Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by LANBOO, this automotive relays is a good fit for everyday home and hobby use. Main specs: manufacturer LANBOO; coil voltage 12V; contact type 1NO1NC. Check that your power source supplies 12V before connecting it.

Key Highlights

  • Manufacturer: LANBOO
  • Coil Voltage: 12V
  • Contact Type: 1NO1NC

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

ManufacturerLANBOO
Coil Voltage12V
Contact Type1NO1NC
Operation Modeno T-standard type
Contact Resistance (ohm)<50mOhm
Operating humidity35 to 85%RH
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The LBJ6A-11-LANBOO-Ultrathin Type Intermediate Relay(DC12V,6A,1NO1NC), made by LANBOO, is listed in our automotive relays range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: LANBOO
  • Coil Voltage: 12V (match this to your power supply; too high a voltage can damage the part)
  • Contact Type: 1NO1NC
  • Operation Mode: no T-standard type
  • Contact Resistance (ohm): <50mOhm
  • Operating humidity: 35 to 85%RH
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

LBJ6A-11-LANBOO-Ultrathin Type Intermediate Relay(DC12V,6A,1NO1NC) Thin intermediate relay 1. Size and structure: Size: Very thin, usually less than 10mm thick. Structure: Flat design, suitable for surface mounting technology (SMT), commonly found on PCB. Installation method: Mainly PCB mounting, can be installed by welding or insertion. 2. Contact capacity: Rated current: 6A Contact configuration: 1NO1NC 3. Applications: Electronic equipment: such as embedded systems, portable devices, communication equipment. Consumer electronics: such as household appliances, electronic toys. Small control circuits: used for signal transmission and small load control. 4. Advantages: Ultra-thin design, suitable for installation of high-density circuit boards and modern miniaturized electronic devices. Small size and light weight, suitable for portable devices and embedded systems.

Specifications: 

  1. Product number LBJ6A
  2. Contact type:  1NO1NC
  3. Pin type:  5pin
  4. Mode of operation:  no T-standard type
  5. Coil voltage: DC12V
  6. Resistive load 8A 250VAC,8A 30VDC
  7. Inductive load 2A 250VAC,2A 30VDC
  8. Contact resistance: <50mΩ
  9. Suction and release time:  <25ms
  10. Coil power consumption:  Approximately 0.9W(DC)/ Approximately 1.2VA(AC)
Note: For more technical information refer the datasheet in Attachments. 

Package Includes:  

1 x LBJ6A-11-LANBOO-Ultrathin Type Intermediate Relay(DC12V,6A,1NO1NC)

Quick specs

Manufacturer
LANBOO
Coil Voltage
12V
Contact Type
1NO1NC
Operation Mode
no T-standard type
Contact Resistance (ohm)
&lt;50mOhm
Operating humidity
35 to 85%RH
See all specifications