Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact adapter that turns a Q9 BNC connection into two sets of dual 4mm banana jacks. It lets you bridge BNC test points and banana test leads without making up new cables.

Key Highlights

  • Converts Q9 BNC to two dual 4mm banana jacks
  • Male and female jack arrangement for flexible mating
  • Accepts banana plugs, spade lugs and wire leads
  • Double tail hole fits a 5mm banana plug
  • Compact 58 x 28 x 13 mm body weighs 24 g
  • Useful for oscilloscopes, signal generators and radio gear

Ideal For

  • Electronics hobbyists bridging BNC and banana test points
  • Lab and repair technicians using oscilloscopes and generators
  • QRP and amateur radio operators adapting antenna connections
  • Students and makers building test jigs and four-terminal networks

Buying Tip

Check that your equipment uses a Q9 BNC fitting on one side and 4mm or 5mm banana terminations on the other before ordering, as this adapter bridges only those standards.

Elecvora expert review

Our verdict

A simple, well-sized transition piece for benches where BNC and banana connectors coexist. It does one job without fuss and takes up almost no space.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Bridges Q9 BNC and dual 4mm banana connections in one part
  • Accepts banana plugs, spade lugs and wire leads
  • Double tail hole adds 5mm banana plug support
  • Light 24 g body with compact 58 x 28 x 13 mm footprint

Cons

  • Passive adapter only, so it cannot correct signal or impedance issues
  • No cables or probes included
  • Compatibility limited to the two connector standards listed

Best for

Bench and field setups that need a quick BNC-to-banana transition

Not ideal for

Projects requiring a different connector standard or active signal conversion

Specifications

ManufacturerGeneric
Connector TypeMale and Female Dual 4mm Bananas
CompatibilityEnables Connection Adaptation
Dimensions (L x W x H) mm58 x 28 x 13
Weight (g)24
GenderFemale
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Q9 BNC to dual 4mm banana male and female jack adapter

Frequently Asked Questions

What does this adapter actually do?
It bridges a Q9 BNC connection and two sets of dual 4mm banana jacks, so equipment with different connector types can be joined. It is a passive part and does not alter the signal.
Which banana plugs fit the jacks?
The binding posts accept 4mm banana plugs, spade lugs and wire leads. The double tail hole also accepts a 5mm banana plug.
Does it need power or a driver?
No. The adapter is passive and requires no power source, software or driver to work.
Is it male or female?
The product data lists a female gender for the jack side, with a male and female dual 4mm banana arrangement. Check the mating ends against your leads.
What is included with the adapter?
One adapter is supplied. Cables, probes and mounting hardware are not included.
How should I care for it?
Keep the contacts clean and dry, avoid pulling on leads to disconnect, and store it in a dry place when not in use.

Overview

The Generic Q9 BNC to Dual 4mm Banana adapter is a small passive connector that bridges two common standards found on test benches and in electronic assemblies. On one side it presents a Q9 BNC interface; on the other it provides two sets of dual 4mm banana jacks in a male and female arrangement. The result is a simple way to join a BNC test point to banana test leads, binding posts or spade lugs without soldering a custom cable.

At 58 x 28 x 13 mm and 24 g, the adapter is light enough to hang from a lead and small enough to tuck into a tool case. It is a passive part with no power requirement, so it can be used wherever the two connector types need to meet.

Key Features

  • Two connector families in one body: a Q9 BNC interface paired with dual 4mm banana jacks.
  • Male and female jacks: the mixed arrangement gives more mating options on the banana side.
  • Flexible termination: binding posts accept banana plugs, spade lugs or wire leads.
  • Double tail hole: a 5mm banana plug can also be inserted.
  • Bench-friendly size: compact moulded body that stays out of the way.

Specifications Explained

The connector type is the headline specification: a Q9 BNC on one end and dual 4mm banana male and female jacks on the other. In practice this means the adapter is a transition piece, not a signal processor, so it does not change the signal passing through it.

The 58 x 28 x 13 mm dimensions describe the body only and help you judge clearance around crowded panels and test points. At 24 g, the adapter adds almost nothing to the load on a lead or probe. The female gender noted in the data refers to the jack side, which receives banana plugs and similar terminations.

Compatibility and Requirements

The adapter is intended for connection adaptation between Q9 BNC fittings and dual 4mm banana connections. It works with banana plugs, spade lugs and wire leads at the binding posts, and the double tail hole accepts a 5mm banana plug. No power source, driver or software is needed. Match the adapter to the connector types on your equipment before ordering, since it only bridges these two standards.

Typical Uses

Common applications include oscilloscopes, frequency generators, QRP radio rigs, dipole and other radio antennas, and four-terminal network isolation. It is also handy in electronics labs, educational setups, medical equipment, temperature sensor work, automotive and marine electrical testing, lighting and household appliance repair, and general electrical installation where dissimilar connectors must meet.

What's in the Box

One Q9 BNC to dual 4mm banana male and female jack adapter is supplied. No cables, probes or mounting hardware are included.

Quick specs

Manufacturer
Generic
Connector Type
Male and Female Dual 4mm Bananas
Compatibility
Enables Connection Adaptation
Dimensions (L x W x H) mm
58 x 28 x 13
Weight (g)
24
Gender
Female
See all specifications