Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 30 x 20 cm blue silicone mat that insulates your bench from soldering irons and hot air tools. It is thin, lightweight and non-slip, so you get a protected, tidy work surface in seconds.

Key Highlights

  • Heat insulation silicone surface for soldering and hot air work
  • Compact 30 x 20 cm footprint suits small benches and repair desks
  • Slim 1.4 mm profile lies flat without raising your work area
  • Non-slip surface helps hold parts and tools in place
  • Lightweight at 94 g and easy to roll or store
  • Waterproof, dustproof silicone wipes clean after use

Ideal For

  • Electronics repair technicians working at a compact bench
  • Hobbyists doing soldering and hot air rework at home
  • Makers and crafters who need a non-slip work surface
  • Jewellery and model makers handling small parts
  • Anyone protecting a desk or tabletop from heat and mess

Buying Tip

Check that the 30 x 20 cm area is large enough for the boards or parts you usually work on before ordering, since this mat is intentionally compact.

Elecvora expert review

Our verdict

A no-frills bench protector that does one job well: it gives small soldering and craft tasks a heat-insulating, non-slip surface. It is thin, light and easy to clean, but it is a compact mat rather than a full-size bench cover.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Heat-insulating silicone suits soldering and hot air work
  • Non-slip surface keeps small parts in place
  • Compact and lightweight for small benches
  • Waterproof and dustproof, easy to wipe clean

Cons

  • Only about 30 x 20 cm, so large projects will overhang
  • Thin 1.4 mm sheet offers no padding or raised edges

Best for

Hobbyists and repairers who need a small, protected, non-slip work zone

Not ideal for

Covering a large workbench or containing spills with raised edges

Specifications

Item TypeWorking Mat
Thickness (mm)1~2mm
Overall Dimension295 x 196 x 1.4
ColorBlue
Weight (g)94
Shipping Weight0.11 kg
Shipping Dimensions31 × 21 × 2 cm

What's in the box

  • 1 x Heat Insulation Silicone Working Mat 30 x 20 cm

Frequently Asked Questions

What is this mat made of?
It is made from high-density silicone in blue, which is chosen for heat insulation and a non-slip surface.
How big is the mat?
The overall dimension is approximately 295 x 196 mm, or about 30 x 20 cm, with a thickness of about 1.4 mm.
Does it need power or batteries?
No. It is a passive silicone mat with no electrical parts and no power requirement.
How do I clean it?
Because the silicone is waterproof and dustproof, you can wipe it with a damp cloth once it has cooled.
What is included in the package?
The package contains one Heat Insulation Silicone Working Mat, 30 x 20 cm.
Can I use it for hot air rework?
Yes, it is intended for soldering and hot air tasks where a heat-insulating, non-slip surface is useful; always let tools cool before storing the mat.

Overview

This Heat Insulation Silicone Working Mat is a simple bench accessory for anyone who solders, uses hot air, or works with small parts. The mat measures approximately 295 x 196 mm (around 30 x 20 cm) and is about 1.4 mm thick, giving you a defined work zone that helps shield the desk or workbench underneath from heat and minor mess. The blue silicone construction is waterproof and dustproof, so it can be wiped down and reused.

At just 94 g, the mat is easy to reposition, roll up or tuck away when the bench is needed for something else. It is not a rigid board; it is a flexible, lightweight sheet intended to sit flat on a suitable surface.

Key Features

  • Heat insulation: silicone is chosen for its ability to resist high temperatures, making the mat suitable for soldering and hot air rework tasks.
  • Non-slip surface: helps keep small parts, tools and workpieces from sliding around.
  • Compact size: a 30 x 20 cm area fits neatly on small desks and repair benches.
  • Slim profile: at roughly 1.4 mm thick, it adds very little height under your work.
  • Easy care: waterproof and dustproof silicone can be wiped clean.

Specifications Explained

Size and thickness

The overall dimension of about 295 x 196 x 1.4 mm gives you a work area large enough for small electronics, jewellery or craft jobs while still fitting on a crowded bench. The 1~2 mm thickness range means the mat is thin and flexible rather than a thick, padded block, so it lies close to the surface you are protecting.

Material and colour

The mat is made from high-density silicone in blue. Silicone is used here for its heat-resistant and non-slip properties, and the solid blue colour makes small screws and components easier to spot.

Weight

At 94 g, the mat is light enough to move with one hand and to store in a drawer or toolbox.

Compatibility and Requirements

This is a passive accessory: it needs no power, batteries or software. It is designed to be placed on a flat, stable desk, workbench or tabletop. No special mounting is required, and no additional parts are needed to use it.

Typical Uses

  • Electronics repair and hobby soldering
  • Hot air rework and heat-related bench tasks
  • Crafting, model making and jewellery work
  • Protecting desks and tabletops from heat and small spills
  • Giving small parts a non-slip resting place during assembly

What's in the Box

1 x Heat Insulation Silicone Working Mat 30 x 20 cm.

Quick specs

Item Type
Working Mat
Thickness (mm)
1~2mm
Overall Dimension
295 x 196 x 1.4
Color
Blue
Weight (g)
94
Shipping Weight
0.11 kg
See all specifications