Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A straight cable-mount BNC female jack with solder cup termination and locking wire, built for permanent coaxial cable assemblies. Its nickel-plated zinc alloy body and bayonet coupling make it a dependable choice for antenna, video and radio cabling.

Key Highlights

  • Straight BNC female jack for cable-mount coaxial assemblies
  • Solder cup centre contact and solder shield termination
  • Zinc alloy body with nickel plating for durability
  • Bayonet coupling for quick connect and disconnect
  • Available in 50 and 75 ohm impedance versions
  • Locking wire design helps hold the connection secure

Ideal For

  • RF technicians building custom coaxial cable assemblies
  • CCTV and CATV installers terminating video cable
  • Amateur radio and antenna experimenters
  • Broadcast and telecom bench engineers
  • Makers repairing or extending RF signal leads

Buying Tip

Confirm whether your cable and equipment are 50 ohm or 75 ohm before ordering, and check that your BNC mating plug is standard polarity.

Elecvora expert review

Our verdict

A straightforward, well-finished cable-mount BNC jack for anyone who prefers soldered joints over crimping. The nickel-plated zinc body and locking wire make it a sensible choice for durable custom leads.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Solder cup and solder shield suit permanent, low-tooling assemblies
  • Nickel-plated zinc alloy body feels solid
  • Straight layout is easy to route in tight spaces
  • Available in both 50 and 75 ohm impedance

Cons

  • Requires soldering skill and equipment
  • No cable or mating plug included
  • Impedance must be chosen carefully to match the cable

Best for

Custom coaxial cable assemblies and field repairs

Not ideal for

Users wanting tool-free or crimp-only installation

Specifications

ManufacturerElecBee
OrientationStraight
GenderFemale
Mounting TypeCable
Termination StyleSolder Cup
PolarityStandard
Body MaterialZinc Alloy
Body PlatingNickel Plating
Impedance (Ω)75, 50
Shield TerminationSolder
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x BNC Female For Cable Straight RF Connector Locking Wire

Frequently Asked Questions

Is this a male or female connector?
It is a female BNC jack with standard polarity, so it mates with a standard male BNC plug.
Does it need soldering?
Yes. It uses a solder cup centre contact and solder shield termination, so a soldering iron and solder are required.
Which impedance should I choose?
Match the connector to your cable and equipment. Both 50 ohm and 75 ohm versions are listed, so pick the one that fits your signal path.
What is included in the package?
The package contains one BNC female straight cable-mount RF connector with locking wire. Cable and tools are not included.
Can it be used for CCTV and video?
Yes, it is listed for CCTV, CATV, HDTV, video and broadcast connections, provided the impedance matches your system.
How should I care for the connector?
Keep the contacts clean and dry, avoid bending the cable sharply at the joint, and check the solder joints if the signal becomes intermittent.

Overview

The ElecBee BNC Female For Cable Straight RF Connector is a cable-mount jack for building or repairing coaxial cable runs. It terminates to cable by soldering both the centre contact and the shield, which makes it a practical option for anyone who wants a fixed, reliable joint without investing in crimp tooling. The straight orientation keeps the cable exit in line with the connector, which helps in tight enclosures and simple point-to-point wiring.

Key Features

  • Straight cable-mount jack: a female BNC connector designed to sit directly on the end of a coaxial cable.
  • Solder cup termination: the centre contact accepts a soldered wire for a permanent electrical joint.
  • Solder shield termination: the cable shield is also soldered, supporting a continuous ground path.
  • Zinc alloy body with nickel plating: a solid metal shell with a plated finish for everyday handling and corrosion resistance.
  • Locking wire: an added retention detail that helps keep the assembly secure where vibration is a concern.
  • Bayonet coupling: the familiar quarter-turn BNC interface for fast mating and release.

Specifications Explained

Impedance (50 and 75 ohm): the connector is offered in both common coaxial impedance classes. Match the connector to your cable and equipment impedance so the signal path stays consistent.

Gender and polarity: this is a standard-polarity female jack, so it mates with a standard male BNC plug.

Orientation: the straight body is the simplest layout for cable ends and panel-adjacent wiring.

Termination: solder cup and solder shield mean the installer solders rather than crimps, which suits custom lengths and field repairs.

Body: zinc alloy with nickel plating gives a rigid shell that holds its shape through repeated mating.

Compatibility and Requirements

This connector is intended for cable mounting and requires soldering of both the centre conductor and the shield. Choose the 50 or 75 ohm version to match your cable and the equipment at each end. It uses the standard BNC bayonet interface, so it pairs with standard BNC male plugs. A soldering iron, solder and basic cable preparation tools are needed; these are not included.

Typical Uses

Suitable for antenna leads, cable assemblies, automotive and radio wiring, video and broadcast links, telecom and satcom equipment, monitors, recorders, switchers, base stations, medical equipment, instrumentation, CCTV, CATV and HDTV connections.

What's in the Box

  • 1 x BNC Female For Cable Straight RF Connector Locking Wire

Quick specs

Manufacturer
ElecBee
Orientation
Straight
Gender
Female
Mounting Type
Cable
Termination Style
Solder Cup
Polarity
Standard
See all specifications