measure?
How do I connect the module to my Arduino?
Overview
The GY-511 LSM303DLHC is a high-precision sensor module that integrates a 3-axis accelerometer and a 3-axis magnetometer. It provides digital output of acceleration and magnetic field measurements via an I2C interface, making it a practical choice for motion sensing and compass applications. The module is built around the LSM303DLHC chip, which includes a 16-bit analog-to-digital converter for each axis, ensuring fine resolution. With user-selectable full-scale ranges, you can tailor the sensitivity to your specific project needs. Whether you are building a drone, a robot, or a handheld navigation device, this module delivers reliable data in a compact form factor.
Key Features
- Dual sensor integration: Combines 3-axis acceleration and 3-axis magnetic field sensing in a single module.
- High-resolution output: 16-bit data output for precise measurements.
- Flexible ranges: Acceleration range selectable from ±2g to ±16g; magnetic field range from ±1.3 to ±8.1 gauss.
- Simple connectivity: I2C interface requires only two data lines, saving microcontroller pins.
- Wide voltage compatibility: Operates from 3 to 5 VDC, suitable for both 3.3V and 5V systems.
- Compact design: Measures just 20 mm by 14 mm and weighs 1.2 grams, ideal for space-constrained builds.
Specifications Explained
Acceleration range: The accelerometer can measure up to ±16g, which is sufficient for most motion and tilt sensing applications. Lower ranges like ±2g provide higher sensitivity for subtle movements.
Magnetic field range: The magnetometer measures fields from ±1.3 to ±8.1 gauss, covering Earth's magnetic field (approximately 0.25 to 0.65 gauss) and allowing for compass heading calculations.
16-bit data output: Each axis provides 16-bit resolution, enabling detection of very small changes in acceleration or magnetic field.
I2C interface: The standard I2C protocol makes it easy to connect to popular microcontrollers like Arduino, Raspberry Pi, and others.
Operating voltage: The module accepts 3 to 5 VDC, so it can be powered directly from most development boards.
Compatibility and Requirements
The module requires a microcontroller or development board with an I2C interface and a power supply between 3 and 5 VDC. No additional components are needed for basic operation. The module comes with an 8-pin male header that can be soldered for breadboard or cable connections.
Typical Uses
- Drone and FPV flight controllers for stabilization and heading
- Robotic navigation and orientation systems
- Tilt-compensated compasses and heading indicators
- Motion-activated devices and gesture recognition
- Educational projects and sensor experimentation
What's in the Box
- 1 x GY-511 LSM303DLHC high-precision 3-axis electronic compass acceleration sensor module
- 1 x 8-pin male header
Quick specs
- Item Type
- Accelerometer
- Operating Voltage (VDC)
- 3 to 5
- Interface Type
- I2C
- Additional Specs.
- Data Output: 16 bit
- Axis
- 3 Magentic Field Axis, 3 Acceleration Axis
- Magnetic field range
- ± 1.3 to ±8.1 gauss













