Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A standard E27 lamp holder with a built-in PIR motion sensor that switches your bulb on automatically when movement is detected. It runs on AC 170-250V and fits most indoor wall or ceiling light fittings.

Key Highlights

  • Built-in PIR sensor triggers the bulb automatically on movement
  • Standard E27 screw cap fits common household bulbs
  • Wide AC 170-250V input for different regional mains supplies
  • Compact 85mm diameter body suits wall and ceiling mounting
  • Lightweight 80g design simplifies installation
  • No separate sensor module or extra wiring needed

Ideal For

  • Homeowners adding motion-activated lighting to hallways or stairs
  • Renters who want a simple automatic light without major rewiring
  • Small shop or office owners lighting storage or utility areas
  • DIY installers comfortable with basic mains wiring
  • Anyone replacing a standard E27 holder with an automatic version

Buying Tip

Confirm that your local mains voltage is within AC 170-250V and that you have an E27 bulb suitable for the location before installing this holder.

Elecvora expert review

Our verdict

This holder is a straightforward solution for adding motion-triggered lighting to an E27 fixture without extra hardware. It is best suited to simple indoor installations where the user is comfortable with mains wiring.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines socket and PIR sensor in one unit
  • Standard E27 fitting accepts common bulbs
  • Wide AC 170-250V input range
  • Compact and lightweight for easy mounting

Cons

  • No maximum wattage or IP rating stated in the data
  • Requires mains wiring knowledge to install safely
  • Sensor behaviour and range are not specified

Best for

Indoor hallways, stairwells, and utility areas needing automatic lighting

Not ideal for

Outdoor or wet locations, or low-voltage DC systems

Specifications

Item TypeMotion Detector Light Holder
Additional Specs.Cap Type: E27
Power Supply Voltage (V)AC 170-250V
Length (mm)85
Width (mm)85
Weight (g)80
Shipping Weight0.1 kg
Shipping Dimensions10 × 10 × 10 cm

Frequently Asked Questions

What type of bulb does this holder use?
It uses a standard E27 screw-base bulb. You can fit any E27 bulb that is suitable for the holder and the installation environment.
What voltage does the holder require?
It operates on AC 170-250V. Check that your local mains supply falls within this range before use.
Does the light turn on automatically?
Yes. The built-in PIR sensor detects motion and switches the connected bulb on automatically.
Can I use this holder outdoors?
The product data does not specify an IP rating, so it should be treated as suitable for indoor use only unless confirmed otherwise.
What is included in the package?
Package contents are not specified in the available data. Please check the product listing or packaging for details.
How do I maintain the holder?
Switch off the power before cleaning. Wipe the exterior with a dry or slightly damp cloth when needed, and do not use abrasive cleaners.

Overview

The Generic E27 PIR Motion Sensor Lamp Holder is a practical way to add automatic, movement-based lighting to an existing E27 light point. Instead of fitting a separate motion detector alongside a lamp, this holder integrates a passive infrared sensor into the socket itself. When the sensor picks up movement in its field of view, it switches the connected bulb on. The result is hands-free lighting for areas where a manual switch is inconvenient or easy to forget.

With an 85mm diameter and a weight of 80g, the holder is compact enough for typical wall and ceiling fittings. It accepts standard E27 bulbs and operates from an AC 170-250V supply, covering many household and commercial mains voltages around the world.

Key Features

  • Integrated PIR sensor: detects motion and activates the bulb automatically, so you do not need a separate sensor unit.
  • E27 screw cap: works with the widely used E27 bulb base, giving you flexibility in bulb choice.
  • AC 170-250V input: suitable for a broad range of mains supplies within that voltage window.
  • Compact dimensions: 85mm length and width make it easy to fit in place of a standard holder.
  • Lightweight build: at 80g, it adds little strain to wall or ceiling fixtures.

Specifications Explained

E27 cap

The E27 designation refers to the 27mm Edison screw base, one of the most common bulb fittings. This means you can use a wide variety of E27 bulbs, provided the bulb is appropriate for the holder and the installation environment.

AC 170-250V supply

The holder is designed for mains voltages between 170V and 250V AC. Check that your local supply falls within this range before installation. It is not intended for low-voltage DC systems.

85mm diameter and 80g weight

These dimensions describe the physical size of the holder body. The 85mm width is similar to many standard surface-mounted lamp holders, so it can often replace an existing base without major modification. The low weight keeps mounting simple.

Compatibility and Requirements

This holder requires an E27 bulb and an AC mains supply within the 170-250V range. It is intended for indoor wall or ceiling lighting points. The product data does not specify a maximum bulb wattage, IP rating, or dimming capability, so choose a bulb and installation location that suit the holder's physical design and your local wiring regulations. If you are unsure about compatibility with your existing fixture or bulb, consult a qualified electrician.

Typical Uses

The automatic switching behaviour makes this holder useful in areas where lights are needed only when someone is present. Common applications include corridors, stairwells, entrances, storage rooms, utility areas, and other indoor spaces where hands-free lighting is convenient. It can also serve as a simple signal or night light when paired with a suitable low-output E27 bulb.

What's in the Box

Package contents are not specified in the available product data. Please check the listing or packaging for the exact contents before ordering.

Quick specs

Item Type
Motion Detector Light Holder
Additional Specs.
Cap Type: E27
Power Supply Voltage (V)
AC 170-250V
Length (mm)
85
Width (mm)
85
Weight (g)
80
See all specifications