Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A miniature M4 threaded photoelectric switch with a 70 mm diffuse detection range and an invisible light beam. It runs from 10 to 30 V and switches up to 120 mA, making it easy to fit presence sensing into tight fixtures and small builds.

Key Highlights

  • M4 stainless steel threaded body for tight, flush mounting
  • 70 mm diffuse-reflectance detection distance
  • Invisible light beam avoids visible glare at the sensing point
  • Wide 10 to 30 V operating voltage range
  • Low 9 mA no-load current draw
  • 120 mA maximum output current at 120 Hz

Ideal For

  • Automation builders working with compact fixtures
  • Maintenance technicians retrofitting tight machinery
  • Model and hobby engineers needing small presence sensing
  • Machine designers using 12 V or 24 V DC control systems
  • Small production setups counting or gating parts

Buying Tip

Confirm your supply is within 10 to 30 V DC and that the load you plan to switch stays under 120 mA before wiring the sensor in.

Elecvora expert review

Our verdict

A tidy micro sensor for close-range presence detection where space is the limiting factor. It is simple to mount and flexible on voltage, but the 70 mm range and 120 mA output ceiling keep it to light-duty work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small M4 threaded stainless steel body
  • Invisible beam keeps the sensing point discreet
  • Wide 10 to 30 V supply range
  • Low 9 mA no-load current

Cons

  • 70 mm detection distance limits mounting options
  • Output capped at 120 mA, so no direct heavy loads
  • Operating range only 0 to 50 °C

Best for

Compact fixtures and small automation builds needing close-range presence sensing

Not ideal for

Long-distance detection or switching high-current loads directly

Specifications

Item TypeSwitch
Model No. / NamePhotoelectric Switch
Operating Voltage (V)10 to 30
No-Load Current (mA)9 mA
Max Output Current (mA)120
Frequency(Hz)120 Hz
Diameter (mm)M4
Detection Distance (mm)70 mm
Fitting MaterialStainless Steel pipe
Operating Temperature (°C)-0 to 50 Degree Celcius
Shipping Weight0.054 kg
Shipping Dimensions17 × 16 × 1 cm

What's in the box

  • 1 x M4 FTD-04NO 70 mm photoelectric switch
  • 1 x screwdriver

Frequently Asked Questions

How does this switch detect an object?
It uses diffuse reflectance, meaning the target reflects the emitted invisible beam back to the sensor, which then signals that an object is present. No separate reflector is needed.
What voltage does it need?
It operates from 10 to 30 V DC. No-load current is about 9 mA, so the supply only needs to cover that plus your load.
How much load can the output drive?
The maximum output current is 120 mA. Use it with a relay, controller input or other light load within that limit rather than a high-current device.
What is the maximum detection distance?
The rated detection distance is 70 mm. Mount the sensor so the target passes within that range for reliable results.
What comes in the package?
You receive one M4 FTD-04NO 70 mm photoelectric switch and one screwdriver. Wiring, cable and power supply are not included.
How should I care for the sensor?
Keep the sensing face clean and free of dust or oil, mount it within the 0 to 50 °C operating range, and avoid physical impact to the stainless steel body.

Overview

The M4 FTD-04NO is a micro photoelectric switch that senses objects by diffuse reflection: the target reflects the emitted beam back to the sensor, and the internal circuit confirms whether an object is present. The beam is invisible, so the sensing point stays clean and unobtrusive in visible installations. Its M4 stainless steel pipe body is threaded for mounting through brackets, plates and small housings.

With a 70 mm detection distance, this switch is intended for close-range confirmation rather than long-distance scanning. It is a practical choice where space is limited and a conventional rectangular sensor will not fit.

Key Features

  • Diffuse reflectance sensing: detects objects that reflect the emitted beam, with no separate reflector required.
  • Invisible light beam: keeps the sensing area free of visible glare.
  • M4 stainless steel body: slim threaded housing for compact fixtures.
  • Flexible supply range: operates from 10 to 30 V.
  • Low standby draw: approximately 9 mA with no load.
  • 120 mA output: enough to drive a small load or signal input at up to 120 Hz.

Specifications Explained

Detection distance

The 70 mm rating is the working diffuse range. Plan the mounting position so the target passes within that distance, and keep the face of the sensor clear of obstructions.

Voltage and current

A 10 to 30 V supply range covers common 12 V and 24 V control systems. No-load current is about 9 mA, and the output can handle up to 120 mA, so check that your load or input stays within that limit.

Switching frequency

The 120 Hz frequency suits repeated presence checks and moderate-speed counting rather than high-speed motion timing.

Body and environment

The M4 stainless steel pipe housing resists ordinary workshop wear, and the 0 to 50 °C operating range fits indoor equipment and typical production areas.

Compatibility and Requirements

The switch needs a DC supply within 10 to 30 V and a load that does not exceed 120 mA on the output. Wiring and mounting hardware should suit the M4 thread. No controller, cable or power supply is listed as included, so confirm your own wiring and fixings before installation.

Typical Uses

  • Presence and position checks on small automated fixtures
  • End-of-travel or part-detection sensing in compact machinery
  • Model mechanisms and hobby automation projects
  • Counting or gating small parts on low-speed lines
  • Retrofit sensing in tight brackets where a larger sensor will not fit

What's in the Box

  • 1 x M4 FTD-04NO 70 mm photoelectric switch
  • 1 x screwdriver

Quick specs

Item Type
Switch
Model No. / Name
Photoelectric Switch
Operating Voltage (V)
10 to 30
No-Load Current (mA)
9 mA
Max Output Current (mA)
120
Frequency(Hz)
120 Hz
See all specifications