
1 / 3 · Click to enlarge
AI Summary
A tiny 868 MHz helix antenna that solders directly to your PCB and measures only about 22.45 mm long. It gives compact sub-GHz designs a 1.5 dBi, 50 ohm radiator for LoRa, smart meters and low-power radios.
Key Highlights
- 868 MHz helical design for sub-GHz radio links
- 1.5 dBi gain, dependent on the PCB ground plane
- VSWR of 1.5 or lower for a clean match
- Direct solder connection, no connector needed
- Approximately 22.45 mm long and 6 mm in diameter
- Rated to handle up to 10 W of RF power
Ideal For
- LoRa and sub-GHz radio module developers
- Smart meter and utility telemetry integrators
- IoT product designers needing a tiny 868 MHz antenna
- Makers prototyping low-power radio boards
- Technicians repairing 868 MHz hardware
Buying Tip
Confirm your PCB has a 50 ohm feed point and a reasonable ground plane before soldering, because the antenna's real gain depends on that ground plane.
Elecvora expert review
Our verdict
A practical, low-cost helix antenna for anyone building compact 868 MHz radios who can solder and has a sensible ground plane. It is not a plug-and-play part, but for the size and price it covers sub-GHz basics well.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small footprint at about 22.45 mm by 6 mm
- Direct solder mounting saves connector cost and height
- Good 1.5 dBi gain and low VSWR when used with a proper ground plane
- Handles up to 10 W and a wide temperature range
Cons
- Requires soldering and a suitable 50 ohm board layout
- Performance depends heavily on the PCB ground plane
- No connector or cable included, and tuning is fixed at 868 MHz
Best for
Compact 868 MHz LoRa, smart meter and low-power radio designs
Not ideal for
Users who need a plug-and-play antenna with a connector or a different frequency band
Specifications
| Item Type | Helix Antenna |
|---|---|
| Operating Frequency (MHz) | 868 |
| Gain | 1.5 dBi |
| VSWR | ≤1.5 |
| Antenna Gain | ~ 1.5 dBi (depends on PCB ground plane) |
| Model No. / Name | LWC-868-HELIX-03 |
| Polarization | Vertical |
| Power Handling (W) | 10 |
| Connector Type | Direct Solder |
| HPBW | H: 3600 ; V: 300 |
| Operating Temperature (°C) | -30 to 60 |
| Humidity Range | 5 – 95% |
| Length (mm) | 22.45 |
| Diameter (mm) | 6 |
| Weight (g) | 1 (approx) |
| Impedance (Ω) | 50 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x Helix Antenna 868MHz
Frequently Asked Questions
What frequency does this antenna cover?
How is the antenna mounted?
Does the gain stay at 1.5 dBi?
How much power can it handle?
What is included with the antenna?
How should I care for it?
Overview
The LAMBDOID LWC-868-HELIX-03 is a compact helical antenna tuned for 868 MHz operation. Instead of a straight whip, the radiating element is wound into a helix, which packs a usable sub-GHz radiator into a very small volume. It is intended for direct soldering to a PCB, making it a neat fit for designs where a connector would add cost, height or assembly steps.
At roughly 22.45 mm long, 6 mm in diameter and about 1 g in weight, it is small enough to sit inside handheld enclosures and sensor nodes. The 50 ohm impedance matches common radio front ends, and the vertical polarisation with a 360 degree horizontal half-power beamwidth keeps coverage even around the axis of the antenna.
Key Features
- 868 MHz tuning for sub-GHz radio modules and telemetry links.
- 1.5 dBi gain that varies with the size of the PCB ground plane.
- VSWR of 1.5 or lower for efficient power transfer at the feed point.
- Direct solder mounting that removes the need for a separate connector.
- 10 W power handling for low and moderate power radio designs.
- Wide operating window from -30 to 60 degrees Celsius and 5 to 95 percent humidity.
Specifications Explained
Frequency and gain
The antenna is centred on 868 MHz, the common sub-GHz band used by many low-power radio systems. Its gain is quoted at about 1.5 dBi, but the final figure depends on the ground plane of the PCB it is soldered to. A larger, well-designed ground plane generally helps the antenna perform closer to its rated gain.
VSWR and impedance
A VSWR of 1.5 or below means most of the transmitter power reaches the antenna rather than reflecting back into the radio. The 50 ohm impedance is the standard used by most RF modules, so no matching network redesign is usually needed if your board is already laid out for 50 ohms.
Polarisation and beamwidth
Vertical polarisation with a 360 degree horizontal beamwidth makes the antenna fairly forgiving of orientation in the horizontal plane. The vertical beamwidth of 30 degrees is narrower, so keep the antenna upright relative to the opposing node where possible.
Power and environment
The 10 W power rating comfortably covers typical low-power radio use. The -30 to 60 degrees Celsius range and 5 to 95 percent humidity range suit indoor and sheltered outdoor enclosures.
Compatibility and Requirements
The antenna is designed for direct soldering, so the board needs a 50 ohm feed point and a suitable ground plane. It is intended for 868 MHz radios; other frequencies are outside its tuning range. No connector is supplied, and no cable is included. Correct soldering technique and a clean joint are important for RF performance.
Typical Uses
- LoRa and other long-range sub-GHz links
- Smart meter and utility telemetry
- Low-power radio (LPR) devices
- Compact sensor nodes and IoT boards
- Repair or prototyping of 868 MHz hardware
What's in the Box
One LAMBDOID 868 MHz helix antenna is included. Nothing else is supplied.
Quick specs
- Item Type
- Helix Antenna
- Operating Frequency (MHz)
- 868
- Gain
- 1.5 dBi
- VSWR
- ≤1.5
- Antenna Gain
- ~ 1.5 dBi (depends on PCB ground plane)
- Model No. / Name
- LWC-868-HELIX-03














