Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A female straight BNC jack for PCB or bulkhead mounting with solder termination and a nickel-plated zinc alloy body. It handles both 50 and 75 ohm systems, making it a versatile interface for radio, video and test gear.

Key Highlights

  • Female BNC jack with straight 180-degree orientation
  • Solder termination for secure board or panel wiring
  • Supports both 50 ohm and 75 ohm impedance systems
  • Nickel-plated zinc alloy body for environmental protection
  • Bulkhead and through-hole mounting options
  • Compact footprint for space-limited installations

Ideal For

  • RF and video board designers needing a panel or PCB BNC interface
  • Technicians repairing CCTV, broadcast and monitor equipment
  • Makers building antenna and cable assemblies
  • Test and instrumentation engineers working with 50 or 75 ohm signals

Buying Tip

Check whether your system is 50 ohm or 75 ohm and confirm the PCB hole or panel cutout dimensions against the schematic before soldering.

Elecvora expert review

Our verdict

A dependable, no-frills BNC jack that covers both 50 and 75 ohm work and installs easily on a board or panel. Its nickel-plated zinc alloy body and solder termination make it a sensible choice for repair and prototype builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual 50/75 ohm impedance support
  • Flexible PCB and bulkhead mounting
  • Durable nickel-plated zinc alloy body
  • Compact footprint
  • Standard bayonet interface

Cons

  • Requires soldering
  • No cable or hardware included
  • Impedance must be matched by the user

Best for

Board-level and panel-mount RF and video interfaces

Not ideal for

Plug-and-play cable-only setups with no soldering

Specifications

ManufacturerElecBee
OrientationStraight
GenderFemale
Mounting TypePCB Mount / Panel Mount
Termination StyleSolder Type
Mounting FeatureBulkhead / Through Hole
PolarityStandard
Body MaterialZinc Alloy
Body PlatingNickel Plating
Impedance (Ω)75, 50
Shield TerminationNA
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Straight PCB Mount BNC Jack

Frequently Asked Questions

Is this a male or female connector?
It is a female BNC jack with standard polarity, so it mates with standard male BNC plugs.
Does it work with both 50 ohm and 75 ohm systems?
Yes, the connector is listed for both 50 ohm and 75 ohm impedance. Match it to your cable and equipment impedance.
How is it mounted?
It supports PCB mount and panel mount, with bulkhead or through-hole fixing.
Do I need to solder it?
Yes, the termination style is solder type, so soldering is required during installation.
What is included in the package?
The package includes one Straight PCB Mount BNC Jack. Refer to the schematic image for dimensional details.
How should I care for the connector?
Keep the interface clean and dry, avoid forcing the bayonet coupling, and inspect solder joints if signal quality drops.

Overview

The ElecBee Straight PCB Mount BNC Jack is a female RF connector designed for board-level and panel-level installation. It uses a standard-polarity bayonet interface, so it mates with conventional BNC plugs and is suited to both 50 ohm and 75 ohm signal paths. The body is made from zinc alloy with nickel plating, giving the connector a durable, corrosion-resistant exterior.

Mounting is flexible: the jack can be fitted as a bulkhead connector or soldered through holes on a PCB. Termination is solder type, which keeps the joint mechanically solid and electrically stable once installed.

Key Features

  • Straight orientation: the 180-degree body keeps the cable run inline with the board or panel.
  • Female jack interface: standard BNC polarity for mating with male BNC plugs.
  • Dual impedance support: works in 50 ohm and 75 ohm systems.
  • Nickel-plated zinc alloy body: resists everyday environmental exposure.
  • Solder termination: a direct, reliable connection for hand or production soldering.
  • Compact design: requires little installation space.

Specifications Explained

Impedance (50/75 ohm): the connector is listed for both impedance families, so you can match it to your cable and equipment rather than stocking two separate parts. Confirm your system impedance before ordering.

Mounting type: PCB mount and panel mount are both supported, with bulkhead or through-hole fixing. This makes the jack usable on a circuit board or through a chassis wall.

Termination style: solder type means the centre contact and shield are soldered, which is a common approach for repair work and small-batch assembly.

Body material and plating: zinc alloy with nickel plating provides a rigid shell with a protective finish.

Compatibility and Requirements

This is a standard-polarity female BNC jack, so it mates with standard male BNC plugs. It is intended for 50 ohm or 75 ohm systems and requires soldering during installation. A suitable panel cutout or PCB hole pattern is needed for bulkhead or through-hole mounting.

Typical Uses

Common applications for BNC connectors include antennas, cable assemblies, radios, video and broadcast equipment, telecom and satcom gear, monitors, recorders, switchers, base stations, medical equipment, instrumentation, CCTV, CATV and HDTV.

What's in the Box

One Straight PCB Mount BNC Jack is included. Refer to the schematic image for dimensional details.

Quick specs

Manufacturer
ElecBee
Orientation
Straight
Gender
Female
Mounting Type
PCB Mount / Panel Mount
Termination Style
Solder Type
Mounting Feature
Bulkhead / Through Hole
See all specifications