Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This vibration/tilt sensor and modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Tilt Sensor; model no. / name HS S21P; operating voltage (vdc) 3.3-5.5. Check that your power source supplies 3.3-5.5 before connecting it.

Key Highlights

  • Item Type: Tilt Sensor
  • Model No. / Name: HS S21P
  • Operating Voltage (VDC): 3.3-5.5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeTilt Sensor
Model No. / NameHS S21P
Operating Voltage (VDC)3.3-5.5
Interface TypePH2.0 3P Terminal Wire
Length (mm)30
Width (mm)18
Weight (g)03
Shipping Weight0.01 kg
Shipping Dimensions9 × 9 × 2 cm

Overview

The HS-S21P, Tilt sensor is listed in our vibration/tilt sensor and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Tilt Sensor
  • Model No. / Name: HS S21P
  • Operating Voltage (VDC): 3.3-5.5 (match this to your power supply; too high a voltage can damage the part)
  • Interface Type: PH2.0 3P Terminal Wire (confirm your cable or board uses the same connector)
  • Length (mm): 30 (measure your mounting space before ordering)
  • Width (mm): 18 (measure your mounting space before ordering)
  • Weight (g): 03 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The module operates within a voltage range of 3.3V to 5.5V, making it compatible with a variety of microcontrollers and power sources. It uses a PH2.0 3-pin terminal wire for its interface, ensuring secure and easy connections. The module's compact size of 30mm × 18mm × 8mm allows it to fit into tight spaces. For mounting, it features 3.2mm diameter holes with a 10mm spacing. The interface consists of three pins: G, connected to the negative pole of the power supply (ground); V, connected to the positive pole; and S, which functions as the digital signal output.


Features:

  1. Operating voltage: 3.3V–5.5V
  2. PH2.0 3-pin terminal for easy connection
  3. Compact size: 30×18×8mm
  4. 3.2mm mounting holes with 10mm spacing
  5. Simple G/V/S pin interface with digital signal output

Package Includes:

1 x HS-S21P, Tilt sensor

Quick specs

Item Type
Tilt Sensor
Model No. / Name
HS S21P
Operating Voltage (VDC)
3.3-5.5
Interface Type
PH2.0 3P Terminal Wire
Length (mm)
30
Width (mm)
18
See all specifications