Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The HC-SR501 is a compact PIR motion sensor module with a 140° detection angle and 3.3V TTL output. Onboard potentiometers let you adjust sensitivity and delay time from 5 to 200 seconds.

Key Highlights

  • Passive infrared detection with onboard pyroelectric sensor and Fresnel lens
  • 140-degree detection angle for broad room and corridor coverage
  • Adjustable delay time from 5 to 200 seconds via potentiometer
  • Sensitivity potentiometer tunes detection distance roughly 3 m to 7 m
  • 3.3V TTL high or low output works with common microcontroller boards
  • Jumper on the back selects the trigger mode

Ideal For

  • Makers building motion-activated lighting with Arduino or Raspberry Pi
  • Students learning about PIR sensing and digital inputs
  • DIY alarm and presence-detection projects
  • Robot builders needing a simple movement trigger
  • Interactive installation and prop creators

Buying Tip

Check the jumper position on the back before mounting, since it sets the trigger mode and is easier to change before the board is fixed in place.

Elecvora expert review

Our verdict

The HC-SR501 remains a practical, low-cost motion sensing block thanks to its adjustable sensitivity and delay and its simple 3.3V TTL output. It is best treated as a basic presence trigger rather than a precision measurement device.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable sensitivity and delay on the board
  • Wide 140° detection angle
  • Simple 3.3V TTL output for common boards
  • Compact and lightweight

Cons

  • No mounting holes or enclosure included
  • Can false-trigger near heat sources or direct sunlight
  • Requires separate power and wiring

Best for

Hobbyists and students building motion-triggered projects

Not ideal for

Applications needing precise distance measurement or certified safety detection

Specifications

Item TypeSensor
Model No. / NameHC SR501
Output Type(High/ Low-level Signal) 3.3V TTL output
Operating Temperature (°C)-20°C ~ 80°C
Detection Angle140°
Delay Time5 to 200s (Can be Adjusted, Default
Dimensions (L x W x H) mm32 x 24 x 18
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions6 × 4 × 2 cm

What's in the box

  • 1 x HC-SR501 PIR motion sensor module with jumper at the back for trigger

Frequently Asked Questions

What output does the HC-SR501 provide?
It provides a 3.3V TTL high or low level signal, which can be read by a microcontroller or single-board computer.
How do I change the delay time?
Turn the delay potentiometer on the board. It adjusts the hold time from about 5 seconds to about 200 seconds.
How far can it detect motion?
The sensitivity potentiometer sets detection distance to roughly 3 m at one end and about 7 m at the other, within a 140° angle.
Which boards is it compatible with?
The product data lists Arduino, Raspberry Pi, AVR, PIC and 8051 platforms.
What is included in the package?
One HC-SR501 PIR module with a jumper fitted at the back for trigger selection.
What temperature range does it support?
The stated operating temperature range is -20°C to 80°C.

Overview

The HC-SR501 is a ready-to-use passive infrared motion detector module. A pyroelectric sensing element sits behind a dome-shaped Fresnel lens, and the board carries the conditioning circuitry needed to turn a change in infrared energy into a clean digital signal. When a warm body moves through the detection area, the module switches its output and holds it for a set period before resetting.

Because the output is a 3.3V TTL high or low signal, the module is straightforward to read with microcontrollers and single-board computers. Two small potentiometers on the board give you control over how far it looks and how long the output stays active, so the same module can suit a quick corridor light or a slower room-presence project.

Key Features

  • Onboard pyroelectric sensor, conditioning circuit and Fresnel dome lens
  • 140° detection angle for wide coverage
  • Delay time adjustable from 5 to 200 seconds
  • Sensitivity adjustment changes detection distance by turning the potentiometer
  • 3.3V TTL high or low level output
  • Jumper on the rear for trigger selection
  • Compact 32 x 24 x 18 mm board weighing about 10 g

Specifications Explained

Detection angle

The 140° figure describes the spread of the sensing field. A wider angle means fewer modules are needed to cover a doorway, hallway or small room, though the lens shape and mounting height still influence the actual usable area.

Delay time

The delay potentiometer sets how long the output remains active after motion is detected, from about 5 seconds at one end to about 200 seconds at the other. Short delays suit event counting and quick triggers; longer delays suit lighting that should not switch off immediately.

Sensitivity

The second potentiometer adjusts detection distance. Turning it one way extends the range to roughly 7 m, while turning it the other way shortens it to about 3 m. Lower sensitivity can help reduce false triggers in busy or warm environments.

Output and temperature range

The module provides a 3.3V TTL high or low level signal. Its stated operating temperature range is -20°C to 80°C, covering typical indoor and sheltered outdoor installations.

Compatibility and Requirements

The HC-SR501 is described as compatible with Arduino, Raspberry Pi, AVR, PIC and 8051 platforms. You will need a suitable power source and a way to connect the module's pins to your board, such as jumper wires. The module ships with a jumper fitted on the back for trigger selection.

Typical Uses

  • Motion-triggered lighting for hallways, cupboards and stairways
  • Simple intruder or presence alerts in DIY alarm projects
  • Interactive exhibits and props that respond to visitors
  • Robot and automation projects needing a movement trigger
  • Energy-saving setups that wake a device when someone approaches

What's in the Box

One HC-SR501 PIR motion sensor module with a jumper fitted at the back for trigger selection.

Quick specs

Item Type
Sensor
Model No. / Name
HC SR501
Output Type
(High/ Low-level Signal) 3.3V TTL output
Operating Temperature (°C)
-20°C ~ 80°C
Detection Angle
140°
Delay Time
5 to 200s (Can be Adjusted, Default
See all specifications