Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact M4 stainless steel photoelectric switch that detects objects up to 30 mm away using diffuse reflection. It operates from 10 to 30 V with low standby current, making it easy to fit into small automated fixtures.

Key Highlights

  • 30 mm diffuse reflective detection range for small-object presence sensing
  • Wide 10 to 30 V operating voltage suits varied DC control systems
  • Low 9 mA no-load current keeps standby power modest
  • M4 stainless steel pipe body fits tight threaded mounting points
  • Rated for 0 to 50 °C operating environments
  • Compact 55 g shipping weight for easy integration

Ideal For

  • Automation technicians building compact presence-sensing fixtures
  • Makers and DIY electronics hobbyists adding object detection
  • Equipment builders needing a small threaded sensor
  • Maintenance teams replacing a micro photoelectric switch

Buying Tip

Confirm your supply voltage falls within 10 to 30 V and that the load you switch stays below the 150 mA maximum operating current before wiring.

Elecvora expert review

Our verdict

A practical micro photoelectric switch for short-range presence detection where space is tight. Its wide voltage range and low standby draw make it easy to integrate into small DC control setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact M4 stainless steel body fits tight spaces
  • Wide 10 to 30 V operating range
  • Low 9 mA no-load current
  • Diffuse sensing needs no separate reflector

Cons

  • Short 30 mm range limits placement flexibility
  • Narrow 0 to 50 °C operating window
  • Package contents not confirmed

Best for

Compact short-range presence and position sensing

Not ideal for

Long-distance or high-temperature detection tasks

Specifications

Item TypeSwitch
Model No. / NameFTD 03NO
Operating Voltage (V)10 to 30
No-Load Current (mA)9 mA
Max. Operating Current (A)150 mA
Frequency(Hz)120 Hz
Diameter (mm)M4
Detection Distance (mm)30 mm
Fitting MaterialStainless Steel pipe
Operating Temperature (°C)-0 to 50 Degree Celcius
Shipping Weight0.055 kg
Shipping Dimensions16 × 15 × 1 cm

Frequently Asked Questions

What voltage does this switch need?
It operates from 10 to 30 V DC. Choose a supply within that range and confirm the load stays under the 150 mA maximum operating current.
How far can it detect an object?
The rated detection distance is 30 mm. Keep targets within that range for reliable diffuse reflective sensing.
Does it need a reflector?
No. It is a diffuse reflective switch, so it detects light reflected back from the object itself.
What is included in the package?
Package contents are not confirmed in the product data. Verify the listing details before ordering if you need specific accessories.
Can it be used outdoors?
The operating temperature range is 0 to 50 °C. Outdoor use should be protected from conditions outside that window.
How do I mount it?
The body is an M4 stainless steel pipe, so it fits a matching threaded bracket or panel mounting point.

Overview

The M3 FTD-03NO is a micro diffuse reflective photoelectric switch housed in an M4 stainless steel pipe. It detects objects by emitting a light beam and reading the light reflected back from the target, so a separate reflector is not required. With a 30 mm detection distance, it is suited to close-range presence checks in compact machinery, fixtures and DIY electronics builds.

Operating voltage spans 10 to 30 V, and the switch draws only 9 mA with no load, which helps keep standby consumption low in continuously powered installations.

Key Features

  • Diffuse reflective sensing: detects objects that block or reflect the beam within 30 mm.
  • Flexible voltage range: works across 10 to 30 V DC supplies.
  • Low standby draw: 9 mA no-load current.
  • Compact threaded body: M4 stainless steel pipe for tight mounting.
  • Modest operating window: rated from 0 to 50 °C.

Specifications Explained

Detection distance

The 30 mm sensing range is deliberately short. This makes the switch useful for confirming that a small part is present at a specific point rather than for long-range detection.

Voltage and current

A 10 to 30 V input gives room to use common 12 V and 24 V DC control supplies. The 9 mA no-load current describes consumption when the output is not driving a load, while the 150 mA maximum operating current indicates the output load limit to respect.

Body and environment

The M4 stainless steel pipe body provides a durable threaded housing for panel or bracket mounting. The 0 to 50 °C operating temperature range means the sensor should be kept in typical indoor or protected equipment environments.

Compatibility and Requirements

The switch requires a DC supply within 10 to 30 V and a load that does not exceed the 150 mA maximum operating current. Mounting must suit an M4 threaded fitting. No additional reflector is needed for diffuse reflective operation.

Typical Uses

  • Small-part presence detection on compact conveyors and feeders
  • End-of-travel or position confirmation in DIY automation
  • Object counting in light-duty equipment
  • Presence sensing in model, RC and maker projects

What's in the Box

Package contents are not confirmed for this listing. Check the product data before ordering if a specific accessory is required.

Quick specs

Item Type
Switch
Model No. / Name
FTD 03NO
Operating Voltage (V)
10 to 30
No-Load Current (mA)
9 mA
Max. Operating Current (A)
150 mA
Frequency(Hz)
120 Hz
See all specifications