Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A straight female F connector that solders directly to a PCB through through-hole terminals, rated at 50 ohm impedance. Its compact, panel-free design saves installation space in set-top boxes and RF board layouts.

Key Highlights

  • Straight female F connector with standard polarity
  • 50 ohm impedance for RF signal paths
  • Through-hole termination for direct PCB soldering
  • Nickel-plated zinc alloy body for durability
  • No mounting feature, keeping the footprint compact
  • Lightweight at just 0.001 kg shipping weight

Ideal For

  • RF board designers specifying a compact on-board coaxial jack
  • Repair technicians replacing a failed PCB-mount F connector
  • Satellite and set-top box manufacturers building receiver boards
  • Hobbyists and students working on 50 ohm RF projects
  • CATV equipment builders needing a straight female board interface

Buying Tip

Confirm your PCB pad spacing and trace impedance match this through-hole 50 ohm jack before ordering, since it is a solder-in board part rather than a panel connector.

Elecvora expert review

Our verdict

A straightforward, well-specified board-level F jack that does exactly one job: putting a female coaxial interface directly on a PCB. The 50 ohm rating and nickel-plated zinc alloy body are sensible choices for compact RF designs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact, panel-free design saves board space
  • Through-hole legs give a solid mechanical and electrical joint
  • Nickel-plated zinc alloy body is rigid and neatly finished
  • Clear 50 ohm impedance specification

Cons

  • Requires soldering and a matching PCB footprint
  • No mounting feature, so it cannot be panel-mounted
  • Mating plug and cable are not included

Best for

Board-level RF interfaces in set-top boxes, CATV gear and compact 50 ohm designs

Not ideal for

Panel or bulkhead installations that need a chassis-mounted connector

Specifications

ManufacturerElecBee
OrientationStraight
GenderFemale
Mounting TypePCB Mount
Termination StyleThrough Hole
Mounting FeatureNone
PolarityStandard
Body MaterialZinc Alloy
Body PlatingNickel Plating
Impedance (Ω)50
Shield TerminationNA
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x F Connector Coaxial Straight Female Through Hole For PCB Mount

Frequently Asked Questions

Is this connector male or female?
It is a female F connector with standard polarity. A mating F plug is required to make a connection.
How is it mounted?
It is a PCB mount part with through-hole termination, so the legs pass through the board and are soldered in place. There is no separate mounting feature.
What impedance is it rated for?
The connector is specified at 50 ohm. It should be used in a 50 ohm signal path rather than a 75 ohm system.
What is the body made of?
The body is zinc alloy with nickel plating, giving a rigid metal shell with a consistent finish.
What is included with the connector?
The package contains one F connector. A mating plug, coaxial cable and any mounting hardware are not included.
How should I care for it?
Keep the interface clean and dry, avoid bending the soldered legs, and do not over-tighten the mating plug when connecting.

Overview

The ElecBee F Connector is a board-mount coaxial jack built for designs where the RF interface sits directly on the printed circuit board. It is a straight, female connector with standard polarity, terminated through hole so the legs pass through the board and can be soldered in place. The body is made from zinc alloy with nickel plating, and the connector is specified at 50 ohm impedance.

Because it has no mounting feature such as a bulkhead or flange, it occupies minimal space and is suited to compact layouts where a panel connector would be impractical.

Key Features

  • Straight orientation: the mating axis runs perpendicular to the board, keeping the cable path predictable.
  • Female interface: accepts a standard mating F plug in a conventional configuration.
  • Through-hole termination: legs pass through plated holes for a mechanically stable solder joint.
  • Nickel-plated zinc alloy body: a durable metal shell with a clean, corrosion-resistant finish.
  • 50 ohm impedance: matched to common RF board designs.

Specifications Explained

Impedance (50 ohm) is the headline number. Impedance matching matters in RF work because mismatches cause signal reflections and loss. This connector is specified at 50 ohm, so it should be paired with 50 ohm trace and cable designs rather than 75 ohm systems.

Mounting type and termination go together: the connector is a PCB mount part with through-hole legs. That means it is soldered, not screwed or crimped, and it relies on the board for mechanical support. There is no separate mounting feature, so no panel cut-out or bulkhead nut is required.

Body material and plating describe the shell: zinc alloy gives rigidity, while nickel plating provides a consistent surface finish.

Compatibility and Requirements

This is a female F connector with standard polarity. It requires a PCB with through-hole pads spaced to match the connector legs, and it should be used in a 50 ohm signal environment. The connector is a board component, so a mating F plug and suitable coaxial cable are needed to complete a link; these are not included.

Typical Uses

  • Satellite set-top boxes and receiver boards
  • CATV and cable network equipment
  • Consumer electronics with an on-board RF input
  • Prototype and repair work on RF front ends

What's in the Box

One ElecBee F Connector Coaxial Straight Female Through Hole for PCB Mount.

Quick specs

Manufacturer
ElecBee
Orientation
Straight
Gender
Female
Mounting Type
PCB Mount
Termination Style
Through Hole
Mounting Feature
None
See all specifications