Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A sewable CR2032 coin cell holder with a built-in slide switch for easy on/off control. It provides four connection points and a secure battery connector for wearable projects.

Key Highlights

  • Integrated slide switch for convenient power control
  • Holds a standard 20mm coin cell battery such as CR2032
  • Four sewable connection points (two positive, two negative)
  • Strengthened battery connector prevents accidental pops
  • Compact 30mm x 30mm purple board
  • Lightweight at just 3 grams

Ideal For

  • Wearable electronics makers
  • E-textile hobbyists
  • STEM educators and students
  • Cosplay and costume creators
  • DIY crafters integrating electronics

Buying Tip

Remember to order a CR2032 coin cell battery separately, as it is not included with the holder.

Elecvora expert review

Our verdict

A well-designed, practical power module for wearable electronics that simplifies on/off control and battery swapping. The reinforced connector and sewable pads make it a reliable choice for e-textile projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated slide switch saves battery and avoids extra components
  • Four connection points for secure sewing
  • Strengthened battery connector holds coin cell firmly
  • Compact and lightweight

Cons

  • Battery not included
  • Requires sewing with conductive thread, which may be challenging for beginners

Best for

Wearable electronics projects needing a switchable coin cell power source

Not ideal for

Projects requiring higher voltage or current than a CR2032 can provide

Specifications

Item TypeBattery Holder
Length (mm)30
Width (mm)30
Weight (g)3
ColorPurple
Shipping Weight0.005 kg
Shipping Dimensions4 × 4 × 2 cm

What's in the box

  • 1 x LilyPad Coin Cell Battery Holder CR2032 Battery Module

Frequently Asked Questions

What type of battery does this holder use?
It is designed for 20mm coin cell batteries, such as CR2032.
Is the battery included?
No, the battery is not included. You will need to purchase a CR2032 or compatible coin cell separately.
Can I sew this board into fabric?
Yes, the four connection pads are designed for sewing with conductive thread. The board also has mounting holes for non-conductive thread.
Does the switch turn off the power completely?
Yes, the slide switch is in-line with the power, so it cuts off the battery when switched off.
What are the dimensions of the board?
The board measures 30mm by 30mm and weighs 3 grams.
How do I care for the battery holder?
Keep it dry and avoid bending the board. Remove the battery if the project will be stored for a long time to prevent leakage.

Overview

The LilyPad Coin Cell Battery Holder CR2032 Module is a sewable power board for wearable electronics. It holds a 20mm coin cell battery and includes an on-board slide switch, so you can power your project on and off without removing the battery or adding a separate switch. The board is purple, measures 30mm by 30mm, and weighs only 3 grams, making it suitable for embedding in fabric and small accessories.

Key Features

  • Built-in slide switch: Turn your project on or off with a simple slide, saving battery life and avoiding wear on the battery holder.
  • Sewable connection points: Four pads (two positive and two negative) allow secure stitching into conductive thread circuits.
  • Strengthened battery connector: The battery holder is reinforced to keep the coin cell firmly in place during wear and movement.
  • Compact and lightweight: At 30mm square and 3 grams, it adds minimal bulk to wearable designs.

Specifications Explained

Item Type: Battery Holder – this board is designed to hold and connect a coin cell battery to your circuit.

Length and Width: Both 30mm, giving a square footprint that fits neatly into small projects.

Weight: 3 grams – light enough to be sewn onto clothing or accessories without pulling.

Color: Purple – the standard LilyPad color, making it easy to identify in your parts collection.

Shipping Weight and Dimensions: 0.005 kg and 4 × 4 × 2 cm – compact packaging for low-cost shipping.

Compatibility and Requirements

This holder accepts 20mm coin cell batteries, such as CR2032. It is designed for use with LilyPad-compatible components and conductive thread. No additional switch is needed if you use the on-board slide switch. A coin cell battery is not included.

Typical Uses

Use this module to power LED patches, sensor boards, and other wearable electronics. It is ideal for e-textile projects where a small, switchable power source is needed. The four connection points make it easy to integrate into fabric circuits with conductive thread.

What's in the Box

1 x LilyPad Coin Cell Battery Holder CR2032 Battery Module.

Quick specs

Item Type
Battery Holder
Length (mm)
30
Width (mm)
30
Weight (g)
3
Color
Purple
Shipping Weight
0.005 kg
See all specifications