Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A red panel-mount rocker switch from LANBOO with a 28 x 22mm installation hole and 40 4NO contact type. Its IP65 rating and latching operation make it a tidy choice for equipment panels and replacement jobs.

Key Highlights

  • 28 x 22mm installation hole for standard panel cutouts
  • 40 4NO contact configuration for switching circuits
  • IP65 protection level against dust and water jets
  • Red rocker for clear visual status at a glance
  • Latching operation holds the selected position
  • Compact panel-mount body saves space on equipment

Ideal For

  • Equipment builders assembling control panels
  • Repair technicians replacing a worn 28 x 22mm rocker switch
  • Makers and DIY enthusiasts building enclosures
  • Workshop and garage electrical projects
  • Appliance and machinery maintenance work

Buying Tip

Measure your existing panel cutout before ordering, as this switch is designed specifically for a 28 x 22mm opening.

Elecvora expert review

Our verdict

A straightforward panel-mount rocker switch with a useful IP65 rating and a clear red rocker. It is a sensible choice when you need a latching control that fits a 28 x 22mm cutout.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • IP65 protection suits dusty and splash-prone panels
  • Latching action holds the selected position
  • Red rocker is easy to spot on a crowded panel
  • Standard 28 x 22mm cutout simplifies replacement

Cons

  • Package contents are not specified
  • Only the 40 4NO contact variant is described here
  • Panel cutout must match exactly for a secure fit

Best for

Panel-mounted equipment control and like-for-like switch replacement

Not ideal for

Projects needing a momentary action or a different contact arrangement

Specifications

ManufacturerLANBOO
Model No. / NameRocker Switch
Install hole diameter28 x 22mm
ColorRed
Contact Type40 4NO
Protection levelIP65
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What size hole does this switch need?
It is designed for a 28 x 22mm installation hole. Measure your panel before ordering to confirm the fit.
What does 40 4NO mean?
It is the contact type designation for this switch variant. Check it against your wiring plan to confirm it suits the circuit you want to control.
Is this switch latching or momentary?
It is a latching rocker switch, so it holds the position you select until it is pressed again.
Can it be used outdoors?
The IP65 rating gives protection against dust and water jets, but the switch is not described as suitable for continuous immersion.
What is included with the switch?
The package contents are not specified in the product data. Confirm with the listing or packaging if you need to know exactly what arrives.
How should I care for the switch?
Keep the rocker and panel free of grit and debris, and avoid prolonged soaking. Isolate power before cleaning or servicing the panel.

Overview

The LANBOO LBCX2822 is a rocker switch designed for panel mounting through a 28 x 22mm installation hole. It pairs a red rocker with a 40 4NO contact type and carries an IP65 protection level, so it can be used where dust and splashes are part of the working environment. The switch is a latching type, meaning it stays in the position you select until you press it again.

With its moderate footprint and simple panel-fit design, this switch suits equipment builders, repair technicians and makers who need a visible, tactile control point on a panel rather than a tiny board-level component.

Key Features

  • Panel cutout: 28 x 22mm installation hole for a neat, secure fit.
  • Contact type: 40 4NO configuration for circuit switching.
  • Protection: IP65 rating for resistance to dust and water jets.
  • Operation: Latching action that holds the selected state.
  • Colour: Red rocker for easy identification on a busy panel.
  • Brand: Manufactured by LANBOO.

Specifications Explained

Installation hole: 28 x 22mm

This is the size of the opening the switch is designed to sit in. Check your panel or enclosure before ordering, because a cutout that is too large will not hold the switch securely and one that is too small will need reworking.

Contact type: 40 4NO

The 40 4NO designation describes the switch contact arrangement. Match it against the circuit you intend to control so the switching behaviour suits your wiring plan.

IP65 protection

IP65 indicates protection against dust ingress and against water projected from a nozzle. That makes the switch a reasonable choice for equipment panels in workshops, garages and similar environments, though it is not intended for continuous immersion.

Latching operation

A latching rocker does not spring back when released. The circuit state you set remains until the rocker is pressed again, which is useful for equipment that should stay on or off without being held.

Compatibility and Requirements

The switch requires a panel opening of 28 x 22mm. Confirm the contact type matches your circuit before installation. No additional mounting hardware, connectors or accessories are stated in the supplied product data, so plan your wiring and panel preparation around the switch itself.

Typical Uses

  • Equipment control panels and enclosures
  • Replacement of a worn rocker switch with the same cutout
  • DIY and maker projects needing a panel-mounted switch
  • Workshop and garage electrical builds
  • Appliance and machinery control points

What's in the Box

The package contents are not specified for this listing. Please check the product data and any available packaging information before ordering if you need to confirm what is included.

Quick specs

Manufacturer
LANBOO
Model No. / Name
Rocker Switch
Install hole diameter
28 x 22mm
Color
Red
Contact Type
40 4NO
Protection level
IP65
See all specifications