Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The HF150 is a 150mm carbon fiber frame for 3 inch FPV builds, with 4.0mm arms and 2.0mm plates. Its 20x20mm flight controller pattern and 9x12 motor mounts make it a simple, lightweight base for 13xx and 14xx series motors.

Key Highlights

  • 150mm wheelbase X-type split frame for 3 inch propellers
  • 4.0mm carbon fiber arms with 2.0mm body plates
  • 20x20mm flight controller mounting hole distance
  • Motor mounts sized for 13xx and 14xx series motors
  • Lightweight assembly at approximately 40 grams
  • Simple plate and standoff structure for easy building

Ideal For

  • FPV pilots building a lightweight 3 inch quad
  • DIY builders using 13xx or 14xx series motors
  • Makers who want a simple carbon fiber frame kit
  • Pilots who prefer replaceable split arms
  • Compact builds using 20x20mm flight controllers

Buying Tip

Before ordering, confirm that your motors use a 9x12mm mounting pattern and your flight controller uses 20x20mm holes, since the frame is built around those sizes.

Elecvora expert review

Our verdict

The HF150 is a straightforward carbon fiber frame for small 3 inch builds, with thick arms and a light overall structure. It makes sense for builders who value simple assembly and easy arm replacement over a complex chassis.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 4.0mm arms add stiffness at the motor mounts
  • Lightweight frame at roughly 40 grams
  • Simple X-type split layout is easy to build and repair
  • Clear 20x20mm flight controller and 9x12mm motor patterns

Cons

  • Electronics, motors, propellers and battery are not included
  • Only the listed 20x20mm flight controller pattern is specified
  • No detailed hardware list is provided in the product data

Best for

Small 3 inch FPV and DIY builds using 13xx or 14xx series motors

Not ideal for

Builders needing a larger frame or non-20x20mm flight controller mounting

Specifications

Item TypeFrame
Model No. / NameCarbon Fiber Frame
Thickness (mm)Arm 4.0mm, other plates 2.0mm
Paddle3 inch paddle
Flight Controllerhole distance 20x20mm
Motor Rating13xx, 14xx series (9x12)
StructureX-type split
Shipping Weight0.055 kg
Shipping Dimensions15 × 12 × 1 cm

What's in the box

  • 1 x HF150 150mm 3 inch Carbon Fiber Frame

Frequently Asked Questions

What size propellers does the HF150 frame use?
It is designed for 3 inch propellers, matched to the 150mm wheelbase.
Which motors fit this frame?
The frame supports 13xx and 14xx series motors with a 9x12mm mounting pattern, including examples such as 1306, 1407 and 1105.
What flight controller mounting does it have?
The flight controller hole distance is 20x20mm, so your flight controller must match that pattern.
Is this a complete drone?
No. The package includes the carbon fiber frame only; motors, propellers, flight controller, ESC, camera, VTX and battery are not included.
How thick are the frame parts?
The arms are 4.0mm thick and the other plates are 2.0mm thick.
How much does the frame weigh?
The frame is listed at approximately 40 grams, excluding electronics and motors.

Overview

The HF150 is a compact carbon fiber frame designed around a 150mm wheelbase and 3 inch propellers. It uses an X-type split structure, where a bottom plate, top plate and standoffs form the body while four separate arms carry the motors. This is a familiar layout for small FPV builds because it keeps the electronics protected in the centre and makes individual arm replacement practical.

With 4.0mm arms and 2.0mm plates, the frame targets a practical balance between stiffness and low weight. The complete frame is listed at roughly 40 grams, which suits lightweight 3 inch builds where every gram affects handling.

Key Features

  • X-type split structure: separate arms and stacked plates simplify assembly and repairs.
  • Thick arms: 4.0mm carbon fiber arms provide a rigid base for motor mounting.
  • Compact plates: 2.0mm top and bottom plates keep the body slim and light.
  • 20x20mm flight controller pattern: matches compact flight controllers with that hole spacing.
  • 9x12mm motor mounting: intended for 13xx and 14xx series motors.
  • 3 inch propeller support: sized for 3 inch paddles within the 150mm wheelbase.

Specifications Explained

Wheelbase and propeller size

The 150mm wheelbase is matched to 3 inch propellers. This is a small-format platform, so it suits compact builds rather than larger 5 inch quads. Check that your chosen propellers are 3 inch and that they clear the frame and stack.

Carbon fiber thickness

The arms are 4.0mm thick, while the other plates are 2.0mm. Thicker arms add stiffness at the motor mounts, and thinner plates help keep the overall frame light. The result is a frame that should handle normal 3 inch flying without excess bulk.

Flight controller mounting

The flight controller hole distance is 20x20mm. Your flight controller, and any stack you plan to use, must match this pattern. Confirm the mounting before ordering, since this frame does not list other hole patterns.

Motor rating

Motor mounting follows a 9x12mm pattern and is intended for 13xx and 14xx series motors. The source data also names 1306, 1407 and 1105 motors as supported examples. Match your motor's mounting pattern and size to this rating.

Compatibility and Requirements

This frame is intended for 3 inch propellers, 20x20mm flight controllers and 13xx or 14xx series motors with a 9x12mm mounting pattern. Electronics such as the flight controller, ESC, FPV camera, VTX, receiver, motors, propellers and battery are not included and must be selected separately. Builders should confirm that each component fits the compact 150mm layout before assembly.

Typical Uses

The HF150 suits small FPV builds, lightweight 3 inch quads and DIY projects where a simple carbon frame is preferred. Its split-arm design also makes it a reasonable choice for pilots who expect to replace arms after hard landings.

What's in the Box

  • 1 x HF150 150mm 3 inch Carbon Fiber Frame

No motors, propellers, flight controller, ESC, camera, VTX or battery are included.

Quick specs

Item Type
Frame
Model No. / Name
Carbon Fiber Frame
Thickness (mm)
Arm 4.0mm, other plates 2.0mm
Paddle
3 inch paddle
Flight Controller
hole distance 20x20mm
Motor Rating
13xx, 14xx series (9x12)
See all specifications