
1 / 4 · Click to enlarge
AI Summary
A compact 12V DC peristaltic pump that moves up to 80 ml per minute while keeping liquid inside the tubing and away from the pump body. Its small 65 x 40 mm footprint and low 0.25 A draw make it easy to add to dosing, sampling and irrigation projects.
Key Highlights
- 12V DC operation with roughly 0.25 A current draw
- Flow rate up to 80 ml per minute
- Triple-roller head for consistent tube compression
- Compact 65 x 40 mm body weighing 96 g
- Liquid stays in the tube, not in the pump
- Speed adjustable with an external PWM signal
Ideal For
- Makers building automated dosing or liquid-handling rigs
- Lab technicians needing small-volume sampling and transfer
- Engineers prototyping ink, reagent or beverage dispensing
- Hobby growers setting up timed watering and irrigation
- Students and educators demonstrating peristaltic pumping
Buying Tip
Confirm your tubing fits the pump head and that your 12V supply can deliver at least 0.25 A before relying on the rated 80 ml/min flow.
Elecvora expert review
Our verdict
A tidy, low-power peristaltic pump that keeps fluids inside the tubing and fits easily into small builds. It is a sensible pick for intermittent dosing and sampling where 80 ml/min is enough.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fluid never contacts the pump mechanism
- Compact 65 x 40 mm, 96 g body
- Low 0.25 A current draw on 12V DC
- Triple-roller head for even compression
- Speed adjustable with PWM
Cons
- No power supply, tubing or controller included
- Rated for intermittent rather than continuous duty
- Maximum flow of 80 ml/min limits higher-volume tasks
Best for
Small-scale dosing, sampling and liquid transfer projects
Not ideal for
Continuous high-volume pumping or tasks needing more than 80 ml/min
Specifications
| Flow Rate (ml/min) | 80 |
|---|---|
| Voltage Rating (V) | 12VDC |
| Operating Current (A) | 0.25 |
| Model Series | NKP |
| Length (mm) | 65 |
| Width (mm) | 40 |
| Weight (g) | 96 |
| Shipping Weight | 0.101 kg |
| Shipping Dimensions | 13 × 9 × 1 cm |
What's in the box
- 1 x 12V NKP-DC-S10B Mini Peristaltic Pump
Frequently Asked Questions
Does the liquid touch the pump?
What power supply does it need?
Can I control the flow rate?
Is tubing included?
Can it run continuously?
What is it commonly used for?
Overview
The Kamoer NKP-DC-S10B is a miniature peristaltic pump from the NKP series. Instead of spinning an impeller through the fluid, it uses rollers to squeeze a flexible tube, so the liquid stays contained inside that tube and never enters the pump head. That makes it a practical choice when you want to move a liquid cleanly or swap between fluids by changing the tubing.
Powered from a 12V DC supply, the pump can move up to 80 ml per minute and draws around 0.25 A. The body measures 65 mm long and 40 mm wide and weighs 96 g, so it fits into small enclosures and benchtop setups without taking up much room.
Key Features
- Triple-roller pump head for steady, repeatable tube compression.
- Low-noise motor that suits desk, lab and indoor installations.
- Low power consumption at roughly 0.25 A on 12V DC.
- Compact footprint of 65 x 40 mm and just 96 g.
- Intermittent-duty friendly design for dosing and sampling tasks.
Specifications Explained
Flow rate
The rated 80 ml per minute is the maximum output. Actual delivery depends on the tubing you fit and how fast you drive the motor, so plan your dosing around measured results rather than the headline figure.
Voltage and current
The pump needs a 12V DC supply and pulls about 0.25 A under normal load. Check that your power source can deliver that current comfortably, especially if you run the pump alongside other electronics.
Size and weight
At 65 x 40 mm and 96 g, the pump is small enough for handheld devices, instrument housings and compact irrigation manifolds. Allow a little extra room for the tubing route.
Speed control
If you need to vary the flow, feed the motor a PWM signal from a controller. This lets you slow the pump for finer dosing instead of running it at full speed.
Compatibility and Requirements
The pump requires a 12V DC power source and flexible tubing suitable for peristaltic action. It does not include a power supply, controller or tubing in the box. For adjustable speed, a PWM signal source is needed. The pump is intended for intermittent working situations rather than continuous duty.
Typical Uses
- Liquid transfer, sampling and dispensing in medical and laboratory work
- Sample analysis and reagent dosing in chemical engineering
- Ink transfer and pipeline cleaning in printer setups
- Beverage dispensing and filling
- Sewage and environmental sampling
- Flower watering and garden irrigation
What's in the Box
1 x 12V NKP-DC-S10B Mini Peristaltic Pump.
Quick specs
- Flow Rate (ml/min)
- 80
- Voltage Rating (V)
- 12VDC
- Operating Current (A)
- 0.25
- Model Series
- NKP
- Length (mm)
- 65
- Width (mm)
- 40














