
1 / 4 · Click to enlarge
AI Summary
A 180W DC electronic load and battery tester with a 2.4 inch display, 2 to 200V test range and four discharge modes. Bluetooth and wired app support make it easy to log and monitor lithium battery discharge tests.
Key Highlights
- 180W DC electronic load with a 2.4 inch onboard display
- Test voltage range of 2 to 200V for varied battery packs
- Working current range of 0.2 to 20A across tests
- Four discharge modes: constant current, power, resistance and voltage
- Bluetooth wireless and wired connection to Android, iOS and PC apps
- External NTC probe for internal and external temperature measurement
Ideal For
- Battery builders testing lithium packs before installation
- Repair technicians checking pack health and capacity
- RC and drone hobbyists comparing battery performance
- Electronics bench users needing a controllable DC load
- Makers documenting discharge curves with app logging
Buying Tip
Confirm your battery pack's voltage falls within the 2 to 200V test range and that your intended discharge current stays at or below 20A before ordering.
Elecvora expert review
Our verdict
The ATORCH-DL24P packs a wide 2 to 200V test range and four discharge modes into a compact bench unit with app monitoring. It is a practical choice for anyone who needs repeatable discharge data rather than a quick voltage check.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 2 to 200V test voltage range
- Four discharge modes for flexible testing
- Bluetooth and wired app support for Android, iOS and PC
- External NTC probe for dual temperature measurement
- Temperature-controlled fan keeps noise down
Cons
- Load ceiling of 180W limits testing of high-power packs
- Requires a separate 12V DC supply, though one is included
- No battery is included, so you must supply your own pack
Best for
Hobbyists and technicians discharge-testing lithium battery packs
Not ideal for
Users wanting a simple plug-and-read voltage checker with no setup
Specifications
| Compatibility | Lithium Battery |
|---|---|
| Power Supply Voltage (V) | 12V DC |
| Working Current (mA) | 0.2~20A |
| Additional Specs. | Condition of fan rotation: when the temperature is greater than 10W or the temperature is higher than 45° |
| Test voltage | 2~200V |
| Shipping Weight | 0.813 kg |
| Shipping Dimensions | 20 × 20 × 13 cm |
What's in the box
- 1 x DL24P load tester
- 1 x DC12V 1A power supply
- 1 x PC computer online cable
- 1 x temperature probe
- 1 x red and black single line crocodile clip lead
- 1 x US to EU adapter
Frequently Asked Questions
What voltage range can this tester handle?
How much current can it draw?
Can I monitor tests on my phone or computer?
What discharge modes are available?
Does the fan run all the time?
What comes in the box?
Overview
The ATORCH-DL24P is a DC electronic load and battery tester intended for controlled discharge testing of lithium battery packs. It combines a 2.4 inch display with a 180W load capability and a test voltage range of 2 to 200V, so you can watch voltage, current and related parameters change as a pack discharges. The unit accepts a 12V DC power supply and works across a 0.2 to 20A current range.
Rather than relying on a simple voltage reading, the DL24P lets you apply a defined load and observe how the battery behaves under it. That makes it useful for checking whether a pack holds up under realistic current draw, comparing cells or packs, and spotting packs that sag early.
Key Features
- Four discharge modes: constant current, constant power, constant resistance and constant voltage are all supported, so you can match the test to the way the battery is actually used.
- Bluetooth and wired connectivity: the tester can connect wirelessly or by cable to Android, iOS and PC applications for online monitoring.
- Dual temperature measurement: an external wired NTC probe allows internal and external temperature readings during a test.
- Temperature-controlled fan: the fan activates when the load exceeds roughly 10W or the temperature rises above about 45 degrees, and its speed is regulated to reduce noise and wear.
- On-screen discharge data: the 2.4 inch display presents multiple parameters on a single discharge and aging screen.
Specifications Explained
180W load: this is the discharge power the unit is built to handle. Higher-wattage packs will need the load set within this ceiling to stay inside safe operating limits.
2 to 200V test voltage: the wide range covers small single-cell measurements up to higher-voltage packs. Check that your pack's voltage falls inside this window before connecting.
0.2 to 20A working current: this defines the current range you can draw during a test, giving enough headroom for many hobby and bench applications.
12V DC supply: the tester is powered from a 12V DC input, and a matching power supply is included.
Compatibility and Requirements
The DL24P is listed as compatible with lithium batteries and connects to Android, iOS and PC applications. You will need a suitable 12V DC power source, which is supplied in the box, and a battery or pack whose voltage sits within the 2 to 200V test range. Connection to a phone or computer can be made over Bluetooth or with the included wired cable.
Typical Uses
Use it to discharge-test lithium packs and compare capacity between packs, to monitor how voltage holds under a constant current or constant power load, and to check temperature behaviour with the external probe. It is also handy for bench work where you want a controllable DC load rather than a fixed resistor.
What's in the Box
- 1 x DL24P load tester
- 1 x DC12V 1A power supply
- 1 x PC computer online cable
- 1 x temperature probe
- 1 x red and black single line crocodile clip lead
- 1 x US to EU adapter
Quick specs
- Compatibility
- Lithium Battery
- Power Supply Voltage (V)
- 12V DC
- Working Current (mA)
- 0.2~20A
- Additional Specs.
- Condition of fan rotation: when the temperature is greater than 10W or the temperature is higher than 45°
- Test voltage
- 2~200V
- Shipping Weight
- 0.813 kg












