Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 1-8S lithium battery checker that displays each cell and total pack voltage. It sounds a loud dual-speaker alarm when a cell falls to your set threshold.

Key Highlights

  • Checks 1S to 8S LiPo, LiFe, Li-ion and LiMn packs
  • Displays each cell voltage then total pack voltage
  • Adjustable alarm from 2.7 V to 3.8 V per cell
  • Twin piezo speakers for a loud low-voltage warning
  • Simple mode button for setting the threshold
  • Lightweight 14 g design with protective case

Ideal For

  • RC pilots who want a quick pre-flight voltage check
  • FPV builders testing 1S-8S lithium packs
  • Car and boat hobbyists monitoring pack voltage
  • Bench technicians checking cell balance
  • Anyone using LiPo, LiFe, Li-ion or LiMn batteries

Buying Tip

Decide your alarm threshold before flying: a higher per-cell setting gives earlier warning, while a lower setting gives more run time with less safety margin.

Elecvora expert review

Our verdict

The HOTRC BX100 is a straightforward, affordable tool that does one job well: showing cell and pack voltage and warning you when a cell gets low. Its small size and loud dual speakers make it easy to keep in a field bag.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple one-button operation
  • Loud twin-speaker alarm
  • Reads individual cells and total pack voltage
  • Supports four lithium chemistries and 1S-8S packs
  • Very compact and lightweight

Cons

  • Balance cable not included
  • Alarm threshold must be set manually
  • Display steps through cells rather than showing all at once

Best for

RC hobbyists who want a low-cost voltage check and low-voltage warning

Not ideal for

Users who need a charger, balancer or data-logging battery analyzer

Specifications

Item TypeBattery Testing Equipment
Model No. / NameBattery Checker/Tester
CompatibilityLiPo
Additional Specs.Alarm set range (V): 2.7-3.8
Battery Input Voltage (V)1S-8S Battery
Battery TypeLiPO/LiFe/Li-Ion/LiMn
Cell Volt. Display (V)0.5-4.5
Pack Volt. Display (V)3.7-36
Length (mm)25
Width (mm)40
Weight (g)14
Shipping Weight0.018 kg
Shipping Dimensions5 × 4 × 1 cm

What's in the box

  • 1 x Cell Checker with Low Voltage Alarm
  • Protective case

Frequently Asked Questions

What battery types does the BX100 support?
It supports LiPo, LiFe, Li-ion and LiMn batteries from 1S to 8S.
How does the alarm work?
When any cell reaches the voltage you set (between 2.7 V and 3.8 V per cell), the dual piezo speakers sound an alarm.
Can I change the alarm threshold?
Yes. Use the mode button to set the per-cell alarm voltage in 0.1 V increments within the 2.7 V to 3.8 V range.
Is a balance cable included?
No. The tester connects to the balance lead already on your battery; the cable shown in some images is not included.
What is included in the box?
You receive one cell checker with low voltage alarm, supplied with a protective case.
What voltage range can the display show?
It shows individual cell voltages from 0.5 V to 4.5 V and total pack voltage from 3.7 V to 36 V.

Overview

The HOTRC BX100 is a pocket-sized voltage checker and low-voltage alarm for lithium battery packs. Connect it to a balance lead and it steps through each cell, showing the voltage on the built-in LED display, then shows the total pack voltage. If any cell reaches the alarm threshold you have set, twin piezo speakers sound a clear warning. It is a simple way to confirm a pack is healthy before a flight or run, and to avoid draining cells too far.

Key Features

  • 1S-8S compatibility: Works with packs from a single cell up to 8 cells in series.
  • Cell and pack readout: Displays individual cell voltages followed by the total pack voltage.
  • Adjustable alarm: Set the low-voltage trigger between 2.7 V and 3.8 V per cell in 0.1 V increments.
  • Dual speakers: Two piezo alarms provide a loud audible warning.
  • Mode button: One button lets you cycle settings and set the alarm voltage.
  • Compact and light: Measures 40 mm by 25 mm and weighs about 14 g, so it adds little bulk to a field bag.

Specifications Explained

Cell voltage display range (0.5-4.5 V): The checker can show the voltage of each individual cell within this range, covering the normal operating window of lithium cells.

Pack voltage display range (3.7-36 V): The total pack voltage readout covers 1S through 8S packs, so you can see the overall state of charge at a glance.

Alarm set range (2.7-3.8 V): You choose the per-cell voltage that triggers the alarm. A higher setting warns you earlier; a lower setting gives more run time but less margin.

Battery types: The BX100 supports LiPo, LiFe, Li-ion and LiMn chemistries, making it useful across many models and devices.

Compatibility and Requirements

The tester connects to a battery balance plug and accepts 1S to 8S packs. It is intended for LiPo, LiFe, Li-ion and LiMn batteries. The balance cable shown in product images is not included; you use the balance lead already on your battery. The unit may be supplied in white, and the printed model reference may appear as BBX1-8S, but operation is the same.

Typical Uses

Use it at the field to check a pack before flight, on the bench to compare cell balance after a charge, or as an alarm during a run to warn you when voltage drops. It is also handy for checking stored packs and for sorting good cells from weak ones.

What's in the Box

1 x Cell Checker with Low Voltage Alarm, supplied with a protective case.

Quick specs

Item Type
Battery Testing Equipment
Model No. / Name
Battery Checker/Tester
Compatibility
LiPo
Additional Specs.
Alarm set range (V): 2.7-3.8
Battery Input Voltage (V)
1S-8S Battery
Battery Type
LiPO/LiFe/Li-Ion/LiMn
See all specifications