
1 / 4 · Click to enlarge
AI Summary
A complete 5-pin JST-VH male and female connector pair on a 3.96mm pitch, supplied with housing for secure wire-to-wire or wire-to-board links. Nickel-plated phosphor bronze contacts handle 250 VDC and 3 to 10 A, suiting battery packs and RC servo leads.
Key Highlights
- 5-pin JST-VH male and female pair with housing included
- 3.96mm pitch spacing for compact, polarised connections
- Nickel-plated phosphor bronze contacts for stable conductivity
- Rated 250 VDC with 3 to 10 A current handling
- Accepts 22 to 30 AWG wire for hobby and repair work
- UL94V-0 housing rated for -25 to 85 °C operation
Ideal For
- RC hobbyists wiring servo and battery leads
- Makers building battery packs and balancer harnesses
- Electronics repair technicians replacing damaged connectors
- Bench prototypers needing a polarised 5-pin power link
Buying Tip
Check your existing connector's pitch and pin count before ordering, since a 3.96mm JST-VH will not mate with 2.54mm or 2.5mm JST families.
Elecvora expert review
Our verdict
A straightforward, well-specified connector pair for small power runs where you want a polarised, serviceable joint instead of a permanent solder connection. The nickel-plated phosphor bronze contacts and UL94V-0 housing are sensible choices for hobby and repair work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete male and female pair with housing in one pack
- Handles 250 VDC and 3 to 10 A for small power circuits
- Wide 22 to 30 AWG wire acceptance
- Flame-retardant housing rated -25 to 85 °C
Cons
- No crimp tool or wire included
- Single pair per pack, so multi-connection builds need several packs
- Not compatible with narrower-pitch JST families
Best for
RC, battery pack and repair projects needing a 5-pin polarised power connector
Not ideal for
High-current main power feeds or signal-only fine-pitch boards
Specifications
| Manufacturer | Generic |
|---|---|
| Pitch Spacing (mm) | 3.96 |
| Gender | Male-Female |
| Operating Voltage (VDC) | 250 |
| Current Handle Capacity (A) | 3 to 10 |
| No. of Pins | 5 |
| Connector Type | JST VH |
| Contact Material | Phosphor Bronze |
| Contact Plating | Nickel |
| Metal Connector Size (mm) | 7.5 |
| Operating Temperature (°C) | -25 to 85 |
| Flammability Rating | UL94V-0 |
| Color | White |
| Length (mm) | 20 |
| Width (mm) | 8 |
| Weight (g) | 1 (approx) (each) |
| Allowed Wire Size (AWG) | 22 to 30 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 5-pin JST-VH male connector
- 1 x 5-pin JST-VH female connector
- Housing
Frequently Asked Questions
What is the pitch of this connector?
How much current can it handle?
What wire sizes fit?
What is included in the pack?
What is the voltage and temperature rating?
Do I need special tools?
Overview
The JST-VH 5-pin connector is a compact, polarised interconnect built around a 3.96mm pitch. This pack supplies one complete male and female pair together with the housing, so you have the mating halves needed to terminate a cable or join a wire run without hunting for separate parts. The white housing is moulded from material rated UL94V-0, and the contacts are phosphor bronze with a nickel plating that supports consistent electrical contact over repeated mating cycles.
With a 250 VDC rating and a current capacity of 3 to 10 A, this connector sits in the small-power bracket rather than signal-only territory. That makes it a practical choice where a bare solder joint would be fragile or where you want a connector that can be unplugged for service.
Key Features
- Complete pair: male and female connector halves plus housing in one pack.
- 3.96mm pitch: wider spacing than 2.54mm headers, giving more room between pins.
- Nickel-plated phosphor bronze contacts: chosen for conductivity and wear resistance.
- 250 VDC, 3 to 10 A rating: suited to low-voltage power distribution and small loads.
- 22 to 30 AWG wire range: covers typical hobby hook-up and equipment wiring.
- UL94V-0 housing: flame-retardant plastic, rated for -25 to 85 °C.
Specifications Explained
Pitch (3.96mm) is the centre-to-centre distance between adjacent pins. A wider pitch than common 2.54mm headers means the pins are easier to access with a soldering iron and less prone to accidental bridging, though the connector occupies slightly more board or bundle space.
Current capacity (3 to 10 A) depends on the wire gauge and how many pins carry the load. Using thicker wire within the 22 to 30 AWG range and spreading current across multiple pins keeps you closer to the upper end of that window.
Voltage (250 VDC) is the rated working voltage, comfortably above the low-voltage battery and servo circuits this connector is normally used with. Temperature (-25 to 85 °C) covers indoor and most outdoor hobby environments.
Contact plating (nickel) provides a hard, corrosion-resistant surface. The metal connector body measures approximately 7.5mm, and the assembled connector is around 20mm long and 8mm wide, weighing roughly 1g.
Compatibility and Requirements
This is a JST-VH type connector on a 3.96mm pitch. It accepts wire in the 22 to 30 AWG range, so you will need wire within that window plus the usual crimping or soldering tools to terminate the contacts. The pack contains one male and female pair with housing; additional pairs are needed for multi-connection projects. No crimp tool, wire or mating board header is included.
Typical Uses
- Rechargeable battery pack wiring and battery balancer leads
- Radio-controlled servo connections
- Bench prototyping and equipment repairs
- Low-voltage power distribution inside small enclosures
What's in the Box
One 5-pin JST-VH connector set: male and female connector halves with housing.

Quick specs
- Manufacturer
- Generic
- Pitch Spacing (mm)
- 3.96
- Gender
- Male-Female
- Operating Voltage (VDC)
- 250
- Current Handle Capacity (A)
- 3 to 10
- No. of Pins
- 5



















