Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Temperature and Humidity Sensor; power supply voltage (v) 1.5 ~ 3.6. Check that your power source supplies 1.5 ~ 3.6 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: Temperature and Humidity Sensor
  • Power Supply Voltage (V): 1.5 ~ 3.6

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameTemperature and Humidity Sensor
Power Supply Voltage (V)1.5 ~ 3.6
Humidity Range0 - 100%RH
Humidity precisionHTU21DA ±2%RH (10%RH to 95%RH)
Power Consumption (W)2.7µW
Communication ModeI2C
Measurement time, max.50 msec
Drift-0.5%RH/year
Response Time(s)5 sec
Length (mm)16
Width (mm)16
Weight (g)5
Shipping Weight0.01 kg
Shipping Dimensions4 × 3 × 1 cm

Overview

The HTU21D Temperature & Humidity Sensor Module is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Temperature and Humidity Sensor
  • Power Supply Voltage (V): 1.5 ~ 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Humidity Range: 0 - 100%RH (quoted range is usually line-of-sight; walls and interference shorten it)
  • Humidity precision: HTU21DA ±2%RH (10%RH to 95%RH)
  • Power Consumption (W): 2.7µW
  • Communication Mode: I2C
  • Measurement time, max.: 50 msec

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

HTU21D Temperature & Humidity Sensor is a premium quality Humidity & Temperature Sensor. You can buy this Sensor from Elecvora. in at a reasonable price. The HTU21D Temperature and Humidity Sensor Module is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for weather stations or humidor control systems. All you need is two lines for I2C communication and you’ll have relative humidity readings and very accurate temperature readings as a bonus. The measured time of this sensor is up to 50 msec There are only four pins that need to be hooked up in order to start using this sensor in a project. One for VCC, one for GND, and two data lines for I2C communication. This breakout board has built-in 4.7k pull-up resistors for I2C communications. If you’re hooking up multiple I2C devices on the same bus, you may want to disable these resistors. Note: Full drops of water can damage the sensor. We recommend wrapping the board in Teflon/irrigation tape for extreme conditions where water droplets may find their way into the sensor. Note : HW-520 & HW-220 on module doesn't affect the working of product .

Package Includes:

1 x HTU21D Temperature and Humidity Sensor Module.

1 x Set of Header. (Unsoldered)

Quick specs

Item Type
Sensor
Model No. / Name
Temperature and Humidity Sensor
Power Supply Voltage (V)
1.5 ~ 3.6
Humidity Range
0 - 100%RH
Humidity precision
HTU21DA ±2%RH (10%RH to 95%RH)
Power Consumption (W)
2.7µW
See all specifications