Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A fireproof fiberglass sack for charging, storing and carrying LiPo and Li-ion battery packs. It withstands continuous temperatures up to 1100°C and seals fast with a Velcro flap.

Key Highlights

  • Fireproof fiberglass fabric built for lithium battery handling
  • Withstands continuous temperatures up to 1100°C
  • Low thermal conductivity helps insulate against intense heat
  • Shock-resistant construction for rapid heating and cooling
  • Velcro flap closure seals the bag quickly and securely
  • Fabric handle for easy carrying to the bench or field

Ideal For

  • FPV pilots charging and storing LiPo packs
  • RC car and plane hobbyists transporting batteries
  • Robotics and DIY electronics builders using Li-ion cells
  • Makers who keep spare packs on a workshop shelf
  • Drone users who want a dedicated charging pouch

Buying Tip

Measure your largest battery pack against the 170 x 130 x 130 mm internal footprint before ordering, since the bag is sized for compact packs.

Elecvora expert review

Our verdict

A simple, low-cost safety layer for anyone who charges lithium packs indoors. It will not stop a fire by itself, but it buys time and contains heat and debris during a thermal event.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fireproof fiberglass fabric rated to 1100°C continuous
  • Low thermal conductivity and shock-resistant construction
  • Fast Velcro closure plus a carry handle
  • Compact 260 x 130 x 150 mm size and only 170 g

Cons

  • Batteries and charger are not included
  • Sized for compact packs only, so large multi-cell packs may not fit
  • Velcro closure is not airtight or fully sealed

Best for

Hobbyists charging and storing compact LiPo and Li-ion packs

Not ideal for

Large high-capacity battery banks that exceed the internal dimensions

Specifications

Item TypeLithium Battery Protection Bag
MaterialFireproof Fiberglass Fabric
Length (mm)260
Width (mm)130
Weight (g)170
ColorSilver
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.18 kg
Shipping Dimensions29 × 24 × 4 cm

What's in the box

  • 1 x Lithium Battery Explosion-Proof Protection Bag (260 x 130 x 150 mm)

Frequently Asked Questions

What is this bag made of?
It is made from fireproof fiberglass fabric with a silver finish, and it is rated for continuous temperatures up to 1100°C.
What size battery fits inside?
The bag is 260 x 130 x 150 mm externally with a listed internal footprint of 170 x 130 x 130 mm, so compact packs are the right fit.
Are batteries included?
No. Only the protection bag is included, so you supply your own LiPo or Li-ion packs and charger.
Can I charge a battery while it is inside the bag?
Yes, that is its main purpose. Route the charging leads out of the opening, close the Velcro flap and charge on a non-flammable surface.
Does it need any tools or power?
No. Installation is tool-free and the bag has no electronics; the Velcro flap is the only closure.
How should I care for the bag?
Keep it dry, avoid cutting or puncturing the fabric, and replace it if the material is damaged or has been exposed to a battery fire.

Overview

Lithium packs are the power source behind most RC models, drones, robots and DIY builds, but a damaged or overcharged cell can release intense heat very quickly. The Generic Lithium Battery Explosion-Proof Protection Bag gives you a dedicated place to charge, store and transport those packs. It is made from fireproof fiberglass fabric and is rated to withstand continuous temperatures up to 1100°C, so it is built to sit between you and a battery that misbehaves.

Key Features

  • Fireproof fiberglass fabric: a high-grade fire-retardant material chosen for lithium battery duty.
  • 1100°C continuous rating: designed to contain the heat of a thermal runaway event.
  • Low thermal conductivity: adds an insulation layer between the pack and its surroundings.
  • Shock-resistant build: copes with the rapid heating and cooling cycles a failing cell produces.
  • Velcro sealing flap: closes in seconds so the bag is ready before you plug in.
  • Carry handle: move packs from shelf to workbench or out to the field without juggling.

Specifications Explained

The bag measures 260 mm long, 130 mm wide and 150 mm high, with a listed internal footprint of 170 x 130 x 130 mm. In practice that means compact packs fit comfortably while the bag stays small enough to keep on a bench or in a flight case. At 170 g it adds almost nothing to your load, and the silver finish is easy to spot among your gear. The 2.7–5.5 V operating range covers the single-cell and small multi-cell packs this size of bag is intended for. Installation is tool-free, so there is nothing to wire or bolt on.

Compatibility and Requirements

Use the bag with lithium battery packs that fit within its listed dimensions. No tools, wiring or power supply are needed to use it; the Velcro flap is the only closure. Batteries are not supplied, so you will need your own LiPo or Li-ion packs and your usual charger.

Typical Uses

Keep a pack inside the bag while it charges on your bench, store charged packs in it between sessions, and carry it to the field for drone or RC flying. It is equally useful in a robotics or electronics workshop where loose cells sit on shelves.

What's in the Box

  • 1 x Lithium Battery Explosion-Proof Protection Bag, 260 x 130 x 150 mm

Quick specs

Item Type
Lithium Battery Protection Bag
Material
Fireproof Fiberglass Fabric
Length (mm)
260
Width (mm)
130
Weight (g)
170
Color
Silver
See all specifications