Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 100 W soldering station with a composite-heater handpiece and a dual display showing set and actual tip temperature together. It holds ±3 °C stability across a 50-450 °C range for consistent joints during repair and rework.

Key Highlights

  • 100 W station power with a 95 W composite-heater handpiece
  • 50-450 °C working range with ±3 °C idle temperature stability
  • Large dual-view display shows set and actual tip temperature
  • Programmable presets plus auto-sleep and auto-shutoff functions
  • Accepts standard and micro-type handpieces for varied work
  • Compact 96 x 126 mm body with 1.2 m handpiece cord

Ideal For

  • Electronics repair technicians working on dense PCBs
  • Rework and reflow benches handling mixed component sizes
  • Prototyping labs that need repeatable tip temperature
  • Experienced hobbyists upgrading to a mains-powered station
  • Small assembly operations with limited bench space

Buying Tip

Confirm your bench supply is 230 V AC before ordering, and budget for the tips and any micro handpiece you need, since these are selected separately.

Elecvora expert review

Our verdict

The FX971 packs 100 W of heating power and a genuinely useful dual temperature display into a very small footprint. It suits technicians who want stable, repeatable heat without giving up bench space.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 96 x 126 mm body leaves bench room free
  • Dual display shows set and actual tip temperature at once
  • ±3 °C idle stability supports consistent joints
  • Composite heater recovers heat quickly under load
  • Auto-sleep and auto-shutoff help manage tip life

Cons

  • Rated for 230 V AC input only, so it is not suitable for 120 V supplies
  • Tips and micro handpieces are selected separately
  • Supplied handpiece is the standard FX-9701, so fine work needs extra parts

Best for

Repair and rework benches needing stable heat in a small footprint

Not ideal for

Users on 120 V mains or those wanting a complete micro-soldering kit out of the box

Specifications

Item TypeSoldering Station
Model No. / NameFX 971
Rated Voltage (VDC)230 V AC (input)
Power Rating100 W (Station), 95 W (Handpiece)
Operating Temperature (°C)50–450
Tip to ground potential< 2 mV
Temperature Stability±3℃ (At idle temperature)
Heating elementComposite heater
Cord length(M)1.2 m (handpiece cord)
Length (mm)96
Width (mm)126
Weight (g)1265
Shipping Weight2.535 kg
Shipping Dimensions28 × 22 × 15 cm

What's in the box

  • 1 x HAKKO FX971 100 W Soldering Station Main Unit
  • 1 x FX-9701 Handpiece
  • 1 x FH-215 Iron Holder
  • 1 x Cleaning Sponge
  • 1 x Cleaning Wire
  • 1 x USB Cable
  • 1 x Power Cord
  • 1 x Instruction Manual

Frequently Asked Questions

What voltage does the Hakko FX971 require?
The station is rated for 230 V AC input. It should only be connected to a matching 230 V supply.
What temperature range does it cover?
It operates from 50 °C to 450 °C, with temperature stability of ±3 °C at idle temperature.
Does the display show the actual tip temperature?
Yes. The large dual-view display shows the set temperature and the actual tip temperature side by side.
Are tips included with the station?
Tips are selected separately. The package includes the FX-9701 handpiece, FH-215 iron holder, cleaning sponge, cleaning wire, USB cable, power cord and instruction manual.
Can I use a micro handpiece with this station?
The station supports standard and micro-type handpieces, so a micro handpiece can be used when fitted for finer work.
What do auto-sleep and auto-shutoff do?
These functions reduce energy use and help extend tip life by lowering or cutting power when the iron is left idle.

Overview

The Hakko FX971 is a mains-powered soldering station rated at 100 W, with a handpiece rated at 95 W. It is designed for bench work where consistent heat delivery matters more than sheer size: the station body measures just 96 mm by 126 mm, so it sits comfortably beside a microscope, a rework bench or a crowded assembly area.

A composite heater inside the handpiece provides rapid thermal recovery, while the control electronics hold idle temperature within ±3 °C. The large display presents the set temperature and the actual tip temperature side by side, so you can confirm what the iron is doing without cycling through menus.

Key Features

  • 100 W station, 95 W handpiece: enough headroom for a wide spread of soldering jobs.
  • 50-450 °C range: covers low-temperature work through to higher-heat applications.
  • ±3 °C stability at idle: keeps joints repeatable during long sessions.
  • Dual-view display: set and actual tip temperature shown together.
  • Programmable presets: store and recall working temperatures quickly.
  • Auto-sleep and auto-shutoff: reduces energy use and helps extend tip life.
  • Low tip-to-ground potential: under 2 mV, useful when working on sensitive assemblies.

Specifications Explained

Power: The 100 W station rating and 95 W handpiece rating describe how much heat the system can deliver. In practice this means faster recovery when you solder larger joints or repeat many connections in sequence.

Temperature: The 50-450 °C range lets you dial down for delicate work or up for heavier thermal loads. The ±3 °C figure is quoted at idle temperature, so it describes steadiness when the iron is resting rather than actively soldering.

Tip to ground potential: At under 2 mV, the potential between tip and ground is kept low, which matters when soldering components that are sensitive to stray voltage.

Handpiece cord: The 1.2 m cord gives reasonable reach across a bench without excessive slack.

Compatibility and Requirements

The FX971 is rated for 230 V AC input, so it must be used on a 230 V supply. It supports standard and micro-type handpieces, and tips are selected separately. The supplied handpiece is the FX-9701, and the package also includes the FH-215 iron holder, cleaning sponge, cleaning wire, USB cable, power cord and instruction manual.

Typical Uses

Electronics assembly, rework and repair, prototyping, and general bench soldering. With a suitable micro-type handpiece and tip fitted, the station can also be used for finer work on small components.

What's in the Box

  • 1 x HAKKO FX971 100 W soldering station main unit
  • 1 x FX-9701 handpiece
  • 1 x FH-215 iron holder
  • 1 x cleaning sponge
  • 1 x cleaning wire
  • 1 x USB cable
  • 1 x power cord
  • 1 x instruction manual

Quick specs

Item Type
Soldering Station
Model No. / Name
FX 971
Rated Voltage (VDC)
230 V AC (input)
Power Rating
100 W (Station), 95 W (Handpiece)
Operating Temperature (°C)
50–450
Tip to ground potential
< 2 mV
See all specifications