Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of 12 brass hex standoff spacers, each 10 mm tall with M4 female threads at both ends and a 6 mm across-flat body. They hold PCBs and components at a fixed distance and can be tightened with a wrench.

Key Highlights

  • 12 brass hex standoffs with M4 female threads at both ends
  • 10 mm spacer height separates boards from chassis and frames
  • 6 mm across-flat hex body accepts a wrench for tightening
  • 5 mm deep threaded holes at each end
  • Brass body resists oxidation and corrosion over time
  • Useful for PCB mounting and improved airflow around components

Ideal For

  • Makers building DIY electronics projects with custom PCB mounting
  • RC and quadcopter builders spacing boards on frames
  • PC builders mounting boards inside a chassis
  • Engineers prototyping motor driver and control board layouts
  • Hobbyists who need repeatable board separation and airflow clearance

Buying Tip

Confirm your screws are M4 and no longer than needed to engage the 5 mm deep holes at each end, so they do not bottom out before the joint is tight.

Elecvora expert review

Our verdict

A straightforward, well-made set of brass standoffs that does one job reliably: holding boards at a fixed 10 mm distance with M4 threads at both ends. The 12-piece count and wrench-friendly hex body make it a sensible pack for multi-point PCB mounting.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Brass body resists corrosion and oxidation
  • Hex profile allows tightening with a wrench
  • 12 pieces cover several mounting points
  • Female-female M4 threads suit two-sided fastening
  • Consistent 10 mm height for level board mounting

Cons

  • Screws are not included, so M4 hardware must be sourced separately
  • Hole depth of 5 mm limits usable screw engagement
  • Only one height and thread size is supplied in this pack

Best for

Hobbyists and engineers mounting PCBs at a fixed 10 mm spacing with M4 screws

Not ideal for

Projects needing male-female standoffs or a different height or thread size

Specifications

Quantity12 Pcs
Spacer Height (mm)10
Body ShapeHexagonal
Thread SizeM4
GenderFemale to Female
MaterialBrass
Hex Size Across Flat (mm)6
Hole Depth (mm)5
Shipping Weight0.095 kg
Shipping Dimensions8 × 5 × 2 cm
Item TypeBrass Hex Standoff Spacer

What's in the box

  • 12 x M4 x 10 mm female-female brass hex threaded pillar standoff spacers

Frequently Asked Questions

What thread size do these standoffs use?
Both ends have an M4 female thread, so M4 screws are required to fasten into them.
Are screws included with the standoffs?
No. The pack contains 12 standoff spacers only; M4 screws must be supplied separately.
How tall are the spacers?
Each standoff is 10 mm high, which is the gap it creates between the two surfaces it separates.
Can I tighten them with a tool?
Yes. The hexagonal body measures 6 mm across the flats, so a wrench can grip it for tightening.
How deep are the threaded holes?
Each threaded end is 5 mm deep, so choose screw lengths that engage within that depth.
What material are they made from?
They are made of brass, which resists oxidation and corrosion and provides good mechanical strength.

Overview

These brass hex standoff spacers give you a simple, repeatable way to mount a circuit board or component at a fixed distance from another surface. Each spacer is 10 mm tall and has an M4 female thread at both ends, so a screw can enter from either side. The hexagonal body is 6 mm across the flats, which lets you hold or tighten it with a wrench rather than by hand. The pack contains 12 pieces, enough to complete several mounting points on one build.

Key Features

  • Female-female M4 thread: a threaded hole at each end of the spacer for two-sided fastening.
  • 10 mm height: creates a consistent gap between boards and surrounding parts.
  • Hexagonal profile: the 6 mm across-flat body can be gripped with a wrench.
  • 5 mm hole depth: each threaded end accepts a screw to a depth of 5 mm.
  • Brass construction: resists oxidation and corrosion and offers good mechanical strength.
  • 12-piece pack: covers multiple mounting positions from one purchase.

Specifications Explained

Thread size M4 refers to the metric thread used at both ends, so matching M4 screws are needed to fasten through a board or panel into the spacer. Female to female means there is no protruding stud; both ends are threaded holes. Spacer height of 10 mm is the distance the standoff creates between the two surfaces it separates. Hex size across flat of 6 mm is the measurement taken across opposite flat faces of the body, which is the size a wrench needs to grip. Hole depth of 5 mm tells you how far a screw can travel into each end, which helps you choose screw lengths that engage fully without bottoming out.

Compatibility and Requirements

These standoffs require M4 screws to match the female threads; screws are not included. Because both ends are female, the standoff is suited to arrangements where a screw passes through a board or panel and threads into each end. Check that the 10 mm height and 6 mm across-flat body fit the clearance available in your project before installing.

Typical Uses

Common applications include mounting PCBs inside a computer chassis, separating boards on quadcopter frames, spacing motor driver boards, and lifting circuit boards away from other components in DIY electronics projects. Raising a board on standoffs also leaves space around components, which can help airflow where equipment runs warm.

What's in the Box

12 x M4 x 10 mm female-female brass hex threaded pillar standoff spacers.

Quick specs

Quantity
12 Pcs
Spacer Height (mm)
10
Body Shape
Hexagonal
Thread Size
M4
Gender
Female to Female
Material
Brass
See all specifications