Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by HI-LINK, this motion sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Router Module; model no. / name HLK MT7621A; processor Embedded MIPS1004Kc (880 MHz, Dual-Core), 32 KB I-Cache and 32 KB D-Cache per core, 256 KB L2 Cache (shared by Dual-Core).

Key Highlights

  • Item Type: Router Module
  • Model No. / Name: HLK MT7621A
  • Processor: Embedded MIPS1004Kc (880 MHz, Dual-Core), 32 KB I-Cache and 32 KB D-Cache per core, 256 KB L2 Cache (shared by Dual-Core)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeRouter Module
Model No. / NameHLK MT7621A
ProcessorEmbedded MIPS1004Kc (880 MHz, Dual-Core), 32 KB I-Cache and 32 KB D-Cache per core, 256 KB L2 Cache (shared by Dual-Core)
InterfaceOne RGMII/MII interface
Memory Capacity16-bit DDR2/3, up to 256/512 Mbytes
USBUSB3 x 1 + USB2 x 1 or USB2 x 2 (all host)
PCIEPCIe host x 3
I/O pinsI2C, UART Lite x 3, JTAG, MDC, MDIO, GPIO
Audio input/output PortSPDIF-Tx, I2S, PCM
FirmwareLinux 2.6 SDK, OpenWRT
Shipping Weight0.011 kg
Shipping Dimensions9 × 7 × 1 cm

Overview

The Hi-Link HLK-MT7621A Gigabit Gateway Router Module, made by HI-LINK, is listed in our motion sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Router Module
  • Model No. / Name: HLK MT7621A
  • Processor: Embedded MIPS1004Kc (880 MHz, Dual-Core), 32 KB I-Cache and 32 KB D-Cache per core, 256 KB L2 Cache (shared by Dual-Core) (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Interface: One RGMII/MII interface (confirm your cable or board uses the same connector)
  • Memory Capacity: 16-bit DDR2/3, up to 256/512 Mbytes (more memory leaves room for larger programs and buffers)
  • USB: USB3 x 1 + USB2 x 1 or USB2 x 2 (all host)
  • PCIE: PCIe host x 3
  • I/O pins: I2C, UART Lite x 3, JTAG, MDC, MDIO, GPIO

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Hi-Link HLK-7621A module uses the MT7621A chipset. The MT7621A integrates aual-core MIPS-1004Kc(880MHz), HNAT/HQoS/Samba/VPN accelerators, 5-port GbE switch, RGMII, USB3.0, USB2.0, 3xPCIe, SD-XC. The powerful CPU with a rich portfolio is suitable for 802.11ac, LTE cat4/5, edge, hotspot, VPN, and AC (Access Control). It can also connect to a touch panel, ZigBee/Z-Wave for Internet Service Router, and Home Security Gateway. For the next-generation router, MT7621A provides several dedicated hardware engines to accelerate the NAT, QoS, Samba, and VPN traffic. These accelerators relieve the CPU for other upper-layer applications.
Features:
  1. Hardware Features: HW storage accelerator , HW NAT: 2Gbps wired speed, L2 bridge, IPv4/IPv6 routing, NAT, NAPT, DS-Lite, 6RD, 6to4
  2. Quality of Service (QoS): 16 hardware queues for guaranteed min/max bandwidth per flow, Seamless integration with HW NAT engine , 2Gbps wired speed
  3. Hardware Crypto: IPSec throughput: 400~500 Mbps
  4. Green Features: Intelligent Clock Scaling (exclusive), DDR2/3: ODT off, Self-refresh mode
  5. Driver Support: RGMII iNIC Driver: Linux 2.4/2.6

Package Includes:

Hi-Link HLK-MT7621A Gigabit Gateway Router Module

Quick specs

Item Type
Router Module
Model No. / Name
HLK MT7621A
Processor
Embedded MIPS1004Kc (880 MHz, Dual-Core), 32 KB I-Cache and 32 KB D-Cache per core, 256 KB L2 Cache (shared by Dual-Core)
Interface
One RGMII/MII interface
Memory Capacity
16-bit DDR2/3, up to 256/512 Mbytes
USB
USB3 x 1 + USB2 x 1 or USB2 x 2 (all host)
See all specifications