
1 / 4 · Click to enlarge
AI Summary
A 10 µH surface-mount coupled inductor rated at 1.4A in a compact 6 x 6mm package with very low DC resistance. Its closed magnetic circuit and shielded construction make it a tidy fit for dense power converter layouts.
Key Highlights
- 10 µH inductance with 20% tolerance for predictable filtering
- 1.4A current rating suits small to medium power stages
- Low 0.07 mΩ DC resistance at 20°C reduces conduction loss
- Compact 6 x 6mm SMD footprint saves board space
- Closed magnetic circuit design limits leakage flux and EMI
- Lightweight 0.8g part for dense PCB assemblies
Ideal For
- Power supply designers building compact buck converters
- Electronics repair technicians replacing SMD inductors
- Makers and hobbyists assembling custom power boards
- Hardware engineers working on display and networking hardware
Buying Tip
Confirm your circuit's peak current stays within the 1.4A rating and that your PCB pads match the 6 x 6mm SMD footprint before ordering.
Elecvora expert review
Our verdict
A compact, low-resistance coupled inductor that fits neatly into small power stages. It offers a sensible balance of current rating and board space for general SMD designs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very low 0.07 mΩ DC resistance
- Compact 6 x 6mm footprint
- Closed magnetic circuit reduces EMI
- 1.4A rating suits many small power stages
Cons
- 20% tolerance requires design margin
- Single-unit pack suits prototyping more than volume production
- Current rating limits use in higher-power designs
Best for
Compact SMD power converters and filter circuits
Not ideal for
High-current power stages beyond the 1.4A rating
Specifications
| Manufacturer | Generic |
|---|---|
| Inductance | 10uH |
| Tolerance (%) | 20 |
| Mounting Type | SMD |
| Current Rating (A) | 1.4A |
| Length (mm) | 6 |
| Width (mm) | 6 |
| Weight (g) | 0.8 |
| DC Resistance(mΩ) at 20°C | 0.07 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x LPS6235-103MLC 10 µH 1.4A Coupled Inductor
Frequently Asked Questions
What is a coupled inductor used for?
Can I use this part in a buck converter?
What is the DC resistance of this inductor?
Is this a through-hole or surface-mount part?
How many inductors are included?
How should I store and handle it?
Overview
The LPS6235-103MLC is a coupled inductor designed for surface-mount assembly. It offers 10 µH of inductance with a 20% tolerance and a 1.4A current rating, packaged in a 6 x 6mm body that is just 3.5mm tall. With a DC resistance of 0.07 mΩ at 20°C, the part keeps resistive losses low for its size, which helps when board space and thermal headroom are both tight.
The inductor uses a closed magnetic circuit and a shielded construction. This limits leakage flux and helps reduce electromagnetic interference in dense layouts, making the component easier to place near sensitive circuitry.
Key Features
- 10 µH inductance with ±20% tolerance for stable filtering and energy storage.
- 1.4A current rating for small and medium power stages.
- Low DC resistance of 0.07 mΩ at 20°C to limit conduction losses.
- Compact SMD package measuring 6 x 6mm with a 3.5mm height.
- Closed magnetic circuit that reduces leakage flux and EMI.
- Lightweight build at approximately 0.8g per part.
Specifications Explained
Inductance and tolerance: 10 µH is a common value for switching power supplies and filter networks. The 20% tolerance means the actual value can sit within a defined band, so designs should allow for that variation when tuning a converter or filter.
Current rating: The 1.4A rating indicates the current the inductor is intended to handle in normal operation. Check your peak and RMS currents against this figure before selecting the part for a design.
DC resistance: At 0.07 mΩ at 20°C, the winding presents very little resistance, which translates into lower I²R losses and less heat during operation.
Footprint: The 6 x 6mm body with a 3.5mm height fits into compact layouts where taller through-hole parts would not work.
Compatibility and Requirements
This is a surface-mount device, so it requires a PCB with suitable SMD pads and a reflow soldering process. It is intended for designs that can accommodate a 6 x 6mm part and operate within the stated 1.4A current rating. Confirm pad geometry and clearance against your board layout before assembly.
Typical Uses
- Buck converter power stages
- Laptop and display power circuits
- Network communication equipment
- General SMD filtering and energy storage
What's in the Box
One LPS6235-103MLC 10 µH 1.4A coupled inductor.
Quick specs
- Manufacturer
- Generic
- Inductance
- 10uH
- Tolerance (%)
- 20
- Mounting Type
- SMD
- Current Rating (A)
- 1.4A
- Length (mm)
- 6













