
1 / 4 · Click to enlarge
AI Summary
The Hakko FX-888DX is a 230V digital soldering station with 65W ceramic heating and a 50–480°C range. It stores five presets and locks settings, giving you repeatable heat for PCB and component work.
Key Highlights
- 230V AC input with 65W ceramic heating element
- Digital temperature control from 50°C to 480°C
- Stores up to five preset temperature profiles
- Password lock prevents accidental setting changes
- Separable tip-heater assembly for easy maintenance
- Compact 100 × 120mm footprint saves bench space
Ideal For
- Electronics repair technicians
- Makers and hobbyists building prototypes
- Educational labs teaching soldering
- PCB assembly and rework specialists
- DIY enthusiasts working on wires and components
Buying Tip
Check that your mains supply is 230V AC and that the BS plug fits your outlet; an adapter may be needed outside the UK.
Elecvora expert review
Our verdict
The Hakko FX-888DX is a reliable digital soldering station with practical features like preset storage and a password lock. Its compact size and T18 tip compatibility make it a solid choice for electronics work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Digital temperature control with 50–480°C range
- Stores five presets for repeatable tasks
- Password lock prevents accidental changes
- Separable tip-heater assembly simplifies maintenance
- Compact footprint saves bench space
Cons
- Requires a 230V AC power source
- BS plug may need an adapter in some regions
- Tips and heaters are not included beyond the installed tip
Best for
Electronics repair and assembly work
Not ideal for
Those needing a battery-powered or portable soldering solution
Specifications
| Input Voltage (VAC) | 230 |
|---|---|
| Operating Temperature (°C) | 50 °C – 480 °C |
| Heating element | Ceramic |
| Output Power (W) | 65 |
| Plug Type | BS Plug |
| Tip of ground resistance | <2 Ω |
| Length (mm) | 100 |
| Width (mm) | 120 |
| Weight (g) | 1300 |
| Shipping Weight | 3 kg |
| Shipping Dimensions | 24 × 24 × 18 cm |
What's in the box
- 1 x Hakko FX-888DX 230V Soldering Station
- 1 x HandPiece FX-8801
- 1 x Iron Holder FH-800
- 1 x Cleaning Sponge
- 1 x Cleaning Wire
- 1 x Instruction Manual
Frequently Asked Questions
What is the temperature range of the Hakko FX-888DX?
Can I use different tips with this station?
What voltage does the station require?
How many presets can I store?
What is included in the box?
How do I clean and maintain the soldering tip?
Overview
The Hakko FX-888DX is a digital soldering station designed for electronics assembly and repair. It operates on 230V AC and uses a 65W ceramic heating element to reach temperatures between 50°C and 480°C. The station is controlled by a simple two-button interface that lets you adjust temperature, store presets, and lock settings. Its compact body measures 100mm in length and 120mm in width, weighing 1300g, so it sits neatly on a busy workbench. The blue and yellow housing is durable and easy to spot among tools. A separable tip-heater assembly means you can replace the tip or heater independently, reducing downtime. The station comes with the FX-8801 handpiece, FH-800 iron holder, cleaning sponge, cleaning wire, and an instruction manual.
Key Features
- Digital temperature control: Set and monitor temperatures from 50°C to 480°C using the UP and ENTER buttons.
- Preset storage: Save up to five temperature profiles for repeatable soldering tasks.
- Password lock: Prevent accidental changes to settings in shared or educational environments.
- Fast thermal recovery: The ceramic heater and separable tip design help maintain heat during continuous work.
- Compact footprint: At 100 × 120mm, the station leaves room for components and tools.
- T18-series tip compatibility: Uses widely available T18 tips for strong heat transfer and easy replacement.
Specifications Explained
The 230V AC input means this station is intended for regions with 230V mains supply. The 65W output power provides enough heat for typical PCB soldering, wire tinning, and component removal. The temperature range of 50°C to 480°C covers low-temperature work and higher-heat applications. The ceramic heating element heats up quickly and offers stable thermal performance. Tip-to-ground resistance is less than 2Ω, which helps protect sensitive components from static damage. The station weighs 1300g and measures 100mm long by 120mm wide, making it a stable but space-efficient unit.
Compatibility and Requirements
The FX-888DX requires a 230V AC power source and comes with a BS plug and a 3-wired cord. It works with the included FX-8801 handpiece and accepts T18-series tips. The separable tip-heater assembly allows replacement of either part as needed. No additional components are required for basic operation beyond what is included in the box.
Typical Uses
This soldering station is suitable for PCB assembly and repair, prototyping, wire and cable work, and general electronics maintenance. It is also useful in educational settings where consistent temperature and preset storage are beneficial. The password lock helps prevent tampering in shared environments.
What's in the Box
- 1 × Hakko FX-888DX 230V Soldering Station
- 1 × Handpiece FX-8801
- 1 × Iron Holder FH-800
- 1 × Cleaning Sponge
- 1 × Cleaning Wire
- 1 × Instruction Manual
Quick specs
- Input Voltage (VAC)
- 230
- Operating Temperature (°C)
- 50 °C – 480 °C
- Heating element
- Ceramic
- Output Power (W)
- 65
- Plug Type
- BS Plug
- Tip of ground resistance
- <2 Ω



















