Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This drone frame parts is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor Module; rated voltage (vdc) 3.3 to 5; measurement range -25°C~100°C. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Item Type: Sensor Module
  • Rated Voltage (VDC): 3.3 to 5
  • Measurement Range: -25°C~100°C

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor Module
Rated Voltage (VDC)3.3 to 5
Measurement Range-25°C~100°C
Interface TypeI²C Bus
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.001 kg
Shipping Dimensions8 × 6 × 1 cm

Overview

The LM75 Temperature Sensor Module is listed in our drone frame parts range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor Module
  • Rated Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Measurement Range: -25°C~100°C (quoted range is usually line-of-sight; walls and interference shorten it)
  • Interface Type: I²C Bus (confirm your cable or board uses the same connector)
  • Sensor Type: Strain Gauge Based Load Cell
  • Operating Voltage (V): 2.7~5.5 (match this to your power supply; too high a voltage can damage the part)
  • Dimensions (L x W x H) mm: 170 x 130 x 130 (measure your mounting space before ordering)
  • Installation: Tool-Free, Easy Replacement

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This LM75 Temperature Sensor Module has been specifically designed to be used with the Raspberry Pi, but it can also be used with the Arduino. Simply plug the sensor into the RPi GPIO and you're ready to go! The module features Maxim's LM75 Digital Temperature Sensor!.  The LM75 temperature sensor includes a delta-sigma analog-to-digital converter and a digital over-temperature detector.

Features:

  1. Easy to use with Microcontrollers or even with normal Digital/Analog IC
  2. Small Profile
  3. Works with both 3.3V and 5V
  4. Supported on Raspberry Pi and Arduino
  5. LM75 IC
  6. I2C port
  7. Compatible with Raspberry Pi A+,B,B+/2

Package Includes: 

1 x LM75 Temperature Sensor Module

Quick specs

Item Type
Sensor Module
Rated Voltage (VDC)
3.3 to 5
Measurement Range
-25°C~100°C
Interface Type
I²C Bus
Sensor Type
Strain Gauge Based Load Cell
Operating Voltage (V)
2.7~5.5
See all specifications