
1 / 4 · Click to enlarge
AI Summary
This 8 mm linear coin vibration motor provides crisp Z-axis haptic feedback at 235 Hz with 1.7 G acceleration. Its compact size and fast response make it ideal for wearables and handheld devices.
Key Highlights
- 8 mm diameter and 3.25 mm thickness for tight spaces
- Rated 1.8 VrmsAC, operating from 0.1 to 1.9 VrmsAC
- 235 Hz ±5 Hz resonant frequency for consistent vibration
- 1.7 G acceleration along the Z axis
- 80 mA rated current draw
- Linear resonant actuator design for fast response
Ideal For
- Designers of wearables and smartwatches needing compact haptic feedback
- Mobile phone and handheld device engineers integrating tactile alerts
- Makers building custom controllers or haptic prototypes
- Product developers replacing ERM motors with faster LRA technology
Buying Tip
Confirm your driver circuit can supply an AC signal in the 0.1–1.9 Vrms range at around 235 Hz, as this LRA will not run directly from a DC voltage.
Elecvora expert review
Our verdict
This linear coin motor offers a compact, fast-response haptic solution for space-limited designs. Its AC drive requirement means it demands a compatible driver, but the payoff is precise Z-axis vibration and long life.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small footprint (8 mm diameter, 3.25 mm thick)
- Fast response compared with ERM motors
- Stable 235 Hz resonant frequency
- Low 80 mA current draw
Cons
- Requires an AC drive signal, not direct DC
- No connector or leads pre-attached (soldering required)
- Vibration direction fixed to Z axis
Best for
Compact wearables and handheld devices needing crisp haptic feedback
Not ideal for
Simple DC projects without an LRA driver
Specifications
| Item Type | Linear Coin Type |
|---|---|
| Voltage Rating (V) | 0.1 to 1.9VAC |
| Current | 80 |
| Diameter (mm) | 8 |
| Input Voltage (VAC) | 0.1~1.9 |
| Rated Voltage (VDC) | 1.8, (VrmsAC) |
| Rated current (mA) | 80 |
| Frequency (Hz) | 235±5 |
| Acceleration (g) | 1.7 |
| Width (mm) | 3.25 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 9 × 7 × 1 cm |
What's in the box
- 1 x Linear Coin Vibration Motor
Frequently Asked Questions
Can I drive this motor with a DC voltage?
What is the resonant frequency and why does it matter?
What is included in the package?
How do I mount the motor?
What is the operating voltage range?
How much current does it draw?
Overview
This linear coin vibration motor is a linear resonant actuator (LRA) built into an 8 mm diameter coin package just 3.25 mm thick. It produces vibration along the Z axis with a rated acceleration of 1.7 G at a resonant frequency of 235 Hz ±5 Hz. The motor is rated for 1.8 VrmsAC and operates across a drive range of 0.1 to 1.9 VrmsAC while drawing 80 mA. Unlike eccentric rotating mass (ERM) motors, this LRA uses a spring-suspended coil and magnet system that responds quickly and is designed for long service life, making it suitable for modern haptic interfaces in compact electronics.
Key Features
- Compact coin format: 8 mm diameter and 3.25 mm thickness fit easily into slim device enclosures.
- Linear resonant design: Delivers fast response and consistent vibration compared with ERM motors.
- Z-axis vibration: Provides directed haptic feedback perpendicular to the mounting surface.
- Wide drive range: Operates from 0.1 to 1.9 VrmsAC with a rated voltage of 1.8 VrmsAC.
- Stable frequency: 235 Hz ±5 Hz resonant frequency for predictable tactile output.
- Low current draw: 80 mA rated current helps preserve battery life in portable devices.
Specifications Explained
Voltage rating (0.1 to 1.9 VrmsAC): This is an AC-driven LRA, not a simple DC motor. It requires an alternating drive signal within this range to vibrate; the rated 1.8 VrmsAC is the typical operating point for full output. Frequency (235 Hz ±5 Hz): The motor is designed to resonate at this frequency, where it delivers its rated acceleration most efficiently. Driving it near this frequency yields the strongest vibration. Acceleration (1.7 G): This indicates the peak vibration force along the Z axis. Current (80 mA): The rated current consumption at the rated voltage, useful for estimating power budget. Dimensions: 8 mm diameter and 3.25 mm thickness define the mounting footprint and clearance needed.
Compatibility and Requirements
This motor requires an AC drive signal within 0.1 to 1.9 VrmsAC and is intended for designs that include a compatible LRA driver or haptic controller. It is not a drop-in replacement for DC ERM motors without appropriate drive circuitry. Mounting must accommodate the 8 mm diameter and 3.25 mm thickness, and the vibration direction is along the Z axis. No additional accessories or connectors are included.
Typical Uses
Thanks to its small size and fast response, this linear coin motor is commonly used in mobile handsets, wearable devices such as smartwatches and fitness bands, and compact handheld gadgets that require tactile alerts or haptic feedback. It also suits portable medical devices, gaming controllers, and touch-based user interfaces where space is limited and precise vibration is desired.
What's in the Box
Package includes: 1 x Linear Coin Vibration Motor.
Quick specs
- Item Type
- Linear Coin Type
- Voltage Rating (V)
- 0.1 to 1.9VAC
- Current
- 80
- Diameter (mm)
- 8
- Input Voltage (VAC)
- 0.1~1.9
- Rated Voltage (VDC)
- 1.8, (VrmsAC)













