
1 / 3 · Click to enlarge
AI Summary
A straight SMA female-to-female barrel adapter that connects two SMA male connectors in line. Its 50 Ohm impedance, 18GHz rating and 1.23:1 VSWR keep the junction electrically clean in RF and antenna setups.
Key Highlights
- SMA female to SMA female straight in-line barrel design
- 50 Ohm impedance matched to common RF and coax systems
- 18GHz frequency rating for high-band work
- Maximum VSWR of 1.23:1 for a clean junction
- Gold body material for corrosion resistance
- Compact 1 x 1 x 1 cm form factor, weighs about 1 g
Ideal For
- RF technicians joining two SMA male patch leads
- Antenna installers working with SMA male terminations
- Wi-Fi and wireless LAN hardware users needing an in-line junction
- Bench testers who want a spare 50 Ohm barrel adapter
- FPV and RC builders using SMA male antenna connectors
Buying Tip
Check the gender of both connectors you plan to join — this adapter is female on both ends, so it only mates with SMA male plugs.
Elecvora expert review
Our verdict
A tidy, well-specified barrel adapter for the narrow job of joining two SMA male connectors. The 50 Ohm impedance, 18GHz rating and 1.23:1 VSWR put it above generic no-name barrels on paper.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Female-to-female layout solves a common gender mismatch
- 18GHz rating with 1.23:1 maximum VSWR
- Gold body for corrosion resistance
- Straight in-line form keeps cable runs clean
- Very light and easy to store as a spare
Cons
- Only joins SMA male to SMA male, no other families
- No package contents beyond the adapter itself
- Small part is easy to misplace in a field bag
Best for
RF, antenna and Wi-Fi users joining two SMA male connectors
Not ideal for
Anyone needing to convert between different connector types or change gender at one end
Specifications
| Manufacturer | Generic |
|---|---|
| Gender | Female |
| Impedance (Ω) | 50 |
| Frequency Rating | 18GHz |
| VSWR | 1.23:1 |
| Body Material | Gold |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x SMA(F) to SMA(F) Adapter
Frequently Asked Questions
What does this adapter actually connect?
Will it work with my existing cables?
Does it need power or soldering?
What impedance and frequency is it rated for?
What is included with the adapter?
How should I care for it?
Overview
The LAMBDOID SMA(F) to SMA(F) Adapter is a short, straight coaxial barrel that connects two SMA male connectors face to face. Both sides are female, so it solves the common problem of joining two male-terminated cables, antennas or device ports without swapping hardware. It is a passive, in-line part: no soldering, no power and no configuration, just a threaded junction between two leads.
Because it is specified at 50 Ohm with an 18GHz frequency rating and a maximum VSWR of 1.23:1, the adapter is intended for buyers who care about the electrical quality of that junction rather than treating it as a purely mechanical part.
Key Features
- Female-to-female SMA interface: mates with SMA male connectors on both ends.
- Straight in-line body: keeps cable runs tidy and avoids right-angle strain.
- 50 Ohm impedance: matches the impedance used across most RF, antenna and coaxial equipment.
- 18GHz frequency rating: suitable for high-frequency work up to that figure.
- 1.23:1 maximum VSWR: a low reflection figure that helps preserve signal quality.
- Gold body material: chosen for corrosion resistance and stable contact over repeated use.
Specifications Explained
Impedance (50 Ohm) is the standard for most RF systems, antennas and coaxial cable assemblies. Matching it here means the adapter does not introduce a deliberate impedance mismatch into your chain.
Frequency rating (18GHz) states the range the adapter is rated for. If your work sits well below that ceiling, you are operating with margin.
VSWR (1.23:1 maximum) describes how much signal is reflected at the junction. Lower is better; 1.23:1 is a modest reflection figure for a small barrel adapter.
Gender (female) applies to both ends, which is the detail buyers most often get wrong. Check that both of your mating connectors are male SMA before ordering.
Gold body is the finish called out in the specifications, and the adapter is very light at roughly 1 g with shipping dimensions of 1 x 1 x 1 cm.
Compatibility and Requirements
This adapter fits SMA male connectors on both sides. It does not convert between connector families and it does not change gender at either end. Confirm the gender of your existing connectors before purchase. No tools beyond your usual SMA tightening method are required, and no power source is involved.
Typical Uses
- Joining two SMA male coaxial patch leads in line.
- Extending an antenna feed where both ends terminate in SMA male.
- Bench and test setups that need a quick gender-matched junction.
- Wireless LAN devices, Wi-Fi radios and external antenna hardware using SMA male ports.
- A spare barrel in an RF tool kit or field bag.
What's in the Box
One SMA(F) to SMA(F) Adapter. No cables, tools or mounting hardware are included.
Quick specs
- Manufacturer
- Generic
- Gender
- Female
- Impedance (Ω)
- 50
- Frequency Rating
- 18GHz
- VSWR
- 1.23:1
- Body Material
- Gold



















