Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A yellow panel-mount rocker switch from LANBOO that fits a 28 x 22 mm installation hole and uses a 40 4NO contact configuration. Its IP65 rating seals the switch against dust and water jets for dependable front-panel control.

Key Highlights

  • 28 x 22 mm installation hole for standard panel cutouts
  • 40 4NO contact configuration for panel control wiring
  • IP65 protection against dust and water jets
  • Latching rocker action holds the selected position
  • Bright yellow colour for quick visual identification
  • Compact panel-mount body keeps layouts tidy

Ideal For

  • Electronics builders assembling custom control panels
  • Repair technicians replacing a failed panel switch
  • Workshop equipment owners maintaining on/off controls
  • DIY enclosure and project builders needing a latching rocker
  • Maintenance teams servicing panels in dusty or splash-prone areas

Buying Tip

Measure your existing panel cutout and confirm it is 28 x 22 mm, and check that the 40 4NO contact arrangement suits your circuit before ordering.

Elecvora expert review

Our verdict

A tidy panel-mount rocker switch with a defined 28 x 22 mm cutout, a clear yellow face and an IP65 rating that suits workshop and light industrial panels. The main caution is that the supplied data does not state a voltage or current rating, so buyers must verify suitability for their circuit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Defined 28 x 22 mm cutout simplifies panel planning
  • IP65 protection suits dusty and splash-prone environments
  • Latching action holds the selected state
  • Bright yellow face is easy to identify

Cons

  • Voltage and current ratings are not stated in the product data
  • Package contents are not specified
  • Requires rear panel access for wiring

Best for

Builders and technicians fitting a clearly visible latching rocker into a 28 x 22 mm panel cutout

Not ideal for

Anyone who needs a documented high-current rating or a momentary switch action

Specifications

ManufacturerLANBOO
Model No. / NameRocker Switch
Install hole diameter28 x 22mm
ColorYellow
Contact Type40 4NO
Protection levelIP65
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What size hole does this switch fit?
It is designed for a 28 x 22 mm installation hole. Measure your panel cutout before ordering, as the opening cannot be adjusted once cut.
What does 40 4NO mean?
It is the contact type listed for this switch. Check it against your wiring plan or equipment documentation to confirm it matches your circuit.
Is this switch waterproof?
It carries an IP65 protection level, which means it is protected against dust and water jets. It is not described as suitable for continuous immersion.
Does the switch stay on when released?
Yes. It uses a latching rocker action, so it holds the position you select rather than springing back.
What is included in the package?
The package contents are not specified in the product data. Please confirm with the listing before ordering if this matters for your build.
How should I care for the switch?
Keep the rocker face clean and free of grit, and avoid harsh solvents on the yellow surface. Isolate power before cleaning around the panel.

Overview

The LANBOO LBCX2822 is a rocker switch designed for front-panel installation. It drops into a 28 x 22 mm cutout and presents a yellow rocker face that is easy to spot on a busy control panel. The contact type is listed as 40 4NO, and the switch uses a latching action, so it stays in the position you set rather than returning when released.

This is a component-level part rather than a finished accessory. It is aimed at people who are building, modifying or repairing electrical equipment and who already know the panel layout and wiring they need.

Key Features

  • Panel-mount fit: the 28 x 22 mm installation hole matches a defined cutout size, which simplifies planning a panel layout.
  • 40 4NO contact type: the contact configuration is stated on the product data, so you can check it against your wiring plan before ordering.
  • IP65 protection level: the switch is rated to keep out dust and water jets, which helps in dusty workshops or panels exposed to splashes.
  • Latching operation: the rocker holds its selected position, making it suitable for equipment that runs for extended periods.
  • Yellow face: the colour stands out against dark or neutral panels for quick identification.

Specifications Explained

Installation hole size

The 28 x 22 mm figure is the cutout the switch is designed to sit in. Check this against your panel before cutting, because a rectangular hole of this size is not adjustable after the fact.

Contact type 40 4NO

The contact type is given as 40 4NO. Use this designation to confirm the switch matches the circuit you intend to control, and refer to your equipment documentation if you are unsure how the contacts should be wired.

IP65 protection

IP65 indicates protection against dust ingress and against water jets. It is a useful rating for equipment used in workshops, garages or other environments where dust and moisture are present.

Latching rocker

A latching switch keeps the state you select. That makes it a natural fit for on/off control of equipment rather than for momentary signalling.

Compatibility and Requirements

The switch is specified for a 28 x 22 mm installation hole and a 40 4NO contact arrangement. Confirm both against your panel and wiring before purchase. The product data does not list a voltage or current rating, so check the requirements of your equipment and any relevant documentation before connecting the switch. Installation requires access to the rear of the panel for mounting and wiring.

Typical Uses

Because the data does not specify an application list, treat these as general examples of where a panel-mount latching rocker switch of this size is commonly used: control panels on workshop equipment, custom enclosures, repair and replacement work on existing panels, and DIY electronics projects that need a clearly marked on/off control. Match the switch to your own circuit requirements.

What's in the Box

The package contents are not specified in the product data. Please check the listing details before ordering if you need to confirm what is included.

Quick specs

Manufacturer
LANBOO
Model No. / Name
Rocker Switch
Install hole diameter
28 x 22mm
Color
Yellow
Contact Type
40 4NO
Protection level
IP65
See all specifications