Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A small 4S lithium battery capacity indicator that uses four green LEDs to show pack level from 25 to 100 percent. It fits 12 to 16.8V packs and draws only 2 to 3 mA, making quick charge checks simple.

Key Highlights

  • Four green LEDs indicate 25, 50, 75 and 100 percent capacity levels
  • Rated for 4S lithium packs from 12 to 16.8V
  • Low 2 to 3 mA current draw has minimal effect on the pack
  • Compact 44 x 9 mm board weighs about 8 g
  • Simple LED readout for fast checks without a multimeter
  • Works as a small level monitor for 4S 18650 battery builds

Ideal For

  • RC and FPV hobbyists using 4S lithium packs
  • Makers building 4S 18650 battery packs
  • Bench technicians who want a quick level check
  • Portable power and project-box builders
  • Hobbyists adding a simple LED indicator to a battery device

Buying Tip

Confirm your pack is a 4S lithium configuration within 12 to 16.8V before ordering, and plan how you will wire the module to the pack.

Elecvora expert review

Our verdict

A practical little module for anyone who wants a fast visual level check on a 4S lithium pack without carrying a meter. It is simple, compact and low-draw, though the readout is an approximate guide rather than a precision measurement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four clear green LED level stages
  • Very low 2 to 3 mA current draw
  • Compact 44 x 9 mm, 8 g board
  • Simple at-a-glance battery monitoring

Cons

  • Limited to 4S lithium packs in the stated voltage range
  • Requires wiring or soldering to the pack
  • LED levels are approximate, not precision measurements

Best for

Hobbyists and builders who want a simple LED level indicator on a 4S lithium pack

Not ideal for

Users needing precise voltage measurement or support for other cell counts

Specifications

Item TypeBattery Testing Equipment
Model No. / NameBattery Level Indicator/Monitor
Voltage Rating (V)12 to 16.8
CompatibilityLithium Battery
Current consumption2~3 mA
Additional Specs.U≈6.6V, 25% LED Indicator U≈7V 50% LED Indicator U≈7.5V 75% LED Indicator U≈8V 100% LED Indicator
Length (mm)44
Width (mm)9
Weight (g)8
Shipping Weight0.01 kg
Shipping Dimensions5 × 1 × 1 cm

What's in the box

  • 1 x 4S 18650 Lithium Battery Capacity Indicator Module Level Tester LED

Frequently Asked Questions

What battery type does this indicator work with?
It is intended for 4S lithium battery packs rated from 12 to 16.8V. It is not listed for other cell counts or chemistries.
How does the LED readout work?
Four green LEDs represent 25, 50, 75 and 100 percent capacity levels. The specification lists approximate threshold voltages of 6.6V, 7V, 7.5V and 8V.
Will it drain my battery?
Current consumption is only 2 to 3 mA, so the effect on the pack is minimal. Even so, it is good practice to disconnect the pack when not in use.
Does it come with wires or connectors?
The product data lists only the indicator module itself. No connectors, cables or mounting hardware are stated as included.
Can I use it with a 3S or 2S pack?
This version is specified for 4S packs. Other cell-count variants are available separately if you need a different configuration.
How big is the module?
The board measures 44 mm long and 9 mm wide and weighs around 8 g, so it fits into small builds and enclosures.

Overview

This 4S lithium battery capacity indicator is a small LED display board designed to give a fast, visual read on the charge state of a 4S 18650 pack. Instead of connecting a multimeter every time you want a rough level check, you can wire this module to the pack and read the result from four green LEDs. It is a straightforward piece of battery testing equipment for hobbyists and builders who work with 12 to 16.8V lithium packs.

The board is compact at 44 mm long and 9 mm wide, and it weighs around 8 g, so it fits neatly into small enclosures, project boxes and battery-powered builds where space is limited.

Key Features

  • Four-level LED readout: separate green LEDs represent 25, 50, 75 and 100 percent capacity.
  • 4S voltage range: rated for 12 to 16.8V lithium battery packs.
  • Low consumption: the module draws only 2 to 3 mA, so it has minimal impact on the pack.
  • Small footprint: 44 x 9 mm board with an approximate weight of 8 g.
  • Simple monitoring: a practical level indicator for 4S 18650 battery setups.

Specifications Explained

The 12 to 16.8V rating matches the typical operating range of a 4S lithium pack, so the indicator is intended for that configuration rather than for 1S, 2S or 3S packs. The LED thresholds are given as approximately 6.6V, 7V, 7.5V and 8V in the supplied specification, while the LED stages are described as 25, 50, 75 and 100 percent. Because these figures come directly from the product data, treat the readout as an approximate level guide rather than a precision instrument.

Current consumption of 2 to 3 mA is very low, which means the module can stay connected without noticeably draining the pack. The 44 x 9 mm size and 8 g weight make it easy to mount in compact builds.

Compatibility and Requirements

This module is intended for lithium batteries in a 4S configuration within the 12 to 16.8V range. It is not listed as compatible with other chemistries or cell counts. You will need to connect it to the battery pack yourself, so basic wiring or soldering ability is useful. No connectors, cables or mounting hardware are stated as included.

Typical Uses

Use it as a level monitor in 4S 18650 battery packs, RC and FPV builds, portable power projects, and bench setups where a quick visual charge check is handy. It also suits hobbyists who want a simple indicator on a battery-powered device without adding a full meter.

What's in the Box

One 4S 18650 lithium battery capacity indicator module level tester LED is included. Other cell-count variants are available separately.

Quick specs

Item Type
Battery Testing Equipment
Model No. / Name
Battery Level Indicator/Monitor
Voltage Rating (V)
12 to 16.8
Compatibility
Lithium Battery
Current consumption
2~3 mA
Additional Specs.
U≈6.6V, 25% LED Indicator U≈7V 50% LED Indicator U≈7.5V 75% LED Indicator U≈8V 100% LED Indicator
See all specifications