Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 6-pin JST VH connector pair with housing at 3.96mm pitch, rated 250 VDC and 3 to 10 A. The keyed latch and nickel-plated phosphor bronze contacts keep moderate-current wiring secure.

Key Highlights

  • 6-pin JST VH male and female connector pair with housing
  • 3.96mm pitch spacing for reliable, keyed mating
  • Rated 250 VDC with 3 to 10 A current capacity
  • Nickel-plated phosphor bronze contacts for stable conductivity
  • Accepts 22 to 30 AWG wire for flexible build options
  • UL94V-0 white housing rated -25 to 85 degrees Celsius

Ideal For

  • RC hobbyists wiring servo and battery leads
  • Drone builders assembling power distribution harnesses
  • Battery pack assemblers needing balanced multi-cell taps
  • Makers building pluggable low-voltage I/O links
  • Repair technicians replacing worn 3.96mm pitch connectors

Buying Tip

Check that your board or device uses a 3.96mm pitch VH-style header, and match your crimp tool to the 22 to 30 AWG wire you plan to use.

Elecvora expert review

Our verdict

A tidy, well-specified connector pair for moderate-current wiring where a keyed latch matters. The 3.96mm pitch and 3 to 10 A range cover most battery and servo jobs without bulk.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Keyed housing reduces mis-mating risk
  • Nickel-plated phosphor bronze contacts
  • Wide 22 to 30 AWG wire acceptance
  • UL94V-0 housing with -25 to 85 C range

Cons

  • Requires a crimp tool and terminals for assembly
  • Only mates with matching JST VH 6-pin parts

Best for

RC, drone and battery harness wiring up to 10 A

Not ideal for

High-current main power leads or fine-pitch signal boards

Specifications

ManufacturerGeneric
Pitch Spacing (mm)3.96
GenderMale-Female
Operating Voltage (VDC)250
Current Handle Capacity (A)3 to 10
No. of Pins6
Connector TypeJST VH
Contact MaterialPhosphor Bronze
Contact PlatingNickel
Metal Connector Size (mm)7.5
Operating Temperature (°C)-25 to 85
Flammability RatingUL94V-0
Allowed Wire Size (AWG)22 to 30
ColorWhite
Length (mm)24
Width (mm)8
Weight (g)1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 6-pin JST VH male connector with housing
  • 1 x 6-pin JST VH female connector with housing

Frequently Asked Questions

What wire size does this connector accept?
The terminals accept 22 to 30 AWG wire. Use heavier gauge within that range if you plan to run near the 10 A upper limit.
What is the voltage and current rating?
The connector is rated for 250 VDC and a current capacity of 3 to 10 A, depending on wire gauge and crimp quality.
Does it come with both male and female halves?
Yes, the set includes one male and one female 6-pin connector with housing.
Can I mate it with other 3.96mm connectors?
Only with a matching JST VH 6-pin counterpart. The keying and pitch are specific to this series.
What temperature range can it handle?
It is rated for operation from -25 to 85 degrees Celsius.
How do I attach wires to it?
Crimp the nickel-plated terminals onto stripped wire, then insert them into the housing until they click into place.

Overview

The JST VH 6-pin connector set gives you a matched male and female housing at a 3.96mm pitch, built for wiring runs that need a firm, keyed connection rather than a friction-fit header. The white housing carries a UL94V-0 flammability rating, and the nickel-plated phosphor bronze contacts are sized for 22 to 30 AWG wire. With a 250 VDC rating and a 3 to 10 A current range, it sits in the useful middle ground between small signal connectors and bulky power terminals.

Key Features

  • Keyed 6-pin layout: the 3.96mm pitch and polarised housing help prevent mis-mating during assembly.
  • Moderate power handling: rated 250 VDC and 3 to 10 A, suitable for battery and servo wiring.
  • Durable contacts: phosphor bronze base with nickel plating for consistent contact resistance.
  • Broad wire range: crimp terminals accept 22 to 30 AWG conductors.
  • Compact footprint: about 24mm long, 8mm wide and 1 gram per connector.
  • Temperature tolerant: rated for operation from -25 to 85 degrees Celsius.

Specifications Explained

Pitch is the centre-to-centre distance between adjacent pins. At 3.96mm, this connector is wider than the 2.54mm headers common on breadboards, which gives each contact more room and supports higher current. Current capacity of 3 to 10 A depends on the wire gauge and crimp quality you use, so choose the heavier end of the 22 to 30 AWG range when running closer to the upper limit. Voltage is rated at 250 VDC, well above typical hobby and low-voltage industrial supplies. The 7.5mm metal connector size and 24 by 8mm housing dimensions help you plan clearance inside enclosures. Each unit weighs roughly 1 gram, so harness weight stays negligible.

Compatibility and Requirements

This set is designed for 22 to 30 AWG stranded or solid wire and requires crimping of the terminals before insertion into the housing. Mating is only with the corresponding JST VH 6-pin counterpart, since the pitch and keying are specific to this series. Confirm your device uses a 3.96mm pitch VH-style header before ordering.

Typical Uses

Common applications include rechargeable battery pack leads, radio-controlled servo connections, battery balancer wiring and other pluggable I/O links where a compact, latch-secured joint is preferred. The 6-pin count suits balanced multi-cell battery taps and multi-wire servo or sensor runs.

What's in the Box

One 6-pin JST VH connector pair consisting of a male and female connector with housing.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
3.96
Gender
Male-Female
Operating Voltage (VDC)
250
Current Handle Capacity (A)
3 to 10
No. of Pins
6
See all specifications