
1 / 3 · Click to enlarge
At a glance
Made by HARDKERNEL, this odroid sbc is a good fit for everyday home and hobby use. Main specs: ram 2GB; gpu Mali-G52 GPU with 6 x Execution Engines (800Mhz); networking Optional WiFi or Ethernet USB adapters.
Key Highlights
- Small and easy to carry or mount
- RAM: 2GB
- GPU: Mali-G52 GPU with 6 x Execution Engines (800Mhz)
- Networking: Optional WiFi or Ethernet USB adapters
Ideal For
- Use on the go
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| RAM | 2GB |
|---|---|
| GPU | Mali-G52 GPU with 6 x Execution Engines (800Mhz) |
| Storage Capacity | 1 x eMMC connector (8G, 16G, 32G, 64G, and 128G are available) 1 x microSD slot (DS/HS modes up to UHS-I SDR104) |
| Networking | Optional WiFi or Ethernet USB adapters |
| External I/O | 1 x SPI 1 x UART 2 x I2C 25 x GPIO (Max) 2 x ADC input (10bit, 1.8V Max) All of the I/O signal levels is 3.3 Volt except for ADC input at max 1.8 Volt |
| Shipping Weight | 0.057 kg |
| Shipping Dimensions | 9 × 7 × 3 cm |
Overview
The ODROID N2L 2GB RAM SBC Compact Linux IoT & Robotics Development Board, made by HARDKERNEL, is listed in our odroid sbc range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- RAM: 2GB (more memory leaves room for larger programs and buffers)
- GPU: Mali-G52 GPU with 6 x Execution Engines (800Mhz) (make sure the rest of your system works at this frequency)
- Storage Capacity: 1 x eMMC connector (8G, 16G, 32G, 64G, and 128G are available) 1 x microSD slot (DS/HS modes up to UHS-I SDR104) (space for firmware, files or media)
- Networking: Optional WiFi or Ethernet USB adapters (2.4 GHz reaches further, 5 GHz is faster at short range)
- External I/O: 1 x SPI 1 x UART 2 x I2C 25 x GPIO (Max) 2 x ADC input (10bit, 1.8V Max) All of the I/O signal levels is 3.3 Volt except for ADC input at max 1.8 Volt
- Shipping Weight: 0.057 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 9 × 7 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The ODROID N2L 2GB RAM SBC Compact Linux IoT & Robotics Development Board by Hardkernel, featuring a quad-core Cortex-A73 and dual-core Cortex-A53 CPU architecture. The board is designed to offer high-performance computing capabilities in a compact and energy-efficient package, making it an ideal solution for a wide range of applications, such as media centers, gaming, home automation, and more. The ODROID-N2L board features 2GB of LPDDR4 RAM, which provides enough memory for most general-purpose computing tasks. It also comes with a built-in microSD card slot, allowing users to easily expand the onboard storage with up to 128GB of additional memory.
Features:
- Smaller and neater form factor: 69 x 56mm
- Small size allows for mounting inside a variety of small devices
- Suitable for various standalone embedded systems which don’t require Ethernet connectivity
- Suitable for building robots, drones, arcade consoles, human-machine-interface devices, and many other applications
- Faster and lower power consumption LPDDR4 RAM
- Lightweight
- Low cost
Package Includes:
1 x ODROID N2L 2GB RAM SBC Compact Linux IoT & Robotics Development Board
Quick specs
- RAM
- 2GB
- GPU
- Mali-G52 GPU with 6 x Execution Engines (800Mhz)
- Storage Capacity
- 1 x eMMC connector (8G, 16G, 32G, 64G, and 128G are available) 1 x microSD slot (DS/HS modes up to UHS-I SDR104)
- Networking
- Optional WiFi or Ethernet USB adapters
- External I/O
- 1 x SPI 1 x UART 2 x I2C 25 x GPIO (Max) 2 x ADC input (10bit, 1.8V Max) All of the I/O signal levels is 3.3 Volt except for ADC input at max 1.8 Volt
- Shipping Weight
- 0.057 kg

















