
1 / 4 · Click to enlarge
AI Summary
A compact AC/DC balance charger and discharger for 1-6 cell lithium packs, 1-15 cell NiMH/NiCd and 2-20V Pb batteries. Its built-in AC supply means you can charge from a wall outlet or an 11-18VDC field source without a separate power brick.
Key Highlights
- Built-in AC supply accepts 100-240VAC, plus 11-18VDC input for field use
- Balances individual cells on lithium packs from 1 to 6 cells
- Adjustable charge current from 0.1 to 5A with 80W charging power
- Stores up to five battery profiles in internal memory
- Internal resistance checker and input voltage monitoring built in
- Includes T-plug, alligator clip, Futaba and JST charging cables
Ideal For
- RC car and truck owners charging 2S and 3S LiPo packs at the bench
- FPV pilots who want a compact field charger for 4S and 6S packs
- Airplane and helicopter hobbyists cycling NiMH and NiCd receiver packs
- Robot and DIY builders maintaining mixed battery chemistries
- Beginners who want one charger that runs from mains or a car battery
Buying Tip
Confirm your packs use a JST-XH balance plug and that your expected charge rate fits within 80W before ordering, since a JST-XH connector is not included.
Elecvora expert review
Our verdict
A practical all-in-one charger for hobbyists who want mains and field power in one small box. It covers the common chemistries and cell counts well, though the 80W ceiling and 1A discharge limit keep it modest for large packs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Built-in AC supply removes the need for a separate power brick
- Handles lithium, nickel and lead chemistries in one unit
- Five-profile memory and internal resistance checker are genuinely useful
- Fused charging cables and a full set of connector leads included
Cons
- 80W charging power limits fast charging of larger high-voltage packs
- Discharge is capped at 1.0A and 10W
- This is a copy charger, so features may differ from the original
Best for
Hobbyists charging small to mid-size packs at home or from a car battery
Not ideal for
Pilots needing very high-wattage parallel charging of large packs
Specifications
| Charge Current Range (A) | 0.1 to 5 |
|---|---|
| Dischage Current Range (A) | 0.1 to 1.0 |
| No. of Cells | 1 to 6 |
| Input Voltage (VDC) | 11 ~ 18 |
| Drain Current (Id) (A) | 300 |
| NiCd/NiMH cell count | 1 ~ 15 Cells |
| Pb battery voltage | 2 ~ 20 |
| Charging Power (W) | 80 |
| Discharging Power (W) | 10 |
| Dimensions (L x W x H) mm | 133 x 87 x 33 |
| Weight (g) | 624 |
| Shipping Weight | 0.7 kg |
| Shipping Dimensions | 15 × 10 × 4 cm |
What's in the box
- 1 x IMAX B6AC dual power battery charger
- 1 x 100-250V power supply cord
- 1 x T-plug to banana connector charging cable
- 1 x DC cable with alligator clip connector
- 1 x T-plug to alligator clip charging cable
- 1 x T-plug to Futaba charging cable
- 1 x T-plug to JST charging cable
- 1 x English manual
Frequently Asked Questions
Which battery chemistries can this charger handle?
Can I power it from a car battery?
What charge current can I set?
Does it include a balance connector for my pack?
What comes in the box?
Is this a genuine iMAX charger?
Overview
The IMAX B6AC is a bench charger and discharger for hobby battery packs. It combines a microprocessor-controlled charging circuit with a built-in AC adapter, so a single compact unit can run from a wall socket at 100-240VAC or from an 11-18VDC source such as a car battery at the field. With 80W of charging power and an adjustable current range of 0.1 to 5A, it suits small receiver packs through to larger flight and car packs within that power budget.
Key Features
- Charges and discharges lithium, nickel and lead-based chemistries
- Individual cell balancing for lithium packs up to 6 cells
- Input voltage monitoring helps protect a car battery used as a field supply
- Battery break-in and cyclic charge/discharge routines
- Memory for up to five battery profiles
- Internal resistance checker for judging pack health
- Delta-peak sensitivity for nickel chemistry charging
Specifications Explained
Charge current 0.1-5A: you set the rate yourself, so a small 2S receiver pack can be charged gently while a larger pack can use the full 5A where the power limit allows. 80W charging power is the ceiling that determines how quickly higher-voltage packs can be charged. Discharge current 0.1-1.0A with 10W discharging power is intended for storage discharging and cycle testing rather than fast cycling.
Cell counts: lithium packs from 1 to 6 cells, NiCd and NiMH from 1 to 15 cells, and Pb batteries from 2 to 20V. The unit measures 133 x 87 x 33mm and weighs 624g, so it takes little bench space.
Compatibility and Requirements
The balance port is a JST-XH type, which suits packs wired with that connector, including Zippy, HXT and TURNIGY packs and any pack used with a JST adapter. A JST-XH connector is not included in the package. Charging cables are supplied with T-plug, alligator clip, Futaba and JST ends, and the cables come with a fitted fuse. Power can come from the included 100-250VAC cord or from an 11-18VDC supply you provide.
Typical Uses
Bench charging at home for RC cars, boats and aircraft packs; field charging from a car battery with input monitoring watching the supply; storage discharging packs after a session; cycling nickel packs to revive capacity; and checking internal resistance to decide when a pack is past its best.
What's in the Box
- 1 x IMAX B6AC dual power battery charger
- 1 x 100-250V power supply cord
- 1 x T-plug to banana connector charging cable
- 1 x DC cable with alligator clip connector
- 1 x T-plug to alligator clip charging cable
- 1 x T-plug to Futaba charging cable
- 1 x T-plug to JST charging cable
- 1 x English manual
Note that this is a copy charger rather than a genuine iMAX unit, and some features may differ from the original. Check the manual before your first charge.
Quick specs
- Charge Current Range (A)
- 0.1 to 5
- Dischage Current Range (A)
- 0.1 to 1.0
- No. of Cells
- 1 to 6
- Input Voltage (VDC)
- 11 ~ 18
- Drain Current (Id) (A)
- 300
- NiCd/NiMH cell count
- 1 ~ 15 Cells














