
1 / 4 · Click to enlarge
AI Summary
A 2.4GHz FHSS transmitter and PWM receiver set for RC cars and bots, with 4096-step resolution and roughly 300m range. Both units run on DC 4V-9V and include Bluetooth 5.1 for setup.
Key Highlights
- 2.4GHz FHSS link for stable, interference-resistant control
- Approximately 300m RF range for larger tracks and outdoor runs
- 4096 channel resolution for smooth, precise inputs
- PWM response time of 20ms or less
- Transmitter and receiver both accept DC 4V-9V
- Bluetooth 5.1 dual mode built in for configuration
Ideal For
- RC car and buggy drivers wanting a reliable 2.4GHz set
- Builders of small ground robots and bots
- Hobbyists working with PWM servos and motor controllers
- Outdoor users who need roughly 300m of range
- Makers adding Bluetooth 5.1 setup to a radio link
Buying Tip
Check that your vehicle's servos and motor controller accept standard PWM input and that your packs sit within the DC 4V-9V range before buying.
Elecvora expert review
Our verdict
A practical, well-specced 2.4GHz set for ground vehicles and PWM projects, with fine resolution and good range for the class. It keeps things simple rather than offering aircraft-grade channel counts.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- FHSS 2.4GHz link with roughly 300m range
- 4096-step resolution for smooth inputs
- PWM response of 20ms or less
- Both units run on DC 4V-9V
- Bluetooth 5.1 dual mode included
Cons
- No battery or charger listed in the package
- PWM-only output limits use with serial or SBUS devices
Best for
RC cars, bots and PWM-based builds needing dependable mid-range control
Not ideal for
Pilots needing many channels or telemetry-heavy aircraft setups
Specifications
| Item Type | Transmitter, Receiver |
|---|---|
| Model No. / Name | CT-6A transmitter+F-06A receiver(PWM) |
| RF Range | 2.4Ghz ISM |
| RF Power | ~90MA |
| Modulation Type | FHSS |
| Response Time (mS) | PWM≤20MS |
| RF distance | ~:300M |
| Receiver Sensitivity | -96dbm |
| Additional Specs. | Channel Resolution: 4096 |
| Transmitter Voltage | DC 4V-9V |
| Receiver Voltage | DC 4V-9V |
| Bluetooth Version | Supports Bluetooth 5.1 dual mode function |
| Shipping Weight | 0.456 kg |
| Shipping Dimensions | 25 × 19 × 10 cm |
What's in the box
- 1 x CT-6A transmitter
- 1 x F-06A receiver (PWM)
Frequently Asked Questions
What is included in the package?
What voltage does the system need?
What range can I expect?
What kind of output does the receiver provide?
Does it support Bluetooth?
How precise is the control?
Overview
The HOTRC CT-6A and F-06A form a matched radio control set: a handheld transmitter that sends commands and a receiver that turns them into PWM output for servos, motors and actuators. The system operates on the 2.4GHz ISM band using FHSS modulation, which hops between frequencies to keep the link steady when other radios are nearby. It is aimed at RC cars, bots and general PWM-driven builds where simple, reliable control matters more than dozens of channels.
Key Features
- FHSS 2.4GHz link: frequency hopping supports clear communication in busy radio environments.
- Long reach: rated RF distance of approximately 300m gives room for large tracks and outdoor driving.
- Fine control: 4096-step channel resolution translates small stick movements into precise output.
- Fast PWM output: response time of 20ms or less keeps steering and throttle feeling direct.
- Flexible power: both transmitter and receiver accept DC 4V-9V.
- Bluetooth 5.1 dual mode: built-in wireless connectivity for configuration and setup.
Specifications Explained
RF range and sensitivity: the receiver is rated at -96dBm sensitivity, which means it can pick up weak signals at distance; combined with the roughly 300m range figure, this suits larger outdoor areas.
Resolution and response: 4096 resolution steps give smooth, granular control rather than coarse jumps, and a PWM response of 20ms or less keeps latency low enough for responsive driving.
Power: the DC 4V-9V window on both units covers common RC battery packs, so you can power the set from your existing setup within that range.
RF power: the radio draws around 90mA, a modest figure that suits small onboard power supplies.
Compatibility and Requirements
The F-06A outputs PWM signals, so it pairs with devices that accept standard PWM input, such as servos, motor controllers and actuators. Both units must be powered within DC 4V-9V. Bluetooth 5.1 dual mode is available for setup tasks. No other compatibility details are specified.
Typical Uses
Well suited to RC cars and buggies, small ground robots, and bench or field projects that need a dependable PWM link over moderate distances. The fine resolution helps with precise steering and throttle work, while the range suits outdoor driving areas.
What's in the Box
- 1 x CT-6A transmitter
- 1 x F-06A receiver (PWM)
Quick specs
- Item Type
- Transmitter, Receiver
- Model No. / Name
- CT-6A transmitter+F-06A receiver(PWM)
- RF Range
- 2.4Ghz ISM
- RF Power
- ~90MA
- Modulation Type
- FHSS
- Response Time (mS)
- PWM≤20MS


















