Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
L9110S Powerful Stepper Driver 2-CH Motro Driving Board Module — image 1
Hover to zoom

1 / 5 · Click to enlarge

L9110S Powerful Stepper Driver 2-CH Motro Driving Board Module

Phone Model
AI Summary
Battery Protection Module for everyday users

The L9110S Powerful Stepper Driver 2-CH Motro Driving Board Module is a mid-range battery protection module designed for everyday users. It features Model: L9110 L9110S and Types: Motor driver module.

₹1,540
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,540
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model: L9110 L9110S
Types: Motor driver module
Size: 5.0*4.0*3.0 cm
Weight: 75 g
One Package Weight: 0.08kgs / 0.18lb
One Package Size: 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-DIY4007Category: Battery Protection Module

About This Product

The L9110S Powerful Stepper Driver 2-CH Motro Driving Board Module is a mid-range battery protection module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model: L9110 L9110S
  • Types: Motor driver module
  • Size: 5.0*4.0*3.0 cm
  • Weight: 75 g
  • One Package Weight: 0.08kgs / 0.18lb
  • One Package Size: 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch
  • Best Sellers Rank (Consumer Electronics): #5915
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #192

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Main Features: 1. On-board two L9110S motor control chip 2. Can drive two DC motor or one 4-wire 2-phase stepper motor at the same time 3. Input voltage: 2.5 ~ 12V 4. Each channel has 800mA current output.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.