Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This ecg emg and heart rate sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Touch Button; model no. / name HS-S43P; operating voltage (vdc) 3.3V/5V. Check that your power source supplies 3.3V/5V before connecting it.

Key Highlights

  • Item Type: Touch Button
  • Model No. / Name: HS-S43P
  • Operating Voltage (VDC): 3.3V/5V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeTouch Button
Model No. / NameHS-S43P
Operating Voltage (VDC)3.3V/5V
InterfacePH2.0
Length (mm)31
Width (mm)18
Weight (g)03
Shipping Weight0.01 kg
Shipping Dimensions9 × 9 × 2 cm

Overview

The HS-S43P, Touch Button is listed in our ecg emg and heart rate sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Touch Button
  • Model No. / Name: HS-S43P
  • Operating Voltage (VDC): 3.3V/5V (match this to your power supply; too high a voltage can damage the part)
  • Interface: PH2.0 (confirm your cable or board uses the same connector)
  • Length (mm): 31 (measure your mounting space before ordering)
  • Width (mm): 18 (measure your mounting space before ordering)
  • Weight (g): 03 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TheHS-S43P, Touch Button sensor is a touch switch module based on the principle of capacitive sensing. The human body or metal touching the gold-plated contact surface of the sensor will be sensed. In addition to direct touch with the metal surface, contact with a certain thickness of plastic, glass and other materials can also be sensed. The sensitivity of the induction varies with the size of the contact surface and the thickness of the covering material. The module has two output modes, which can be switched by changing the welding jumper.

There will be a short-circuit point on the module for changing the mode. Solder the two short-circuit points above, and the module mode will switch to switch mode. At this time, it can be used to make a desk lamp with less complicated touch control. Short-circuit the two short-circuit points below, and the module mode will switch to button mode. At this time, it can be used to replace the physical button. Note: When using, the module needs to be at a certain height from the fixed surface to avoid signal errors caused by contact. Do not hold the touch sensor directly, which will cause the back capacitor to heat up to avoid burns.


Features:

  1. Capacitive sensing technology for high responsiveness
  2. Gold-plated contact surface for reliable touch detection
  3. Mode switch via solderable jumper (switch or button)
  4. Detects touch even through non-metallic covers
  5. Compact and easy to integrate into projects
  6. Ideal for replacing mechanical buttons or touch-controlled devices

Package Includes:

1 x HS-S43P, Touch Button

Quick specs

Item Type
Touch Button
Model No. / Name
HS-S43P
Operating Voltage (VDC)
3.3V/5V
Interface
PH2.0
Length (mm)
31
Width (mm)
18
See all specifications