Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 28x22mm panel-mount rocker switch with 20A 2NO contacts, latching action and a 9-24V yellow LED indicator. It provides clear, durable on-off control for DC equipment and vehicle panels.

Key Highlights

  • 28 x 22 mm installation hole for standard panel cutouts
  • 20A 2NO contact configuration for higher-current DC loads
  • Yellow LED indicator rated for 9 to 24V DC
  • Latching action holds position without continuous pressure
  • IP65 protection against dust and water ingress
  • Chrome-plated brass bezel for a clean panel finish

Ideal For

  • Electrical technicians building or repairing DC control panels
  • DIY enthusiasts working on battery cars and motorcycle accessories
  • Appliance repairers servicing water dispensers and treadmills
  • Makers designing custom power switching for computer speakers
  • Vehicle owners adding accessory circuits with visible status indication

Buying Tip

Measure your panel cutout carefully before ordering; the switch requires a 28 x 22 mm installation hole and the LED must be wired to a 9-24V DC supply.

Elecvora expert review

Our verdict

The LANBOO LBCX2822 offers a practical combination of a standard 28 x 22 mm cutout, 20A 2NO contacts and a clear 9-24V LED indicator. It suits DC control panels where a compact, latching switch with visible status is required.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 20A 2NO contacts support higher-current DC loads
  • Built-in 9-24V yellow LED gives clear status feedback
  • IP65 protection for dusty or damp panel environments
  • Latching action holds position reliably

Cons

  • LED voltage is limited to 9-24V DC
  • Package contents are not specified, so check what is included
  • Requires a precise 28 x 22 mm panel cutout

Best for

DC control panels and vehicle accessory switching needing a compact latching switch with LED indication

Not ideal for

Applications requiring AC mains switching above the stated ratings or non-standard panel cutouts

Specifications

ManufacturerLANBOO
Model No. / NameRocker Switch
Voltage Rating (V)9 to 24
Install hole diameter28 x 22mm
ColorYellow
Contact Type20 2NO
LED Voltage9 to 24V
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What is the installation hole size for this rocker switch?
The switch requires a rectangular installation hole measuring 28 x 22 mm.
What voltage does the LED require?
The yellow LED is rated for 9 to 24V DC.
What does 20A 2NO mean?
It means the switch has two normally open contacts rated for up to 20A, suitable for higher-current DC loads within the specified ratings.
Is the switch latching or momentary?
It has a latching operation type, so it stays in the selected position until pressed again.
What is included in the package?
Package contents are not specified by the manufacturer. Please confirm with your supplier before ordering.
How should I care for this switch?
Keep the panel seal clean and avoid exposing the switch to conditions beyond its IP65 rating. Check connections periodically for tightness.

Overview

The LANBOO LBCX2822 is a yellow panel-mount rocker switch built for straightforward on-off control of DC electrical equipment. It fits a 28 x 22 mm installation hole, making it suitable for many standard panel layouts. The switch uses a 20A 2NO contact arrangement and a latching operation type, so it stays in the selected position until you press it again. A yellow LED rated for 9 to 24V DC provides a visible status indication, which is useful in low-light installations or busy control panels.

Key Features

  • 20A 2NO contacts: designed to handle higher-current DC loads in compact equipment.
  • 28 x 22 mm cutout: a common panel size that keeps installation simple.
  • 9-24V LED: yellow illumination gives clear on-state feedback.
  • Latching action: two-position operation that holds without continuous pressure.
  • IP65 protection: resists dust and water ingress when properly mounted.
  • Chrome-plated brass bezel: provides a durable, finished look on the panel.

Specifications Explained

Voltage rating (9 to 24V): This range refers to the LED supply. Match your indicator circuit to this voltage for correct illumination. 20A 2NO contact type: 2NO means two normally open contacts, and 20A indicates the contact current rating for suitable DC loads. Installation hole diameter 28 x 22 mm: measure your panel cutout before ordering to ensure a proper fit. Latching operation: the switch remains in its last position, which is useful for equipment that must stay on or off without being held. IP65 protection: the enclosure is protected against dust and water jets when the switch is correctly installed in a panel.

Compatibility and Requirements

The switch is intended for panel mounting with a 28 x 22 mm cutout. The LED requires a 9 to 24V DC supply. The 20A 2NO contacts are suitable for DC control circuits within the stated ratings. No additional components are listed as included, so plan your wiring and panel preparation accordingly.

Typical Uses

This rocker switch is commonly used in water dispensers, treadmills, computer speakers, battery cars, motorcycles and other equipment that needs a compact, visible on-off control. Its latching action and LED indicator make it practical for vehicle dashboards, power control panels and DIY electrical projects.

What's in the Box

Package contents are not specified by the manufacturer. Please confirm the included items with your supplier before purchase.

Quick specs

Manufacturer
LANBOO
Model No. / Name
Rocker Switch
Voltage Rating (V)
9 to 24
Install hole diameter
28 x 22mm
Color
Yellow
Contact Type
20 2NO
See all specifications