
1 / 2 · Click to enlarge
At a glance
This temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; rated voltage (vdc) 1.8 to 5; interface I2C (up to 3.4MHz) SPI (up to 10 MHz). Check that your power source supplies 1.8 to 5 before connecting it.
Key Highlights
- Item Type: Sensor
- Rated Voltage (VDC): 1.8 to 5
- Interface: I2C (up to 3.4MHz) SPI (up to 10 MHz)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Rated Voltage (VDC) | 1.8 to 5 |
| Interface | I2C (up to 3.4MHz) SPI (up to 10 MHz) |
| Operating Temperature (°C) | -40 to 85 |
| Pressure Range (MPa) | 300-1100 hPa |
| I2C Address | SDO LOW: 0x76 SDO HIGH: 0x77 |
| Length (mm) | 12 |
| Width (mm) | 10 |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 6 × 8 × 2 cm |
Overview
The GY-BMP280-5V Temperature Sensor Module is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Rated Voltage (VDC): 1.8 to 5 (match this to your power supply; too high a voltage can damage the part)
- Interface: I2C (up to 3.4MHz) SPI (up to 10 MHz) (confirm your cable or board uses the same connector)
- Operating Temperature (°C): -40 to 85
- Pressure Range (MPa): 300-1100 hPa (quoted range is usually line-of-sight; walls and interference shorten it)
- I2C Address: SDO LOW: 0x76 SDO HIGH: 0x77
- Length (mm): 12 (measure your mounting space before ordering)
- Width (mm): 10 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The BMP280 is an integrated environmental sensor developed specifically for mobile applications where size and low power consumption are key design constraints.
Note: GY-BMP, BMP, HW-BMP, BMEP, and XX-BMP are self-printed markings on the PCB, functionality remains the same.
Applications:
- Context awareness, e.g. skin detection, room change detection
- Fitness monitoring/well-being
- Warning regarding dryness or high temperatures
- Measurement of volume and airflow
- Home automation control
- Control heating, ventilation, air conditioning (HVAC)
- Internet of things
- GPS enhancement (e.g. time-to-first-fix improvement, dead reckoning, slope detection)
- Indoor navigation (change of floor detection, elevator detection)
- Outdoor navigation, leisure, and sports applications
- Weather forecast
- Vertical velocity indication (rise/sink speed)
Features:
- The BMP280 is a great new chip that was originally designed for the next generation of smartphones.
- With an I2C connection, you have access to enough weather data to make some pretty good predictions for your local area.
- BMP280, the precision sensor, is soldered onto PCB.
- only the pressure and the temperature
- It uses both I2C and SPI (supports 3-, 4-wire SPI) interface
Package Includes:
1 x GY-BMP280-5V Temperature Sensor Module
Quick specs
- Item Type
- Sensor
- Rated Voltage (VDC)
- 1.8 to 5
- Interface
- I2C (up to 3.4MHz) SPI (up to 10 MHz)
- Operating Temperature (°C)
- -40 to 85
- Pressure Range (MPa)
- 300-1100 hPa
- I2C Address
- SDO LOW: 0x76 SDO HIGH: 0x77













