Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A four-piece set of stainless steel M3 Type B headed bed adjusting nuts with an 11 mm outer diameter. The wider head gives better grip and finer control when leveling a 3D printer bed by hand.

Key Highlights

  • Four stainless steel M3 headed nuts per set
  • 11 mm outer diameter for improved finger grip
  • 2.5 mm inner diameter suits M3 threaded fittings
  • Compact 11 x 6 mm body fits tight bed corners
  • Each nut weighs about 2 g for light bed movement
  • Useful spare for printer builds and maintenance

Ideal For

  • Hobbyists maintaining their own FDM 3D printers
  • Makers building or rebuilding a printer with M3 bed hardware
  • Technicians who service multiple machines
  • Anyone replacing hard-to-grip bed leveling nuts

Buying Tip

Measure the thread and clearance at your bed adjustment points first, since these nuts fit M3 hardware and are 11 mm wide and 6 mm tall.

Elecvora expert review

Our verdict

A simple, well-sized hardware upgrade for printers that use M3 bed adjustment screws. The wider head makes hand leveling more comfortable, though buyers must confirm their thread size and clearance first.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wider 11 mm head improves grip during adjustment
  • Stainless steel construction
  • Compact 11 x 6 mm size suits tight bed areas
  • Four-piece set covers a typical bed or provides spares

Cons

  • No screws, springs or tools included
  • Only suits M3-threaded bed hardware
  • Package contents are not confirmed in the listing

Best for

Owners of M3-based 3D printers who want easier manual bed leveling

Not ideal for

Printers that use non-M3 bed adjustment hardware or automatic leveling only

Specifications

Item TypeNut for 3D Printers, Nut
MaterialStainless Steel
Inner Diameter (mm)2.5
Outer Diameter (mm)11
Weight (g)2
Size (mm)11x6
Shipping Weight0.005 kg
Shipping Dimensions3 × 3 × 2 cm

Frequently Asked Questions

What are these nuts used for?
They are headed adjusting nuts for manually leveling a 3D printer bed. The wider head gives more grip than a standard M3 nut.
Will they fit my printer?
They are intended for bed hardware with M3 threads. Check the thread size and the 11 mm width clearance at your adjustment points before ordering.
Do they need power or electronics?
No. These are purely mechanical stainless steel nuts with no electrical parts.
What is included in the pack?
The listing is for four M3 headed bed adjusting nuts. Screws, springs and tools are not stated as included.
How much do they weigh?
Each nut weighs about 2 g, and the listed shipping weight for the set is 0.005 kg.
How should I care for them?
Keep them clean and free of filament debris, and check the thread fit if you move them between machines.

Overview

The M3 Headed Bed Adjusting Nut Type B is a purpose-made piece of 3D printer hardware for manual bed leveling. Instead of a plain M3 nut, each unit has a headed profile with an 11 mm outer diameter and a 6 mm height, giving you a broader surface to grip and turn. The 2.5 mm inner diameter is sized for M3 threaded fittings, and the stainless steel body keeps the part clean and durable through repeated adjustment.

This listing is for a four-piece set, so you can fit a full bed or keep spares in your maintenance drawer.

Key Features

  • Headed Type B profile: a wider top surface than a standard M3 nut for easier hand adjustment.
  • Stainless steel construction: a solid metal part that resists everyday wear.
  • 11 mm outer diameter: more contact area for controlled, incremental turns.
  • Compact footprint: at 11 x 6 mm, each nut fits into tight spaces around a bed carriage.
  • Lightweight: roughly 2 g per nut, keeping added mass minimal.
  • Four-piece pack: enough for a typical four-point bed setup or spares.

Specifications Explained

Outer diameter (11 mm): this is the main reason to choose a headed adjusting nut. The larger face gives your fingers or a small tool a better hold, so small corrections are easier to make than with a low-profile nut.

Inner diameter (2.5 mm): the bore is intended for M3 threaded hardware such as adjustment screws. Check your existing screw and spring arrangement before ordering.

Size (11 x 6 mm): the 6 mm height keeps the nut low enough for most bed assemblies while still offering a usable grip surface.

Material: stainless steel gives the nut a consistent, solid feel and helps it hold up to repeated turning.

Compatibility and Requirements

These nuts are designed for 3D printer bed leveling hardware that uses M3 threads. They are a standalone mechanical part and do not include screws, springs or tools. Confirm the thread size and clearance around your bed adjustment points before fitting.

Typical Uses

  • Manual leveling of a heated bed on an M3-based printer
  • Replacing worn or awkward-to-turn bed nuts
  • Keeping spares for printer builds and maintenance
  • Fine-tuning the nozzle-to-bed gap during setup

What's in the Box

Package contents are not specified for this listing. Please check the product images and listing details before ordering.

Quick specs

Item Type
Nut for 3D Printers, Nut
Material
Stainless Steel
Inner Diameter (mm)
2.5
Outer Diameter (mm)
11
Weight (g)
2
Size (mm)
11x6
See all specifications