Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A white panel-mount rocker switch with a 28 x 22 mm installation hole, 2NO contacts and a 9-24V LED indicator. It gives equipment panels a clear, latching on-off control point.

Key Highlights

  • 28 x 22 mm installation hole for panel mounting
  • 2NO contact type for normally open switching
  • LED rated 9 to 24V for status indication
  • White body for a clean panel appearance
  • Latching rocker action for stable on-off control
  • Resistive load rating up to 20A at 110V/250V AC

Ideal For

  • Panel builders assembling control boxes and enclosures
  • Technicians replacing a 28 x 22 mm rocker switch
  • Makers building custom equipment housings
  • Equipment manufacturers specifying panel controls
  • Hobbyists wiring 9-24V indicator circuits

Buying Tip

Measure your panel cutout and confirm it is 28 x 22 mm, and check that your indicator supply sits within 9 to 24V before ordering.

Elecvora expert review

Our verdict

A sensible panel switch choice when you need a defined 28 x 22 mm cutout, a 2NO contact set and a 9-24V indicator in one part. The white body and latching action make it easy to integrate into equipment panels.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear 28 x 22 mm installation size
  • 2NO contacts suit simple on-off control
  • 9-24V LED provides visible status
  • Latching rocker stays in position
  • Listed IP65 protection

Cons

  • Package contents are not specified
  • LED range must match your supply
  • Load must stay within the stated ratings

Best for

Panel-mounted on-off control with status indication

Not ideal for

Applications outside the stated voltage and load ratings

Specifications

ManufacturerLANBOO
Model No. / NameRocker Switch
Voltage Rating (V)9 to 24
Install hole diameter28 x 22mm
ColorWhite
Contact Type20 2NO
LED Voltage9 to 24V
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What size hole does this switch fit?
It is designed for a 28 x 22 mm installation hole. Measure your panel cutout before fitting.
What does 2NO mean?
2NO means two normally open contacts. The circuit is open at rest and closes when the rocker is actuated.
What voltage does the LED need?
The LED is rated for 9 to 24V. Use a supply within that range for the indicator.
Is the switch latching?
Yes, the rocker uses a latching action, so it stays in the selected position after actuation.
What is included in the box?
Package contents are not specified in the product data. Please confirm with the listing before ordering.
How should I care for the switch?
Keep the panel area clean and avoid exposing the switch to conditions beyond its listed IP65 protection.

Overview

The LANBOO LBCX2822 is a rocker switch built for panel installation. Its 28 x 22 mm installation hole gives it a moderate footprint that fits neatly into control panels, equipment housings and custom builds without taking up excessive space. The white body keeps labelling and layout easy to read, while the rocker action provides a familiar, positive feel when switching.

This version uses a 2NO contact configuration and an LED rated for 9 to 24V, so it can serve as both a control and a status indicator in one component. It is intended for builders, technicians and equipment makers who need a straightforward panel switch with defined electrical characteristics.

Key Features

  • Panel-mount design: fits a 28 x 22 mm installation hole.
  • 2NO contacts: normally open switching for control circuits.
  • LED indication: 9 to 24V LED shows the switch state.
  • Latching operation: the rocker stays in position after actuation.
  • White finish: suits clean, neutral panel layouts.
  • Resistive load rating: up to 20A at 110V/250V AC for suitable loads.

Specifications Explained

Installation hole: 28 x 22 mm

This is the cutout size the switch is designed for. Check your panel or housing against this measurement before ordering, since the switch is intended to seat into that specific opening.

Contact type: 2NO

2NO means two normally open contacts. In practice, the circuit is open in the resting position and closes when the rocker is actuated, which suits simple on-off control.

LED voltage: 9 to 24V

The indicator LED is specified for 9 to 24V. Match this to the supply available in your panel so the illumination works as intended.

Load rating

The switch is rated for resistive loads up to 20A at 110V/250V AC, with DC-13 ratings of 20A at 12V, 24V and 36V. Keep the load type and voltage within the stated figures.

Protection level

The switch is listed with IP65 protection, which relates to resistance against dust and water ingress when installed correctly.

Compatibility and Requirements

The switch requires a 28 x 22 mm panel opening and a supply within the 9 to 24V LED range for the indicator to work. The contact configuration is 2NO, so plan wiring around a normally open circuit. Confirm that your load falls within the stated resistive and DC ratings before installation.

Typical Uses

This rocker switch suits equipment panels, control boxes, power distribution layouts, custom enclosures and similar assemblies where a latching on-off control with a visible indicator is useful. Its moderate size makes it practical for both compact and larger panel designs.

What's in the Box

Package contents are not specified for this listing. Please confirm the included items with the product listing before ordering.

Quick specs

Manufacturer
LANBOO
Model No. / Name
Rocker Switch
Voltage Rating (V)
9 to 24
Install hole diameter
28 x 22mm
Color
White
Contact Type
20 2NO
See all specifications