Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A straight 75 ohm BNC male bulkhead connector with solder termination and a nickel-plated zinc alloy body. It gives panels and enclosures a fixed, secure coaxial port for video and RF cabling.

Key Highlights

  • Straight male BNC plug with standard polarity
  • Bulkhead panel mount design for fixed coaxial ports
  • Solder termination on centre contact and shield
  • 75 ohm impedance for video and broadcast cabling
  • Zinc alloy body with durable nickel plating
  • Compact, lightweight component for installation work

Ideal For

  • Technicians building panel-mounted coaxial ports
  • Video and broadcast installers working with 75 ohm cable
  • CCTV, CATV and monitor wiring projects
  • Makers building custom cable assemblies and enclosures
  • Bench and instrumentation setups needing a fixed BNC connection

Buying Tip

Confirm your cable and equipment are 75 ohm before ordering, and check that you have a soldering iron and a panel opening that suits a bulkhead fitting.

Elecvora expert review

Our verdict

A straightforward bulkhead BNC plug for 75 ohm installations where a fixed, soldered panel connection is wanted. It is a simple component, so the result depends mostly on careful soldering and correct panel fitting.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Bulkhead mount creates a stable, fixed coaxial port
  • 75 ohm rating suits video and broadcast cabling
  • Nickel-plated zinc alloy body for a rigid housing
  • Standard BNC bayonet coupling for familiar mating

Cons

  • Requires soldering, so tools and skill are needed
  • Only suitable for 75 ohm systems
  • Mounting hardware and cable are not included

Best for

Panel-mounted 75 ohm coaxial connections in video, broadcast and CCTV work

Not ideal for

Tool-free installation or 50 ohm RF systems

Specifications

ManufacturerElecBee
OrientationStraight
GenderMale
Mounting TypePanel Mount / Cable
Termination StyleSolder Type
Mounting FeatureBulkhead
PolarityStandard
Body MaterialZinc Alloy
Body PlatingNickel Plating
Impedance (Ω)75
Shield TerminationSolder
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x BNC Bulkhead Plug Connector, Straight Solder Type

Frequently Asked Questions

Is this connector 50 or 75 ohm?
It is rated at 75 ohm impedance, so it should be paired with 75 ohm coaxial cable and matching equipment.
Does it require soldering?
Yes. Both the centre contact and the shield are terminated by soldering, so a soldering iron is needed.
What does bulkhead mounting mean?
The connector mounts through a panel or enclosure wall, creating a fixed coaxial port rather than a loose cable end.
Will it mate with a standard BNC jack?
Yes. It is a standard-polarity male BNC plug with bayonet coupling, designed to mate with conventional BNC jacks.
What is included in the package?
The package contains one BNC bulkhead plug connector, straight solder type. Cable and mounting hardware are not listed.
How should I care for the connector?
Keep the mating surfaces clean and dry, avoid strain on the soldered joint, and store it protected before installation.

Overview

The ElecBee BNC bulkhead plug connector is a straight, male coaxial connector built to be mounted through a panel or enclosure wall. Instead of leaving a cable end loose, the bulkhead fitting creates a fixed port that cables can be connected to and disconnected from repeatedly. Termination is by soldering, so the centre conductor and the shield are joined permanently to the cable for a stable electrical connection.

The connector uses a zinc alloy body with nickel plating and is rated at 75 ohm impedance. It is a standard-polarity BNC plug, so it mates with conventional BNC jacks using the familiar bayonet coupling.

Key Features

  • Bulkhead mounting: the connector passes through a panel for a fixed, tidy coaxial entry point.
  • Solder termination: both the centre contact and the shield are soldered for a permanent joint.
  • 75 ohm impedance: suited to coaxial cable runs used for video and broadcast signals.
  • Nickel-plated zinc alloy body: a rigid metal housing with a plated finish.
  • Straight orientation: the cable exits in line with the connector for simple routing.
  • Standard polarity: mates with ordinary BNC jacks via bayonet coupling.

Specifications Explained

75 ohm impedance is the figure to check first. Coaxial connectors and cables should share the same impedance, so this part belongs on 75 ohm cable runs rather than 50 ohm systems.

Bulkhead mounting means the connector is fixed to a panel, giving the cable a solid anchor point and protecting the solder joint from strain. Solder termination is a permanent method: it holds well but requires a soldering iron and some care during assembly.

Male gender with standard polarity describes a plug that mates with a corresponding jack. The zinc alloy body with nickel plating provides a metal housing for the connector.

Compatibility and Requirements

This connector is intended for 75 ohm coaxial cable and mates with standard BNC jacks. Installation requires soldering equipment for both the centre conductor and the shield, plus a panel opening suitable for bulkhead mounting. No cable, mounting hardware or tools are included unless stated in the package contents.

Typical Uses

Bulkhead BNC connectors are commonly used where a cable must enter an enclosure or equipment panel: video and broadcast installations, monitor and recorder connections, CCTV and CATV wiring, antenna feeds, and bench or instrumentation setups. They also suit anyone building custom cable assemblies who wants a fixed connector rather than a free-hanging plug.

What's in the Box

One BNC bulkhead plug connector, straight solder type.

Quick specs

Manufacturer
ElecBee
Orientation
Straight
Gender
Male
Mounting Type
Panel Mount / Cable
Termination Style
Solder Type
Mounting Feature
Bulkhead
See all specifications