
1 / 5 · Click to enlarge
AI Summary
A 75KV heavy-lift propulsion system with an integrated ESC and aluminum mount, delivering up to 32 kg of thrust on 14S. Built for agriculture and cargo drones running 43 x 14 inch propellers.
Key Highlights
- 75KV windings tuned for large 43 x 14 inch propellers
- Up to 32 kg thrust on 14S, 26.5 kg on 12S
- 110 x 60 mm motor body with universal mounting
- Integrated aluminum mount and electronic speed controller
- CCW rotation version for multirotor pairing
- Suited to agriculture, cargo and heavy-lift airframes
Ideal For
- Agriculture drone builders assembling spray or spreader platforms
- Heavy-lift cargo multirotor designers
- Industrial inspection airframe integrators
- Large experimental UAV hobbyists and researchers
- Fleet operators stocking spare propulsion modules
Buying Tip
Confirm your frame's mounting hole pattern and your planned 12S or 14S power setup before ordering, and remember this is the CCW unit so you will need the CW version for a balanced build.
Elecvora expert review
Our verdict
A sensible choice for builders who want a matched motor, ESC and mount in one module instead of sourcing each part separately. The 75KV windings and 43 x 14 inch prop pairing are clearly aimed at lift rather than speed, and the 32 kg ceiling on 14S gives real headroom for agricultural and cargo work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated ESC and aluminum mount reduce assembly steps
- Up to 32 kg thrust on 14S for heavy payloads
- Low 75KV windings suited to large, efficient propellers
- Universal mounting adds frame flexibility
- Compact 110 x 60 mm motor body
Cons
- Sold as a single CCW unit, so a CW counterpart is needed
- Requires large 43 x 14 inch propellers, which add cost and space
- Higher voltage setups demand careful power system planning
Best for
Agriculture, cargo and heavy-lift multirotor builds
Not ideal for
Small freestyle, racing or lightweight cinematic quads
Specifications
| Motor KV (RPM/V) | 75 KV |
|---|---|
| Maximum Thrust (gm) | 12S(26.5Kg), 14S(32Kg) |
| Motor Body Dimension (mm) | 110 x 60mm |
| Mounting Type | Universal |
| Compatible Prop (inch) | 43 x 14 |
| Shipping Weight | 2.677 kg |
| Shipping Dimensions | 54 × 17 × 21 cm |
What's in the box
- 1 x K5 Epitome XT Ultra Propulsion System 75KV - CCW
Frequently Asked Questions
Is this a complete propulsion system or just a motor?
What is the difference between the 12S and 14S thrust figures?
Which propeller size should I use?
What does CCW mean for my build?
What is included in the package?
How should I look after the system?
Overview
The K5 Epitome XT Ultra is a propulsion system rather than a bare motor. Each unit pairs a 75KV outrunner with an integrated electronic speed controller and an aluminum mounting structure, giving heavy-lift builders a single module to bolt onto the frame. The low KV windings are matched to large 43 x 14 inch propellers, so the system generates lift through blade area and torque instead of high RPM.
This listing is the CCW rotation version. Multirotor builds normally pair it with the matching CW unit so counter-rotating props cancel torque.
Key Features
- 75KV motor: low-speed, high-torque windings designed around large propellers.
- High thrust output: rated to 26.5 kg on 12S and 32 kg on 14S.
- Integrated ESC: the speed controller is built into the assembly, reducing separate wiring and mounting work.
- Aluminum mounting: a sturdy metal interface with a universal mounting type for varied frame designs.
- Compact motor body: 110 x 60 mm, sized to fit heavy-lift boom layouts.
Specifications Explained
KV and propeller pairing
75KV means the motor turns 75 RPM per volt of input with no load. That low figure is intentional: it lets a 43 x 14 inch propeller spin at a controlled speed while drawing useful torque. Pairing the wrong propeller size will change current draw and thrust, so stay with the specified 43 x 14 inch size.
Thrust and voltage
The system is rated for 26.5 kg of maximum thrust on a 12S setup and 32 kg on 14S. Higher voltage unlocks the upper thrust figure, but it also raises the demands on your power distribution, connectors and wiring. Choose the voltage that matches your airframe's design and your ESC and battery ratings.
Dimensions and weight
The motor body measures 110 x 60 mm. Shipping weight is listed at 2.677 kg and shipping dimensions at 54 x 17 x 21 cm, which is useful when planning freight and spare-part logistics for a fleet.
Compatibility and Requirements
The mounting type is universal, which gives flexibility across custom booms and plate designs, though you should confirm your frame's hole pattern before ordering. The system is intended for 43 x 14 inch propellers and for 12S or 14S power setups as reflected in the thrust ratings. Because the ESC is integrated, review the assembly's wiring and control interface against your flight controller before installation. This is the CCW unit; a complete multirotor needs the corresponding CW version as well.
Typical Uses
Agriculture and crop-spraying drones are the natural fit, where steady lift and large props matter more than agility. The same qualities suit heavy-lift cargo platforms, large experimental multirotors and industrial inspection airframes that carry substantial payloads. It is not intended for small freestyle or racing quads.
What's in the Box
- 1 x K5 Epitome XT Ultra Propulsion System 75KV - CCW
Quick specs
- Motor KV (RPM/V)
- 75 KV
- Maximum Thrust (gm)
- 12S(26.5Kg), 14S(32Kg)
- Motor Body Dimension (mm)
- 110 x 60mm
- Mounting Type
- Universal
- Compatible Prop (inch)
- 43 x 14
- Shipping Weight
- 2.677 kg

















