Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A slim 130 mm 2.4 GHz dipole antenna with a UFL connector, 3 dBi gain and 50 ohm impedance. It is a low-cost way to add or replace an antenna on compact WiFi, Bluetooth, Zigbee and ISM devices.

Key Highlights

  • 2.4 GHz dipole antenna tuned for 2400 MHz wireless links
  • UFL connector for small modules and space-limited builds
  • 3 dBi gain with VSWR below 2.0 for a clean match
  • Slim 130 x 6 mm body weighing only about 3 g
  • Handles up to 10 W with 50 ohm impedance
  • Rated for -30 to 60 degrees Celsius and 5 to 75 percent humidity

Ideal For

  • Makers building WiFi or Bluetooth sensor nodes
  • Technicians replacing a damaged 2.4 GHz antenna
  • Zigbee and ISM band prototype developers
  • Integrators working with compact UFL-equipped modules
  • Hobbyists repairing small wireless devices

Buying Tip

Confirm your radio module uses a UFL connector and a 50 ohm 2.4 GHz feed before ordering, since no pigtail or adapter is included.

Elecvora expert review

Our verdict

A sensible, low-cost 2.4 GHz dipole for compact UFL-equipped designs where a broad pattern matters more than gain. It is simple, light and easy to fit, provided you respect the small connector and keep it dry.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very light at about 3 g
  • Broad 360-degree horizontal pattern
  • VSWR below 2.0 at 2400 MHz
  • Handles up to 10 W
  • Compact 130 x 6 mm body

Cons

  • UFL connector is fragile and needs care
  • Not described as waterproof
  • No pigtail or mounting hardware included

Best for

Compact 2.4 GHz WiFi, Bluetooth, Zigbee and ISM builds with UFL feeds

Not ideal for

Outdoor installations exposed to rain or high-gain long-range links

Specifications

Item TypeDipole Antenna
Operating Frequency (MHz)2400
Gain3
Model No. / NameLWC-2400-DIP-03 (V1.0)
Operating Temperature (°C)-30° to 60° C
Humidity Range5 – 75%
VSWR<2.0
PolarizationVertical
Power Handling (W)10
HPBWH: 360°; V: 30°/ 40°
Connector TypeUFL
Length (mm)130
Width (mm)6
Weight (g)3
Impedance (Ω)50
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x LWC-2400-DIP-03 (V1.0) 2.4 GHz Dipole Antenna

Frequently Asked Questions

What frequency does this antenna cover?
It is specified for 2400 MHz, the 2.4 GHz band used by WiFi, Bluetooth, Zigbee and many ISM devices.
What connector does it use?
It terminates in a UFL connector, so your device or cable must provide a matching UFL plug.
How much power can it handle?
The antenna is rated for up to 10 W, which covers typical low-power 2.4 GHz radio modules.
Is a cable or adapter included?
No. The package contains only the antenna, so any pigtail or adapter must be sourced separately.
Can it be used outdoors?
The data does not describe it as waterproof, so it is best kept in a dry, sheltered location within -30 to 60 degrees Celsius and 5 to 75 percent humidity.
What is the gain and radiation pattern?
Gain is 3 dBi with vertical polarization. The horizontal beamwidth is 360 degrees and the vertical beamwidth is 30 to 40 degrees.

Overview

The LAMBDOID LWC-2400-DIP-03 (V1.0) is a dipole antenna designed for the 2.4 GHz band. Dipole designs are among the most common antenna types in wireless electronics, and this model packages that approach in a narrow 130 mm by 6 mm body that weighs roughly 3 g. It ends in a UFL connector, so it can be routed inside small enclosures or attached directly to compact radio modules.

This antenna is aimed at builders and technicians who need a simple replacement or a first antenna for a 2400 MHz design. It is not a high-gain directional part; instead it provides an even horizontal pattern that suits general short-range wireless links.

Key Features

  • 2.4 GHz operation: centred on 2400 MHz for common WiFi, Bluetooth, Zigbee and ISM band equipment.
  • UFL termination: a small board-level connector that fits tight layouts.
  • 3 dBi gain: modest gain that keeps the radiation pattern broad rather than focused.
  • VSWR below 2.0: indicates a reasonable impedance match at the design frequency.
  • 10 W power handling: more than enough headroom for typical low-power radio modules.
  • Light and compact: about 3 g and only 6 mm wide, so it adds little bulk.

Specifications Explained

Frequency and impedance: the antenna is specified at 2400 MHz with a 50 ohm impedance, which is the standard feed impedance for most 2.4 GHz radio hardware. Matching those two figures to your module is the first step to good performance.

Gain and pattern: 3 dBi gain is a modest figure. The horizontal half-power beamwidth is listed at 360 degrees, so coverage spreads around the antenna rather than in one direction. Vertical beamwidth is 30 to 40 degrees, which is typical of a dipole.

VSWR and power: a VSWR below 2.0 means reflected power stays low at the operating frequency. The 10 W power handling rating covers common module output levels with margin.

Environment: the operating range of -30 to 60 degrees Celsius and 5 to 75 percent humidity suits indoor and sheltered installations. It is not described as waterproof, so keep it away from direct moisture.

Compatibility and Requirements

The antenna connects through a UFL jack, so the host device must provide a matching UFL plug or a UFL-to-UFL pigtail. The radio must operate in the 2.4 GHz band and present a 50 ohm feed. No mounting hardware or cable is included, so check your enclosure and cable plan before ordering.

Typical Uses

  • Replacing a damaged antenna on a 2.4 GHz module
  • WiFi, Bluetooth and Zigbee prototype builds
  • ISM band sensor and telemetry projects
  • Compact devices where a 130 mm antenna still fits

What's in the Box

One LWC-2400-DIP-03 (V1.0) 2.4 GHz dipole antenna.

Quick specs

Item Type
Dipole Antenna
Operating Frequency (MHz)
2400
Gain
3
Model No. / Name
LWC-2400-DIP-03 (V1.0)
Operating Temperature (°C)
-30° to 60° C
Humidity Range
5 – 75%
See all specifications