
1 / 3 · Click to enlarge
AI Summary
This LANBOO rocker switch fits a 28 x 22 mm panel cutout and features a green LED rated for 9-24 V DC with a 2NO contact. It gives you a clear, illuminated on/off control for DC-powered equipment and DIY projects.
Key Highlights
- 28 x 22 mm panel cutout for standard mounting
- 2NO normally open contact configuration
- Green LED operates from 9 to 24 V DC
- Latching rocker action for on/off control
- Compact design fits tight control panels
- Suitable for DC equipment up to 24 V
Ideal For
- Makers building custom DC control panels
- Repair technicians replacing panel switches
- Owners of water dispensers and treadmills
- DIY electronics hobbyists
- Small equipment manufacturers
Buying Tip
Confirm your panel cutout is exactly 28 x 22 mm and your circuit runs on 9-24 V DC before ordering, as the LED is matched to that range.
Elecvora expert review
Our verdict
A straightforward illuminated rocker switch that does one job well: switching DC loads in the 9-24 V range with a clear visual indicator. It is best suited to panel builders who already know their cutout size and voltage.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated green LED simplifies status indication
- Standard 28 x 22 mm cutout fits many panels
- Latching action is convenient for on/off control
- Compact size for tight spaces
Cons
- LED only works within 9-24 V DC
- Package contents are not specified
- No detailed current rating provided in the data
Best for
DC control panels and equipment up to 24 V
Not ideal for
High-voltage AC switching or applications requiring a specific current rating
Specifications
| Manufacturer | LANBOO |
|---|---|
| Model No. / Name | Rocker Switch |
| Voltage Rating (V) | 9 to 24 |
| Install hole diameter | 28 x 22mm |
| Contact Type | 20 2NO |
| LED Voltage | 9 to 24V |
| Operating humidity | 35 to 85%RH |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Frequently Asked Questions
What size hole does this switch require?
What voltage does the green LED need?
What does 2NO mean?
Can I use this switch for AC mains voltage?
Is the switch latching or momentary?
What is included in the package?
Overview
The LANBOO LBCX2822 is a panel-mount rocker switch built for equipment that needs a visible, reliable power control. It combines a latching rocker mechanism with a green LED indicator, so you can see at a glance whether the circuit is live. The switch is designed around a 28 x 22 mm installation hole, a common size for control panels and front-panel cutouts on small appliances and DIY builds.
Key Features
- Illuminated green LED: The built-in LED runs on 9 to 24 V DC, matching many low-voltage DC systems.
- 2NO contact type: The normally open contact closes when the switch is latched on, making it suitable for simple on/off switching.
- Latching operation: The rocker stays in the selected position, so you do not need to hold it.
- Compact panel footprint: The 28 x 22 mm cutout keeps the switch small enough for crowded panels.
- Humidity tolerance: Rated for 35 to 85% RH, covering typical indoor operating conditions.
Specifications Explained
Voltage rating (9 to 24 V): This switch is intended for DC circuits within that range. The LED voltage matches the switch rating, so the indicator works without a separate driver in most 12 V or 24 V systems.
Install hole diameter (28 x 22 mm): This is the rectangular cutout size you need to prepare in your panel. Measure carefully before cutting, as the switch will not fit a smaller opening.
Contact type (20 2NO): The 2NO designation means two normally open contacts. When the rocker is switched on, the contacts close and complete the circuit.
Operating humidity (35 to 85% RH): The switch is designed to operate in moderately humid environments, but it is not specified for condensing or wet locations.
Compatibility and Requirements
Use this switch only with DC voltages between 9 and 24 V for the LED to function correctly. The panel must have a 28 x 22 mm cutout. Wiring should match the 2NO contact configuration: the circuit is open when the switch is off and closed when it is on. No additional LED resistor or driver is mentioned in the product data, so plan your wiring around the stated 9-24 V LED rating.
Typical Uses
This rocker switch suits a range of DC-powered equipment and projects, including water dispensers, treadmills, computer speakers, battery cars, and motorcycles. It is also a practical choice for custom control panels, test rigs, and DIY electronics where a compact illuminated on/off switch is needed.
What's in the Box
Package contents are not specified by the manufacturer. Please check the listing or packaging for details before ordering.
Quick specs
- Manufacturer
- LANBOO
- Model No. / Name
- Rocker Switch
- Voltage Rating (V)
- 9 to 24
- Install hole diameter
- 28 x 22mm
- Contact Type
- 20 2NO
- LED Voltage
- 9 to 24V



















