
1 / 3 · Click to enlarge
At a glance
This flight controller accessories is a good fit for everyday home and hobby use. Main specs: item type Blackbox Recorder; input voltage (v) 3.3V–12V (Recommended 3.3V–5V); processor ATmega328. Check that your power source supplies 3.3V–12V (Recommended 3.3V–5V) before connecting it.
Key Highlights
- Item Type: Blackbox Recorder
- Input Voltage (V): 3.3V–12V (Recommended 3.3V–5V)
- Processor: ATmega328
Ideal For
- Room or desk lighting
- Workbench lighting
- Outdoor use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Blackbox Recorder |
|---|---|
| Input Voltage (V) | 3.3V–12V (Recommended 3.3V–5V) |
| Processor | ATmega328 |
| Interface | Simple serial command |
| Clock Speed | 16 MHz |
| Current consumption | 2–3mA (Idle), 6–20mA (Recording, depending on SD card) |
| Storage Capacity | 512MB to 32GB microSD |
| Baud Rate (bps) | Up to 115200 |
| Length (mm) | 20 |
| Width (mm) | 14 |
| Weight (g) | 02 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
Overview
The GY-Openlog Cleanflight Naze32 F3 Blackbox Flash Recorder is listed in our flight controller accessories range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Blackbox Recorder
- Input Voltage (V): 3.3V–12V (Recommended 3.3V–5V) (match this to your power supply; too high a voltage can damage the part)
- Processor: ATmega328 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Interface: Simple serial command (confirm your cable or board uses the same connector)
- Clock Speed: 16 MHz (make sure the rest of your system works at this frequency)
- Current consumption: 2–3mA (Idle), 6–20mA (Recording, depending on SD card) (your supply must deliver at least this much current)
- Storage Capacity: 512MB to 32GB microSD (space for firmware, files or media)
- Baud Rate (bps): Up to 115200
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Open-source serial data logger
- ATmega328 microcontroller running at 16MHz
- FAT16 and FAT32 compatible
- Configurable baud rate up to 115200bps
- Low power consumption (2mA idle)
- 3.3V–12V input support
- Dual LED write status indicators
Package Includes:
1 x GY-Openlog Cleanflash Naze32 F3 Blackbox Flash RecorderQuick specs
- Item Type
- Blackbox Recorder
- Input Voltage (V)
- 3.3V–12V (Recommended 3.3V–5V)
- Processor
- ATmega328
- Interface
- Simple serial command
- Clock Speed
- 16 MHz
- Current consumption
- 2–3mA (Idle), 6–20mA (Recording, depending on SD card)













