Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A polypropylene Y connector with 3.5 mm ID and 5.8 mm OD, designed for 3/16 inch tubing on compatible Kamoer pumps. It lets you split or merge fluid lines while keeping the setup compact and visible.

Key Highlights

  • Y-shaped splitter for 3/16 inch tubing runs
  • 3.5 mm inner diameter and 5.8 mm outer diameter
  • Natural translucent polypropylene body for flow visibility
  • Works with compatible Kamoer peristaltic and metering pumps
  • Good stiffness and heat resistance for routine use
  • Lightweight and easy to install in tight spaces

Ideal For

  • Lab technicians using Kamoer peristaltic pumps
  • Makers building automated dosing or metering systems
  • Aquarium and hydroponics hobbyists with fluid lines
  • Engineers maintaining titrimetric pump setups
  • Anyone needing a 3/16 inch Y splitter for Kamoer pumps

Buying Tip

Check that your tubing has a 3.5 mm inner diameter and that your pump is a compatible Kamoer model before ordering this connector.

Elecvora expert review

Our verdict

A straightforward, well-made Y connector that does exactly what it should for 3/16 inch tubing on Kamoer pumps. The translucent polypropylene body is a nice touch for quick visual checks, and the price makes it an easy spare to keep on hand.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Correct 3.5 mm ID for 3/16 inch tubing
  • Translucent body shows fluid flow
  • Polypropylene offers good stiffness and heat resistance
  • Lightweight and easy to install
  • Low-cost replacement or upgrade part

Cons

  • Only one connector included per pack
  • Not compatible with other tubing sizes
  • Requires compatible Kamoer pump models for best fit

Best for

Kamoer pump users needing a simple Y split for 3/16 inch tubing

Not ideal for

Systems using tubing other than 3/16 inch inner diameter

Specifications

Item TypeY Type Connector
Inner Diameter (mm)3.5
Outer Diameter (mm)5.8
Body MaterialPolypropylene
Connector TypeY Type - 3/16 Connector
ColorNatural Translucent
Shipping Weight0.03 kg
Shipping Dimensions9 × 7 × 1 cm

What's in the box

  • 1 x Y Type 3/16 Connector

Frequently Asked Questions

What is the inner diameter of this Y connector?
The inner diameter is 3.5 mm, which corresponds to 3/16 inch tubing.
Which pumps is this connector compatible with?
It is designed for use with a variety of Kamoer mini pumps, including peristaltic, metering and titrimetric pumps.
What material is the connector made from?
The body is made of polypropylene in a natural translucent colour.
How many connectors are included?
The package includes one Y Type 3/16 Connector.
Can I use this connector with other tubing sizes?
It is intended for 3/16 inch tubing with a 3.5 mm inner diameter; other sizes may not fit or seal properly.
How should I care for this connector?
Keep it clean and free of debris, and check the tubing connection regularly for a secure fit.

Overview

The Kamoer Y Type 3/16 Connector is a small but useful fitting for anyone working with flexible tubing on Kamoer mini pumps. It creates a Y junction so you can direct one fluid line into two, or combine two lines into one, without needing a custom manifold. The connector is made from polypropylene and has a natural translucent finish, so you can visually check that fluid is moving through the line. With a 3.5 mm inner diameter and a 5.8 mm outer diameter, it is sized for 3/16 inch tubing and fits into many peristaltic, metering and titrimetric pump setups.

Key Features

  • Y configuration: Splits or merges flow in a compact, single-piece fitting.
  • Polypropylene body: Offers good stiffness, forming properties and heat resistance compared with common low-pressure plastics.
  • Translucent natural colour: Makes it easy to see fluid presence and flow direction.
  • 3/16 inch compatibility: Matches tubing with a 3.5 mm inner diameter and 5.8 mm outer diameter.
  • Lightweight design: Adds almost no load to tubing runs and is simple to replace.

Specifications Explained

The 3.5 mm inner diameter is the key figure for tubing fit: it tells you the connector is intended for 3/16 inch tubing, so fluid passes through a narrow, controlled path. The 5.8 mm outer diameter gives the connector its external size, which matters when you are routing lines in tight enclosures or near other components. Polypropylene is a rigid, lightweight plastic that holds its shape well and resists heat better than some softer materials, making this connector suitable for typical pump duties. The natural translucent colour is not just cosmetic; it helps you confirm that liquid is present and moving. At only 0.03 kg shipping weight and 9 × 7 × 1 cm shipping dimensions, it is a small, easy-to-store spare.

Compatibility and Requirements

This connector is designed for use with a variety of Kamoer mini pumps, including peristaltic pumps, metering pumps and titrimetric pumps. It is intended for 3/16 inch tubing with a 3.5 mm inner diameter. No additional tools or adapters are listed; the connector simply pushes into compatible tubing. Always confirm your pump and tubing size before ordering, as other tubing dimensions may not seal properly.

Typical Uses

Use the Y connector to branch a single dosing line into two destinations, to combine two fluid sources into one pump inlet, or to create a simple recirculation loop. It is handy in lab setups, hobby dosing systems, aquaponics projects and small automated fluid-handling builds where a clean Y junction is needed.

What's in the Box

Package includes 1 x Y Type 3/16 Connector.

Quick specs

Item Type
Y Type Connector
Inner Diameter (mm)
3.5
Outer Diameter (mm)
5.8
Body Material
Polypropylene
Connector Type
Y Type - 3/16 Connector
Color
Natural Translucent
See all specifications